Effect of Cellulose-Based Bioplastics on Current LDPE Recycling.

The increased use of bioplastics in the market has led to their presence in municipal solid waste streams alongside traditional fossil-based polymers, particularly low-density polyethylene (LDPE), which bioplastics often end up mixed with. This study aimed to assess the impact of cellulose acetate plasticized with triacetin (CAT) on the mechanical recycling of LDPE. LDPE-CAT blends with varying CAT content (0%, 1%, 5%, 7.5%, and 10% by weight) were prepared by melt extrusion and analyzed using scanning electron microscopy, Fourier-transform infrared spectroscopy, thermal analysis (thermogravimetric and differential scanning calorimetry), dynamic rheological measurements, and tensile tests. The results indicate that the presence of CAT does not significantly affect the chemical, thermal, and rheological properties of LDPE, and the addition of CAT at different levels does not promote LDPE degradation under typical processing conditions. However, the addition of CAT negatively impacts the processability and mechanical behavior of LDPE, resulting in the reduced quality of the recycled material. Thus, the presence of cellulose-based bioplastics in LDPE recycling streams should be avoided, and a specific sorting stream for bioplastics should be established.

Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging.

One of the major applications (40% in Europe) of plastic is packaging, which is often printed to display required information and to deliver an attractive aesthetic for marketing purposes. However, printing ink can cause contamination in the mechanical recycling process. To mitigate this issue, the use of surfactants in an alkaline washing process, known as de-inking, has been employed to remove printing ink and improve the quality of recyclates. Despite the existence of this technology, there are currently no data linking the de-inking efficiency with typical printing ink compositions. Additionally, it is necessary to investigate the de-inking process under the process parameters of existing recycling plants, including temperature, NaOH concentration, and retention time. This study aims to evaluate the performance of commonly used printing inks with different compositions under various washing scenarios for plastic recycling in conjunction with different de-inking detergents containing surfactants or mixtures of surfactants. The results indicate that the pigments applied to the ink have no significant effect on the de-inking process, except for carbon black (PBk 7). Nitrocellulose (NC) binder systems exhibit high de-inkability (over 95%) under the condition of 55 °C and 1 wt.% NaOH. However, crosslinked binder systems can impede the de-inking effect, whether used as a binder system or as an overprint varnish (OPV). The de-inking process requires heating to 55 °C with 1 wt.% NaOH to achieve a substantial effect. Based on the findings in this work, breaking the Van der Waals forces, hydrogen bonds, and covalent bonds between the printing ink and plastic film is an essential step to achieve the de-inking effect. Further research is needed to understand the interaction between surfactants and printing inks, enabling the development of de-inkable printing inks and high-performance surfactants that allow for de-inking with less energy consumption. The surfactant and NaOH have a synergistic effect in cleaning the printing ink. NaOH provides a negative surface charge for the adsorption of the cationic head of the surfactant and can hydrolyze the covalent bonds at higher concentrations (>2 wt.%).

Bioleaching of valuable metals from spent LIBs followed by selective recovery of manganese using the precipitation method: Metabolite maximization and process optimization.

Despite the increased demand for resource recovery from spent lithium-ion batteries (LIBs), low Mn leaching efficiencies have hindered the development of this technology. A novel process was devised to enhance the dissolution of metals by producing citric acid using a molasses medium by Penicillium citrinum. This investigation used response surface methodology to investigate the influence of molasses concentration and media components on citric acid production, which demonstrated that molasses (18.5% w/w), KH2PO4 (3.8 g/L), MgSO4.7H2O (0.11 g/L), and methanol (1.2% (v/v)) were the optimum values leading to the production of 31.50 g/L citric acid. Afterward, optimum inhibitor concentrations (iodoacetic acid: 0.05 mM) were added to accumulate citric acid, resulting in maximum bio-production (40.12 g/L) of citric acid. The pulp density and leaching time effect on metals dissolution was investigated in enriched-citric acid spent medium. The suitable conditions were a pulp density of 70 g/L and a leaching duration of 6 days, which led to the highest dissolution of Mn (79%) and Li (90%). Based on the results of the TCLP tests, the bioleaching residue is non-hazardous, suitable for safe disposal, and does not pose an environmental threat. Moreover, nearly 98% of Mn was extracted from the bioleaching solution with oxalic acid at 1.2 M. XRD, and FE-SEM analyses were utilized for further bioleaching and precipitation mechanism analysis.

