Theoretical Description, Synthesis, and Structural Characterization of ß-Na0.33V2O5 and Its Fluorinated Derivative ß-Na0.33V2O4.67F0.33: Influence of Oxygen Substitution by Fluorine on the Electrochemical Properties.

The structure of ß-Na0.33V2O4.67F0.33 has been investigated by both theoretical and experimental methods. It exhibits the same structure as that of the parent bronze ß-Na0.33V2O5. The partial substitution of oxygen by fluorine has little effect on the average structure and cell parameters, but the sodium environment changes significantly. Using DFT calculations, we determined the most stable positions of fluorine atoms in the unit cell. It was found that the partial replacement of oxide by fluoride takes mainly place in the coordination sphere of Na producing a shortening of the Na-anion bond lengths. We also analyzed the electronic properties based on density of states and Bader charge distribution. The crystallochemical situation of sodium ions in ß-Na0.33V2O4.67F0.33 oxyfluoride, detected by both experimental and computational methods, affects its mobility with respect to the parent oxide. The higher ionicity in the Na coordination sphere of ß-Na0.33V2O4.67F0.33 is related to a sodium ion diffusion coefficient, DNa+, that is 1 order of magnitude lower (1.24 × 10-13 cm2 s-1) than in the case of ß-Na0.33V2O5 (1.13 × 10-12 cm2 s-1). Electrochemical sodium insertion/deinsertion properties of the oxyfluoride have been also investigated and are compared to the oxide. Insertion/deinsertion equilibrium potential for the same formal oxidation state of vanadium increases due to fluorination (for instance reduction of V+4.3 occurs at 1.5 V in the oxide and at 1.75 V in the oxyfluoride). However, the capacity of Na0.33V2O4.67F0.33 at constant current is lower than in the case of ß-Na0.33V2O5 due to a less adequate morphology, a lower DNa+, and a lower oxidation state of vanadium owing to the aliovalent O/F substitution.

Redox Chemistry and Reversible Structural Changes in Rhombohedral VO2F Cathode during Li Intercalation.

Metal oxyfluorides are currently attracting much attention for next-generation rechargeable batteries because of their high theoretical capacity and resulting high energy density. Rhombohedral VO2F is promising because it allows two-electron transfer during electrochemical lithium cycling, with a theoretical capacity of 526 mAh g-1. However, the chemical changes it undergoes during operation are not clearly understood. In this work, a combination of synchrotron X-ray and neutron diffraction was employed to accurately describe the crystal structure of both pristine and lithiated VO2F, using samples with high crystallinity to overcome challenges in previous studies. The mechanism and reversibility of the lithium insertion was monitored in real time by high angular synchrotron diffraction measurements, performed in operando on a lithium battery in the high-voltage range: 3.9-2.3 V vs Li+/Li. Insertion of up to one lithium ion proceeds through a solid-solution reaction, while Rietveld refinements of neutron powder diffraction data revealed that the lithiated states adopt the noncentrosymmetric R3c framework, uncovering an octahedral Li-(O/F)6 coordination with reasonable Li-O/F bond lengths. This work further evaluates the redox changes of VO2F upon Li intercalation. By a comparison of changes in electronic states of all the elements in the compound, it clarifies the critical role of both anions, O and F, in the charge compensation through their covalent interactions with the 3d states of V. The clear evidence of participation of F challenges existing assumptions that its high electronegativity renders this anion largely a spectator in the redox reaction.

Structural and Electrochemical Study of Vanadium-Doped TiO2 Ramsdellite with Superior Lithium Storage Properties for Lithium-Ion Batteries.

Titanium-oxide-based materials are considered attractive and safe alternatives to carbonaceous anodes in Li-ion batteries. In particular, the ramsdellite form TiO2 (R) is known for its superior lithium-storage ability as the bulk material when compared with other titanates. In this work, we prepared V-doped lithium titanate ramsdellites with the formula Li0.5 Ti1-x Vx O2 (0≤x≤0.5) by a conventional solid-state reaction. The lithium-free Ti1-x Vx O2 compounds, in which the ramsdellite framework remains virtually unaltered, are easily obtained by a simple aqueous oxidation/ion-extraction process. Neutron powder diffraction is used to locate the Li channel site in Li0.5 Ti1-x Vx O2 compounds and to follow the lithium extraction by difference-Fourier maps. Previously delithiated Ti1-x Vx O2 ramsdellites are able to insert up to 0.8 Li(+) per transition-metal atom. The initial gravimetric capacities of 270 mAh g(-1) with good cycle stability under constant current discharge conditions are among the highest reported for bulk TiO2 -related intercalation compounds for the threshold of one e(-) per formula unit.

