Complex Drug Delivery Systems: Controlling Transdermal Permeation Rates with Multiple Active Pharmaceutical Ingredients.

A transdermal drug delivery system (TDDS) is generally designed to deliver an active pharmaceutical ingredient (API) through the skin for systemic action. Permeation of an API through the skin is controlled by adjusting drug concentration, formulation composition, and patch design. A bilayer, drug-in-adhesive TDDS design may allow improved modulation of the drug release profile by facilitating varying layer thicknesses and drug spatial distribution across each layer. We hypothesized that the co-release of two fixed-dose APIs from a bilayer TDDS could be controlled by modifying spatial distribution and layer thickness while maintaining the same overall formulation composition. Franz cell diffusion studies demonstrated that three different bilayer patch designs, with different spatial distribution of drug and layer thicknesses, could modulate drug permeation and be compared with a reference single-layer monolith patch design. Compared with the monolith, decreased opioid antagonist permeation while maintaining fentanyl permeation could be achieved using a bilayer design. In addition, modulation of the drug spatial distribution and individual layer thicknesses, control of each drug's permeation could be independently achieved. Bilayer patch performance did not change over an 8-week period in accelerated stability storage conditions. In conclusion, modifying the patch design of a bilayer TDDS achieves an individualized permeation of each API while maintaining constant patch composition.

Abuse-deterrent properties of REMOXY® ER, a high-viscosity extended-release oxycodone formulation.

OBJECTIVE: These in vitro studies compared abuse-deterrent properties of REMOXY ER (extended-release oxycodone), a novel, high-viscosity gel formulation, versus the two currently marketed ER oxycodone formulations. METHODS: Tampering methods were tailored to each product to maximize oxycodone release with the least complexity, time, and effort, based on the physical/chemical properties of each formulation. Oral abuse was simulated by extracting oxycodone from each manipulated formulation in Common Ingestible Liquids and in Advanced Solvents (not ingestible and requiring additional separation). To simulate injection abuse, oxycodone was extracted from each manipulated formulation in low volumes of injection vehicles, heated or unheated. Inhalation abuse potential was assessed by volatilization. RESULTS: In oral abuse simulations, manipulated REMOXY ER released 2-22 percent of its oxycodone in 20 minutes in five Common Ingestible Liquids, versus 77-85 percent oxycodone released from OxyContin® ER in 5 minutes in four of the five. In six Advanced Solvents, REMOXY ER released 3-37 percent at 20 minutes, versus 55-89 percent released from OxyContin ER at 5 minutes. Minimal oxycodone was extracted from REMOXY ER in five injection vehicles, heated or unheated. In contrast, OxyContin ER released 65-87 percent of its oxycodone within 10 minutes in all vehicles, regardless of heating. Xtampza® ER released 96 percent of its oxycodone in a heated injection vehicle and released 50-60 percent in two unheated injection vehicles. Showing minimal inhalation abuse potential, 9 percent of oxycodone was vaporized from manipulated REMOXY ER at 20 minutes compared to 8.8 percent at 5 minutes for OxyContin ER. CONCLUSIONS: In these studies, REMOXY ER demonstrated robust and meaningful abuse-deterrence relative to OxyContin ER and Xtampza ER. PERSPECTIVE: Abuse-deterrent drugs were intended to help fight opioid abuse. Yet, the persistence of the opioid epidemic indicates that vast improvements in abuse-deterrent technology are sorely needed. A new, high-viscosity, ER oxycodone formulation showed much improved abuse-deterrent properties in simulations of oral, injection, and inhalation abuse, compared to earlier, first-generation formulations.

Use of Polyvinyl Alcohol as a Solubility-Enhancing Polymer for Poorly Water Soluble Drug Delivery (Part 1).

Polyvinyl alcohol (PVAL) has not been investigated in a binary formulation as a concentration-enhancing polymer owing to its high melting point/high viscosity and poor organic solubility. Due to the unique attributes of the KinetiSol® dispersing (KSD) technology, PVAL has been enabled for this application and it is the aim of this paper to investigate various grades for improvement of the solubility and bioavailability of poorly water soluble active pharmaceutical ingredients. Solid amorphous dispersions were created with the model drug, itraconazole (ITZ), at a selected drug loading of 20%. Polymer grades were chosen with variation in molecular weight and degree of hydroxylation to determine the effects on performance. Differential scanning calorimetry, powder X-ray diffraction, polarized light microscopy, size exclusion chromatography, and dissolution testing were used to characterize the amorphous dispersions. An in vivo pharmacokinetic study in rats was also conducted to compare the selected formulation to current market formulations of ITZ. The 4-88 grade of PVAL was determined to be effective at enhancing solubility and bioavailability of itraconazole.