Hybrid leaching of tantalum and other valuable metals from tantalum capacitor waste.

We propose a novel integrated model for the recovery of tantalum from tantalum-rich waste using a combination of hydrometallurgical and bio-metallurgical processes. To this end, leaching experiments with heterotrophs (Pseudomonas putida, Bacillus subtilis and Penicillium simplicissimum) were carried out. The heterotrophic fungal strain leached manganese with an efficiency of 98%; however, no tantalum was detected in the leachate. An unidentified species did mobilise 16% tantalum in 28 days in an experiment with non-sterile tantalum capacitor scrap. Attempts to cultivate isolate and identify these species failed. The results of a range of leaching trials resulted in an effective strategy for Ta recovery. A bulk sample of homogenised Ta capacitor scrap was first subjected to microbial leaching using Penicillium simplicissimum, which solubilised manganese and base metals. The residue was subjected to the second leach using 4 M HNO3. This effectively solubilised silver and other impurities. The residue collected after the second leach was pure tantalum in concentrated form. The hybrid model produced derives from observations from previous independent studies and shows that we can effectively recover tantalum along with silver and manganese in an efficient and environmentally friendly manner from tantalum capacitor scrap.

Co-digestion of food waste and cellulose-based bioplastic: From batch to semi-continuous scale investigation.

Only few studies on the behaviour of bioplastics in anaerobic co-digestion could be found in literature and most of them are conducted in batch mode. Despite the fact that continuous experiments confirm or add new insight to the findings acquired from batch ones, there is still lack of such studies. This work aims to cover this gap, carrying out a semi-continuous anaerobic co-digestion of food waste and cellulose acetate (which its behaviour under anaerobic environment is also quite unexplored). After a first evaluation of the potential methane production from each substrate at batch scale, the semi-continuous co-digestion of food waste and cellulose acetate was carried out in three configurations. During the semi-continuous process, a methane yield of 331 NmlCH4/gVS was generated from the co-digestion of food waste and cellulose acetate while bioplastics specimens achieved a weight loss of about 45 %. The results were both lower than the one obtained from batch co-digestion, although methane production rates were comparable regardless of being fed with or without bioplastics. An increase was registered after 65 days of semi-continuous process, due to the accumulation of CA specimens. This confirms the different degradation trends between bioplastics and food waste.

Environmentally sustainable and cost-effective recycling of Mn-rich Li-ion cells waste: Effect of carbon sources on the leaching efficiency of metals using fungal metabolites.

Metals recovery from spent lithium coin cells (SCCs) is enjoying great attention due to environmental problems and metal-rich contents such as Mn and Li. Fungi can generate many organic acids, and metals can be dissolved, but sucrose is not an economical medium. The main objective of this study is to find a suitable carbon substrate in place of sucrose for fungal bioleaching. We have developed an environmentally friendly, cost-effective, and green method for recycling and detoxifying Mn and Li from SCCs using the spent culture medium fromPenicillium citrinumcultivation. Sugar cane molasses and sucrose were selected as carbon sources. Based on the extracted fungal metabolites, the effects of pulp density, temperature, and leaching time were assessed on metal dissolution. The most suitable conditions were 30 g/L of pulp density, a temperature of 40 °C, and 4 days of leaching time in spent molasses medium, which led to a high extraction of 87% Mn and 100% Li. Based on EDX-mapping analyses, it was found that the initial concentration of ∑ (Mn + C) in the SCCs powder was almost 100% while reaching nearly 6.4% after bioleaching. After bioleaching, an analysis of residual powder confirmed that metal dissolution from SCCs was effective owing to fungal metabolites. The economic study showed that the bioleaching method is more valuable for the dissolution of metals than the chemical method; In addition to improving bioleaching efficiency, molasses carbon sources can be used for industrial purposes.

Chemical and Microbial Leaching of Valuable Metals from PCBs and Tantalum Capacitors of Spent Mobile Phones.

