Multimode supercontinuum generation in chalcogenide glass fibres.

Mid-infrared supercontinuum generation is considered in chalcogenide fibres when taking into account both polarisations and the necessary higher order modes. In particular we focus on high pulse energy supercontinuum generation with long pump pulses. The modeling indicates that when only a single polarisation in the fundamental mode is considered the obtainable supercontinuum bandwidth is substantially exaggerated compared to when both polarisations are taken into account. Our modeling shows that if the pump pulse is short enough (≤ 10 ps) then higher order modes are not important because of temporal walk-off. In contrast long pump pulses (≥ 40 ps) will efficiently excite higher order modes through Raman scattering, which will deplete the fundamental mode of energy and limit the possibility of obtaining a broadband supercontinuum.

Multi-milliwatt mid-infrared supercontinuum generation in a suspended core chalcogenide fiber.

A low-loss suspended core As(38)Se(62) fiber with core diameter of 4.5 µm and a zero-dispersion wavelength of 3.5 µm was used for mid-infrared supercontinuum generation. The dispersion of the fiber was measured from 2.9 to 4.2 µm and was in good correspondence with the calculated dispersion. An optical parametric amplifier delivering 320 fs pulses with a peak power of 14.8 kW at a repetition rate of 21 MHz was used to pump 18 cm of suspended core fiber at different wavelengths from 3.3 to 4.7 µm. By pumping at 4.4 µm with a peak power of 5.2 kW coupled to the fiber a supercontinuum spanning from 1.7 to 7.5 µm with an average output power of 15.6 mW and an average power >5.0 µm of 4.7 mW was obtained.

Hybrid polymer photonic crystal fiber with integrated chalcogenide glass nanofilms.

The combination of chalcogenide glasses with polymer photonic crystal fibers (PCFs) is a difficult and challenging task due to their different thermo-mechanical material properties. Here we report the first experimental realization of a hybrid polymer-chalcogenide PCF with integrated As2S3 glass nanofilms at the inner surface of the air-channels of a poly-methyl-methacrylate (PMMA) PCF. The integrated high refractive index glass films introduce distinct antiresonant transmission bands in the 480-900 nm wavelength region. We demonstrate that the ultra-high Kerr nonlinearity of the chalcogenide glass makes the polymer PCF nonlinear and provides a possibility to shift the transmission band edges as much as 17 nm by changing the intensity. The proposed fabrication technique constitutes a new highway towards all-fiber nonlinear tunable devices based on polymer PCFs, which at the moment is not possible with any other fabrication method.

Mid-infrared supercontinuum generation to 12.5µm in large NA chalcogenide step-index fibres pumped at 4.5µm.

We present numerical modeling of mid-infrared (MIR) supercontinuum generation (SCG) in dispersion-optimized chalcogenide (CHALC) step-index fibres (SIFs) with exceptionally high numerical aperture (NA) around one, pumped with mode-locked praseodymium-doped (Pr(3+)) chalcogenide fibre lasers. The 4.5um laser is assumed to have a repetition rate of 4MHz with 50ps long pulses having a peak power of 4.7kW. A thorough fibre design optimisation was conducted using measured material dispersion (As-Se/Ge-As-Se) and measured fibre loss obtained in fabricated fibre of the same materials. The loss was below 2.5dB/m in the 3.3-9.4µm region. Fibres with 8 and 10µm core diameters generated an SC out to 12.5 and 10.7µm in less than 2m of fibre when pumped with 0.75 and 1kW, respectively. Larger core fibres with 20µm core diameters for potential higher power handling generated an SC out to 10.6µm for the highest NA considered but required pumping at 4.7kW as well as up to 3m of fibre to compensate for the lower nonlinearities. The amount of power converted into the 8-10µm band was 7.5 and 8.8mW for the 8 and 10µm fibres, respectively. For the 20µm core fibres up to 46mW was converted.

Thulium pumped mid-infrared 0.9-9µm supercontinuum generation in concatenated fluoride and chalcogenide glass fibers.

We theoretically demonstrate a novel approach for generating Mid-InfraRed SuperContinuum (MIR SC) by using concatenated fluoride and chalcogenide glass fibers pumped with a standard pulsed Thulium (Tm) laser (T(FWHM)=3.5ps, P0=20kW, ν(R)=30MHz, and P(avg)=2W). The fluoride fiber SC is generated in 10m of ZBLAN spanning the 0.9-4.1µm SC at the -30dB level. The ZBLAN fiber SC is then coupled into 10cm of As2Se3 chalcogenide Microstructured Optical Fiber (MOF) designed to have a zero-dispersion wavelength (λ(ZDW)) significantly below the 4.1µm InfraRed (IR) edge of the ZBLAN fiber SC, here 3.55µm. This allows the MIR solitons in the ZBLAN fiber SC to couple into anomalous dispersion in the chalcogenide fiber and further redshift out to the fiber loss edge at around 9µm. The final 0.9-9µm SC covers over 3 octaves in the MIR with around 15mW of power converted into the 6-9µm range.