Physical aging in pharmaceutical polymers and the effect on solid oral dosage form stability.

The application of a polymeric film to a solid oral dosage form can be an effective technique to modify drug release. Most polymers used for such purposes are amorphous in nature and are subject to physical aging. This physical aging phenomenon has been shown to cause changes not only in the mechanical and drug release properties of polymeric films, but also the permeability of these films due to a densification and decrease in free volume of the polymer as the material relaxes to an equilibrated thermodynamic state. Temperature, humidity, and additional excipients in the coating formulations have been shown to influence the aging process. This review article discusses the process of physical aging in films prepared from aqueous dispersions, describes various analytical techniques that can be used to investigate the aging process, and highlights strategies to prevent such aging.

Influence of an acrylic polymer blend on the physical stability of film-coated theophylline pellets.

The purpose of this study was to investigate the physical stability of a coating system consisting of a blend of two sustained release acrylic polymers and its influence on the drug release rate of theophylline from coated pellets. The properties of both free films and theophylline pellets coated with the polymer blend were investigated, and the miscibility was determined via differential scanning calorimetry. Eudragit RS 30 D was plasticized by the addition of Eudragit NE 30 D, and the predicted glass transition temperature (T(g)) of the blend was similar to the experimental values. Sprayed films composed of a blend of Eudragit NE 30 D/Eudragit RS 30 D (1:1) showed a water vapor permeability six times greater than films containing only Eudragit NE 30 D. The presence of quaternary ammonium functional groups from the RS 30 D polymer increased the swellability of the films. The films prepared from the blend exhibited stable permeability values when stored for 1 month at both 25 degrees C and 40 degrees C, while the films which were composed of only Eudragit NE 30 D showed a statistically significant decrease in this parameter when stored under the same conditions. Eudragit NE 30 D/Eudragit RS 30 D (1:1)-sprayed films decreased in elongation from 180% to 40% after storage at 40 degrees C for 1 month, while those stored at 25 degrees C showed no change in elongation. In coated pellets, the addition of Eudragit RS 30 D to the Eudragit NE 30 D increased the theophylline release rate, and the pellets were stable when stored at 25 degrees C for a period of up to 3 months due to maintenance of the physico-mechanical properties of the film. Pellets stored at 40 degrees C exhibited a decrease in drug release rate over time as a result of changes in film physico-mechanical properties which were attributed to further coalescence and densification of the polymer. When the storage temperature was above the T(g) of the composite, instabilities in both drug release rate and physical properties were evident. Stabilization in drug release rate from coated pellets could be correlated with the physico-mechanical stability of the film formulation when stored at temperatures below the T(g) of the polymer.

Influence of fumed silicon dioxide on the stabilization of Eudragit RS/RL 30 D film-coated theophylline pellets.

The objective of this study was to investigate the influence of various grades of fumed silicon dioxide on the drug release rate and physical aging of theophylline pellets coated with Eudragit RS 30 D and RL 30 D. Free films were assessed for both physicomechanical properties and water vapor permeability with respect to time and storage conditions. The release rate of theophylline was influenced by the physical properties of the silicon dioxide employed. As the particle size of the silica dioxide decreased, there was an increase in dispersion viscosity, as well as a decrease in the theophylline release rate from the coated pellets. Films prepared from formulas containing Aeroperl 300 had twice the water vapor transmission rate of films prepared from formulas containing Aerosil 200 VV and Cab-O-Sil M-5P and showed consistent moisture permeability values during storage for up to 1 month at 25 degrees C/0% relative humidity (RH). Scanning electron microscopy (SEM) imaging of pellets coated with a formulation containing Aerosil 200 VV or Cab-O-Sil M-5P demonstrated film structures that were homogenous, while those coated with a formulation containing Aeroperl 300 produced heterogeneous films with large particles of the excipient present within the polymeric matrix of the film. Stability in the drug release rate exhibited by pellets coated with a formulation containing Eudragit RS 30 D, 15% triethyl citrate (TEC), and 30% Aeroperl 300 was attributed to the stabilization of the moisture vapor transmission rate of the acrylic films. Increasing the concentration of Aeroperl 300 in the coating formulation increased the theophylline release rate from coated pellets.