We compared chemical and microbial leaching for multi-metal extraction from printed circuit boards (PCBs) and tantalum capacitor scrap. A mixed consortium of acidophiles and heterotrophic fungal strains were used in the experiments and compared to chemical leaching using specific acids (sulfuric, citric and oxalic acids). Under optimum conditions, 100% extraction efficiency of Cu, and nearly 85% of Zn, Fe, Al and Ni were achieved from PCB and tantalum capacitor scrap samples using sulfuric acid. The mixed consortium of acidophiles successfully mobilized, Ni and Cu (99% and 96%, respectively) while Fe, Zn, Al and Mn reached an extraction yield of 89, 77, 70 and 43%, respectively, from the PCB samples. For the tantalum capacitor samples, acidophiles mobilized 92% Cu, 88% Ni, 78% Fe, 77% Al, 70% Zn and 57% Mn. Metal mobilization from PCBs and tantalum capacitor scrap by A. niger filtrate showed efficient solubilization of Cu, Fe, Al, Mn, Ni, Pb and Zn at an efficiency of 52, 29, 75, 5, 61, 21 and 35% from PCB samples and 61, 25, 69, 23, 68, 15 and 45% from tantalum capacitor samples, respectively. Microbial leaching proved viable as a method to extract base metals but was less specific for tantalum and precious metals in electronic waste. The implications of these results for further processing of waste electronic and electrical equipment (WEEE) are considered in potential hybrid treatment strategies.

Effects of cellulose-based bio-plastics on the aerobic biological stabilization treatment of mixed municipal solid waste: A lab-scale assessment.

The aim of this work is to assess how the presence of cellulose-based bio-plastics influence the biological stabilization of mixed Municipal Solid Waste (MSW). For the scope, two cellulose acetate bio-plastics have been mixed with a synthetic mixed waste to create samples with and without bio-plastics. A self-induced biostabilization has been carried out for 7 and 14 days where temperature and off-gas have been monitored continuously. Results about temperature evolution, O2 consumption, CO2 production and respiratory quotient did not show a substantial difference regarding both the duration of the process and the presence of cellulose-based bio-plastics on the mixture. On the average, the temperature peak and the maximum daily O2 consumption and CO2 production were 52.2 °C, 35.81 g O2/kg DM *d and 48.95 g CO2/kg DM *d respectively. Disintegration of bio-plastics samples after 7 and 14 days were comparable (on the average 23.13%). The self-induced biostabilization gave its main contribution after 4 days and resulted almost finished at the end of the day 7 of the process. Results showed that cellulose-based bio-plastics did not give a negative effect on mixed MSW biological stabilization and suggest a possible management, aiming at energy recovery of the outputs.

The influence of bio-plastics for food packaging on combined anaerobic digestion and composting treatment of organic municipal waste.

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.

Municipal Solid Waste Management through Sustainable Landfilling: In View of the Situation in Karachi, Pakistan.

Open disposal is the most common technique used for municipal solid waste (MSW) management due to the absence of sanitary landfills in Pakistan. The major cities and small towns in Pakistan have become a showcase of negligence and mismanagement of MSW, which results in deterioration of the environmental and social-life quality. Moreover, research has proved that inefficient handling (disposal) of MSW results in uncontrolled emissions of greenhouse gases (GHGs), mainly methane, and adds a significant share in global climate change. This study aims to estimate methane emissions from MSW disposed of at dumpsites and compare the GHG mitigation potential of different landfill strategies in specific climate and waste compositions in Karachi. The GHG estimations are based on lab-scale investigations conducted by simulating landfill conditions through the landfill simulation reactor (LSR) experiment. The synthetic MSW sample representing the composition of MSW generated in Karachi was used in the LSR experiment. Environmental sustainability and GHG mitigation potential of different landfilling strategies was evaluated by analyzing gas formation potential (GP21) and respiration activity (RI4) at the end of the experiment. This study revealed that the quantity of solid waste annually disposed of at dumpsites in Karachi possesses the potential to release about 3.9 Mt CO2-eq. methane (with specific methane potential of 1.8 tCO2-eq./tonne DM disposed) due to the biological decomposition of the organic fraction. Results show that the fresh waste disposed of at landfill sites in Karachi possesses about 92% and 94% higher GP21 and RI4, respectively, than the German allocated criteria for mechanically and biologically treated (MBT) waste for landfills Furthermore, sanitary landfills with post-aeration conditions showed higher GHG mitigation potential and low biological activity in the waste. The second highest GHG mitigation potential and lowest biological activity of the waste was noticed from bioreactor landfills with post-aeration conditions. The third number in GHG mitigation and reduced waste activity was noticed in the waste sampled from bioreactors without aftercare approach. The least GHG mitigation potential was noticed from the uncontrolled waste dumping (existing) approach with high residual gas potential and respiration index level. This lab-scale landfill simulation study can provide baseline data for further research and planning the development of new sustainable landfills in Karachi, Pakistan and in the region.