Synthesis and characterization of NaNiF3·3H2O: an unusual ordered variant of the ReO3 type.

A new hydrated sodium nickel fluoride with nominal composition NaNiF3·3H2O was synthesized using an aqueous solution route. Its structure was solved by means of ab initio methods from powder X-ray diffraction and neutron diffraction data. NaNiF3·3H2O crystallizes in the cubic crystal system, space group Pn3̅ with a = 7.91968(4) Å. The framework, derived from the ReO3 structure type, is built from NaX6 and NiX6 (X = O, F) corner-shared octahedra, in which F and O atoms are randomly distributed on a single anion site. The 2a × 2a × 2a superstructure arises from the strict alternate three-dimensional linking of NaX6 and NiX6 octahedra together with the simultaneous tilts of the octahedra from the cube axis (φ = 31.1°), with a significant participation of hydrogen bonding. NaNiF3·3H2O corresponds to a fully cation-ordered variant of the In(OH)3 structure, easily recognizable when formulated as NaNi(XH)6 (X = O, F). It constitutes one of the rare examples for the a(+)a(+)a(+) tilting scheme with 1:1 cation ordering in perovskite-related compounds. The Curie-like magnetic behavior well-reflects the isolated paramagnetic Ni(2+) centers without worth mentioning interactions. While X-ray and neutron diffraction data evidence Na/Ni order in combination with O/F disorder as a main feature of this fluoride, results from Raman and magic-angle spinning NMR spectroscopies support the existence of specific anion arrangements in isolated square windows identified in structural refinements. In particular, formation of water molecules derives from unfavorable FH bond formation.

Insight into the channel ion distribution and influence on the lithium insertion properties of hexatitanates A2Ti6O13 (A = Na, Li, H) as candidates for anode materials in lithium-ion batteries.

Li(2)Ti(6)O(13) and H(2)Ti(6)O(13) were easily synthesized from Na(2)Ti(6)O(13) by successive Na(+)-Li(+)-H(+) ion exchange. The crystal structures of Na(2)Ti(6)O(13), Li(2)Ti(6)O(13) and H(2)Ti(6)O(13) were investigated using neutron powder diffraction. Monovalent A(+) cations (Na, Li and H) have been located using difference Fourier analysis. Although monoclinic lattice parameters (space group C2/m) of the three titanates remain almost unchanged with retention of the basic [Ti(6)O(13)(2-)] network, monovalent Na, Li and H cations occupy different sites in the tunnel space. By comparing the structural details concerning the A(+) oxygen coordination, i.e. NaO(8) square prismatic coordination, LiO(4) square planar coordination and covalently bond H atoms, with results from (23)Na, (7)Li and (1)H NMR spectroscopy we were able to obtain a more detailed insight into the respective local distortions and anharmonic motions. We were able to show that the site that the A(+) cation occupies in the hexatitanate channel structure strongly influences the lithium insertion properties of these compounds and therefore their usefulness as electrode materials for energy storage.

Structural characterization and NMR study of NaNbWO(6) and its proton-exchanged derivatives.

The structural characterization of NaNbWO(6), prepared by the ceramic route, has been performed. Electron diffraction has shown the presence of two related phases in a 1:1 ratio, whose lattice parameters correspond to those of the well-known tetragonal tungsten bronzes (TTB) and those of a monoclinically distorted phase. In addition to basic unit cells, the morphology of the two phases has been found to be similar, but they present a slight difference in the W/Nb ratio. (1)H and (23)Na magic-angle spinning nuclear magnetic resonance (MAS-NMR) spectra of NaNbWO(6) and its proton-exchanged derivatives have been interpreted on the basis of the ideal TTB structure. The average structure and the morphology remain unchanged in Na(1-x)H(x)NbWO(6) derivatives. (1)H and (23)Na MAS-NMR spectroscopies have been used to monitor changes produced during exchange processes. It has been shown that the exchange of Na ions is mainly produced, but not exclusively, at tetragonal channels. However, a large amount of Na ions at the pentagonal channels do not exchange with protons, suggesting that these ions are needed to stabilize the TTB-like structure. A tentative distribution of sodium ions in the most-exchanged oxide, deduced from NMR results, approximately (Na(0.46))(p)(Na(0.08))(s)H(0.46)NbWO(6), has been proposed. NMR spectra of Na(1-x)H(x)NbWO(6) indicate that two different OH groups are formed upon exchanging. The study of samples hydrated with D(2)O allowed us to conclude that deuterons of adsorbed water exchange with protons of the two OH groups. The proton-deuteron exchange is slow at room temperature but is strongly enhanced at 90 degrees C. This observation relates to the proton conductivity displayed by exchanged products under a humid atmosphere.