Use of proteins to minimize the physical aging of EUDRAGIT sustained release films.

The objective of this study was to investigate the influence of two proteins, albumin and type B gelatin, on the physical aging of EUDRAGIT RS 30 D and RL 30 D coated theophylline pellets. The physicomechanical properties of sprayed films, thermal properties of cast films, influence of proteins on the zeta potential and particle size of the dispersion, and the release of proteins from cast films under simulated dissolution conditions were investigated. The release rate of theophylline decreased significantly over time from pellets coated with an acrylic dispersion containing 10% albumin when there was no acidification of the acrylic dispersion; however, when pellets were coated with an acidified EUDRAGIT/albumin dispersion, the theophylline release rate was stable for dosage forms stored in the absence of humidity. The drug release rate was faster for pellets coated with acrylic dispersions containing 10% gelatin compared to the albumin-containing formulations. When sprayed films were stored at 40 degrees C/75% RH, the water vapor permeability decreased significantly for both EUDRAGIT films and those containing EUDRAGIT and albumin; however, there was no significant change in this parameter when 10% gelatin was present. Albumin was released from the acrylic films when the pH of the dissolution media was below the isoelectric point of the protein while no quantitative release of gelatin was observed in pH 1.2 or 7.4 media. The effect of gelatin to prevent the decrease in drug release rate was due to stabilization in water vapor permeability of the film. Acidification of the polymeric dispersion resulted in electrostatic repulsive forces between albumin and the acrylic polymer, which stabilized the drug release rate when the dosage forms were stored in aluminum induction sealed containers at both 40 degrees C/75% RH and 25 degrees C/60% RH.

The influence of guaifenesin and ketoprofen on the properties of hot-melt extruded polyethylene oxide films.

Films containing polyethylene oxide (PEO) and a model drug, either guaifenesin (GFN) or ketoprofen (KTP), were prepared by hot-melt extrusion. The thermal properties of the hot-melt extruded films were investigated using differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) was used to examine the surface morphology of the films, and wide angle X-ray diffraction (XRD) was used to investigate the crystalline properties of the polymer, drugs and physical mixtures as well as the solid state structure of the films. The stability of the polymer was studied using gel permeation chromatography. The mechanical properties, including percent elongation and tensile strength of the films, were determined on an Instron according to American Society for Testing Materials (ASTM) procedures. The Hansen solubility parameter was calculated using the Hoftyzer or van Krevelen method to estimate the likelihood of drug--polymer miscibility. Both GFN and KTP were stable during the extrusion process. Melting points corresponding to the crystalline drugs were not observed in the films. Crystallization of GFN on the surface of the film was observed at all concentrations studied, however KTP crystallization did not occur until reaching the 15% level. Guaifenesin and ketoprofen were found to decrease drive load, increase PEO stability and plasticize the polymer during extrusion. The Hansen solubility parameters predicted miscibility between PEO and KTP and poor miscibility between PEO and GFN. The predictions of the solubility parameters were in agreement with the XRD and SEM results. The percent elongation decreased with increasing GFN concentrations and significantly increased with increasing levels of KTP. Both GFN and KTP decreased the tensile strength of the extruded film.

Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion.

The objective of this research project was to determine the physicochemical properties and investigate the drug release mechanism from ethyl cellulose (EC) matrix tablets prepared by either direct compression or hot-melt extrusion (HME) of binary mixtures of water soluble drug (guaifenesin) and the polymer. Ethyl cellulose was separated into "fine" or "coarse" particle size fractions corresponding to 325-80 and 80-30 mesh particles, respectively. Tablets containing 30% guaifenesin were prepared at 10, 30, or 50 kN compaction forces and extruded at processing temperatures of 80-90 and 90-110 degrees C. The drug dissolution and release kinetics were determined and the tablet pore characteristics, tortuosity, thermal properties and surface morphologies were studied using helium pycnometry, mercury porosimetry, differential scanning calorimetry and scanning electron microscopy. The tortuosity was measured directly by a novel technique that allows for the calculation of diffusion coefficients in three experiments. The Higuchi diffusion model, Percolation Theory and Polymer Free Volume Theory were applied to the dissolution data to explain the release properties of drug from the matrix systems. The release rate was shown to be dependent on the ethyl cellulose particle size, compaction force and extrusion temperature.