Lab-scale and full-scale industrial composting of biodegradable plastic blends for packaging.

Background: The acceptance of compostable plastic packaging in industrial composting plants is not universal despite available certification due to the persistence of plastic residues after composting. To better understand this discrepancy, this study compared the disintegration rates of two blends designed for rigid packaging (polylactic acid based) and soft packaging (polybutylene succinate based) in lab-scale composting tests and in an industrial composting plant. Methods: A lab-scale composting test was conducted in triplicates according to ISO 20200 for 4, 8 and 12 weeks to check the disintegration potential of the blends. Duplicate test material were then exposed in the compost pile of an industrial composting plant for a duration of 3 weeks and compared with a supplementary lab-scale test of the same duration. Results: The rigid packaging samples (1 mm thickness) retained on average 76.4%, 59.0% and 55.7% of its mass after 4, 8 and 12 weeks respectively in the lab-scale. In the plant, the average remaining mass was 98.3%, much higher compared to the average of 68.9% after 3 weeks in the supplementary lab-scale test. The soft packaging samples (109±9 µm sample thickness) retained on average 45.4%, 10.9% and 0.3% of its mass after 4, 8 and 12 weeks respectively in the lab-scale. In the plant, a high average remaining mass was also observed (93.9%). The supplementary lab-scale test showed similar remaining mass but higher fragmentation after 3 weeks. Conclusions: The results show that the samples achieved significant disintegration in the lab-scale but not in the plant. The difference between the tests that might further contribute to the differing degradation rates is the composition and heterogeneity of the composting substrate. Therefore, the substrate composition and thermophilic composting duration of individual plants are important considerations to determine the suitability of treating compostable plastic in real-world conditions.

There is resistance from industrial composting plants to the treatment of compostable biodegradable plastics. This study aims to compare the disintegration rates of two new biodegradable plastic blends developed for rigid and soft packaging applications in controlled industrial composting conditions in the lab as well as under actual industrial composting conditions in a composting plant. Results show significant disintegration of the material in the lab-scale up to 12 weeks. However, there were notable differences in the degree of disintegration of the samples in the lab compared to real-world conditions after 3 weeks. The 1 mm thick polylactic acid-based blend for rigid packaging experienced much higher disintegration in the lab with 68.9% remaining mass after 3 weeks compared to 97.2% remaining mass in the industrial composting plant. The 109 µm thick polybutylene succinate-based blend for soft packaging had similar remaining masses comparing the lab and full-scale tests. However, the lab-test showed higher fragmentation after 3 weeks. The characteristics of the organic waste inputs are potential causes of the lower disintegration rates. The study highlights the need to better understand the real-world industrial composting conditions and their variations when evaluating composting as a treatment method for biodegradable plastics.

A Novel Dry Treatment for Municipal Solid Waste Incineration Bottom Ash for the Reduction of Salts and Potential Toxic Elements.

The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilot-scale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4. The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%), chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.

Influence of moisture content and leachate recirculation on oxygen consumption and waste stabilization in post aeration phase of landfill operation.

Sustainable completion of municipal solid waste landfills requires post-closure care after a time when utilization of landfill gas produced from biodecomposition of organic waste be not possible/or economically feasible. Research proved that in-situ aeration is a promising approach employed for landfill aftercare. The application of post aeration operation is targeted to achieve accelerated waste stabilization to avoid long term environmental and public health impacts from landfills. In in-situ aeration operation, consumption of supplied oxygen has significant influence on biological stabilization of solid waste placed in the landfills. The consumption of oxygen is regulated by operation parameters of landfill - one of the important is presence of moisture in landfill ecosystem. This research aims to assess the influence of moisture content and leachate recirculation on the oxygen consumption during post aeration phase of landfill operation. The effect of oxygen consumption on the extent of waste stabilization achieved after experiment was also assessed. Three lab-scale landfill simulation reactors (LSRs) were used - in two of three reactors (LSR-1 and LSR-3) operation was carried out in two phases: Anaerobic and post-aeration. One reactor (LSR-2) was operated under anaerobic condition throughout the experiment and used as control. To compare the oxygen consumption, conventional landfill (CLF) conditions without excess water addition and leachate recirculation were simulated in LSR-1 and the bioreactor landfill conditions (BRLF) with excess water injection and leachate recirculation were simulated in LSR-3. In CLF 46.4% of supplied oxygen was consumed during post aeration phase while in BRLF only 0.96% of oxygen consumption was noticed. In result of higher oxygen consumption, biostabilization rate of waste in CLF was 7% higher than BRLF at the end of experiment. This study demonstrated that, in presence of low moisture in landfill ecosystem optimal air distribution can be realized which results in enhanced waste oxidization and stabilization.

Bioplastic Production from Microalgae: A Review.

Plastic waste production around the world is increasing, which leads to global plastic waste pollution. The need for an innovative solution to reduce this pollution is inevitable. Increased recycling of plastic waste alone is not a comprehensive solution. Furthermore, decreasing fossil-based plastic usage is an important aspect of sustainability. As an alternative to fossil-based plastics in the market, bio-based plastics are gaining in popularity. According to the studies conducted, products with similar performance characteristics can be obtained using biological feedstocks instead of fossil-based sources. In particular, bioplastic production from microalgae is a new opportunity to be explored and further improved. The aim of this study is to determine the current state of bioplastic production technologies from microalgae species and reveal possible optimization opportunities in the process and application areas. Therefore, the species used as resources for bioplastic production, the microalgae cultivation methods and bioplastic material production methods from microalgae were summarized.

Assessment of Supercritical CO2 Extraction as a Method for Plastic Waste Decontamination.

Due to the lack of advanced methods to clean plastic waste from organic contaminants, this study aimed at evaluating supercritical extraction as a decontamination method. Oil-adhesive high-density polyethylene (HD-PE) oil containers were subjected to supercritical extraction using supercritical carbon dioxide. The extraction was conducted at 300 bar, applying various temperatures (i.e., 70, 80 and 90 °C). The study assessed the impact of temperature on the decontamination efficiency. The variation in the samples' quality was first analyzed using near infrared (NIR) spectroscopy. An analysis of the content of polycyclic aromatic hydrocarbons (PAHs) was followed. Samples treated at 70 and 80 °C showed higher extraction efficiencies, in spite of the lower extraction temperatures. The NIR analysis showed that the plastic specimens did not experience degradation by the supercritical decontamination method. Moreover, the NIR spectra of the extracted oil showed the presence of a wide range of compounds, some of which are hazardous. This has been confirmed by a GC-MS analysis of the extracted oil. Based on the provided assessment, the quality of the decontaminated HD-PE plastic samples-from a contamination point of view-is enhanced in comparison to untreated samples. The level of PAHs contamination decreased to be within the allowed limits defined by the REACH regulation, and also met the specifications of the German Product Safety Committee. This study proved the effectiveness of the supercritical extraction using CO2 in extracting organic contaminants from plastics, while maintaining their quality.

Outdoor cultivation of Chlorella sorokiniana in third generation biorefinery: Resource savings through medium recycling.

The reduction of resource requirements for the outdoor cultivation of Chlorella sorokiniana using 180 L flat panel photobioreactors through medium recycling was investigated in this study. Without medium recycling, algae grew in 13.6 d from 0.92 to 5.32 gL-1with a productivity of 0.32 gL-1d-1. For the production of 748 g algae dry weight (DW), 152gkg-1 N, 27 gkg-1 P and 231 Lkg-1 water were needed. A realistic cultivation model with the recycling of medium and a productivity of 0.4 gL-1d-1 was set up based on experimental data, in which the requirements decreased to 104gkg-1 N, 24 gkg-1 P and 141 Lkg-1 water. Compared to the production of lutein-containing plant Tagetes erecta, water and potassium requirements of up to 91% less and 96% respectively and higher biomass productivity by the factor 3.7 was achieved.

The degree and source of plastic recyclates contamination with polycyclic aromatic hydrocarbons.

In this research, the degree and source of recyclates contamination with polycyclic aromatic hydrocarbons (PAH) was studied in eight different polyolefin recyclate samples; four originating from post-consumer packaging waste and four originating from a mixed source (post-industrial, post-commercial, and post-consumer). The aim was to assess the applicability of these recyclates in the different products' categories. Furthermore, the impact of previous contamination with PAH was excluded by analysing pure plastics before and after undergoing simulated recycling processes. Polythene recyclates originating from post-consumer plastic packaging waste had lower concentrations of the 16-US-EPA PAH (922.15 ± 420.75 µg kg-1) in comparison to the ones of a mixed origin (2155.43 ± 991.85 µg kg-1), r = -0.35, p > 0.05. The degree of recyclates contamination with PAH was always within the REACH limits for consumer products (<1.0 mg kg-1). On the other hand, only polythene recyclate sample originating from post-commercial waste did not comply with the REACH limits for children articles (0.5 mg kg-1). Hence, the source of plastic waste defines the quality of recyclates. All in all, the results indicated that the contamination of polyolefin recyclates with PAH is attributed to the material's previous contamination, or the sorption of plastics to organic compounds from the surrounding environment. Exposing plastics containing PAH additives to heat during extrusion could result in further accumulation of PAH in plastics.

Decontamination and recycling of agrochemical plastic packaging waste.

Agrochemical containers shall undergo decontamination before being considered for recycling. This study provides an assessment on the feasibility of the triple-rinsing decontamination procedure, while evaluating the appropriateness of the material's quality for recycling. To achieve the objectives of the study, (1) the effectiveness of the decontamination procedure was investigated; (2) containers´ long storage times and changes on the polymer´s structure were assessed; and (3) the quality of the recycled material was tested. Results showed that the triple-rinsing procedure was ineffective for the container´s complete decontamination, yet a further washing step - performed during the simulation of the recycling process - allowed for an improved degree of decontamination for recycling. Photo-oxidation imposed significant changes on the chemical structure of the polymer, where the active ingredient could be detected by FTIR, even after the application of rinsing and extraction. The chemical structure of the bulk material has not changed, indicating that the pesticide mobilization was only confined to the surface. The mechanical tests showed material quality appropriateness, where tensile strength values were within the suggested ranges, providing a possibility for further utilization of this material when appropriate decontamination is applied.

Towards a high quality recycling of plastics from waste electrical and electronic equipment through separation of contaminated fractions.

The aim of this study is to provide an evaluation of the recyclability of plastics derived from electrical equipment from contamination standpoint. A database was created to find trends in potentially toxic elements (PTEs) and bromine concentrations; in relation to unit's application, color, polymer type, and production date. For this study, 142 kg of plastics derived from waste electrical and electronic equipment, from the collection group 5, were analyzed. Less than 1.5 % of the analyzed material indicated hazardous characteristics due to their PTEs concentrations (following RoHS and REACH). Regarding the bromine (Br) content, larger quantities of plastics showed recycling incompatibility; 71 parts with total weight of 11 kg (8 %-wt) contained Br concentrations >2000 mg kg-1. The highest average value of Pb, Cd, Hg and Cr combined falls under the application category 'tools', which was as well the trend in appliances from before 1990. The same trend was observed for Br and antimony (Sb) contents; high concentrations were found in appliances from the 'tools' category. This study concludes that plastics derived from colored appliances and appliances labeled as tools have to be evaluated before being sent for recycling, due to high contamination risks.

The impact of collection portfolio expansion on key performance indicators of the Dutch recycling system for Post-Consumer Plastic Packaging Waste, a comparison between 2014 and 2017.

The recycling network of post-consumer plastic packaging waste (PCPPW) was studied for the Netherlands in 2017 with material flow analysis (MFA) and data reconciliation techniques. In comparison to the previous MFA of the PCPPW recycling network in 2014, the predominant change is the expansion of the collection portfolio from only plastic packages to plastic packages, beverage cartons and metal objects. The analysis shows that the amounts of recycled plastics products (as main washed milled goods) increased from 75 to 103 Gg net and the average polymeric purity of the recycled products remained nearly constant. Furthermore, the rise in the amounts of recycled products was accompanied with a rise in the total amount of rejected materials at cross docking facilities and sorting residues at the sorting facilities. This total amount grew from 19 Gg in 2014 to 70 Gg gross in 2017 and is over-proportional to the rise in recycled products. Hence, there is a clear trade-off between the growth in recycled plastics produced and the growth in rejects and residues. Additionally, since the polymeric purity of the recycled plastics did not significantly improve during the last years, most of the recycled plastics from PCPPW are still only suited for open-loop recycling. Although this recycling system for PCPPW is relatively advanced in Europe, it cannot be considered circular, since the net recycling yield is only 26 ±â€¯2% and the average polymeric purity of the recycled plastics is 90 ±â€¯7%.