Understanding the charge-transfer state and singlet exciton emission from solution-processed small-molecule organic solar cells.

Electroluminescence (EL) from the charge-transfer state and singlet excitons is observed at low applied voltages from high-performing small-molecule bulk-heterojunction solar cells. Singlet emission from the blends emerges upon altering the processing conditions, such as thermal annealing and processing with a solvent additive, and correlates with improved photovoltaic performance. Low-temperature EL measurements are utilized to access the physics behind the singlet emission.

Operational mechanism of conjugated polyelectrolytes.

Conjugated polyelectrolytes (CPEs) are versatile materials used in a range of organic optoelectronic applications. Because of their ionic/electronic nature, characterizing these materials is nontrivial, and their operational mechanism is not fully understood. In this work we use a methodology that combines constant-voltage-driven current-density transient measurements with fast current vs voltage scans to allow decoupling of ionic and electronic phenomena. This technique is applied to diodes prepared with cationic CPEs having different charge-compensating anions. Our results indicate that the operational mechanism of these devices is governed by electrochemical doping of the CPE. On the basis of the notion that the saturated depletion layer for the anions consists of the same π-conjugated backbone material, we discern how the extent and speed of formation of the doped region depend on the anion structure. Apart from addressing fundamental transport questions, this work provides a tool for future characterization of different CPEs and other similar systems.

Silaindacenodithiophene-based molecular donor: morphological features and use in the fabrication of compositionally tolerant, high-efficiency bulk heterojunction solar cells.

A novel solution-processable small molecule, namely, benzo[1,2-b:4,5-b]bis(4,4'-dihexyl-4H-silolo[3,2-b]thiophene-2,2'-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole (p-SIDT(FBTTh2)2), was designed and synthesized by utilizing the silaindacenodithiophene (SIDT) framework as the central D(2) donor unit within the D(1)AD(2)AD(1) chromophore configuration. Relative to the widely studied 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis[6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole] (p-DTS(FBTTh2)2), which contains the stronger donor fragment dithienosilole (DTS) as D(2), one finds that p-SIDT(FBTTh2)2 exhibits a wider band gap and can be used to fabricate bulk heterojunction solar cells with higher open circuit voltage (0.91 V). Most remarkably, thin films comprising p-SIDT(FBTTh2)2 can achieve exceptional levels of self-organization directly via solution deposition. For example, high-resolution transmission electron microscopy analysis shows that p-SIDT(FBTTh2)2 spin-cast from chlorobenzene organizes into crystalline domains with lattice planes that extend over length scales on the order of hundreds of nanometers. Such features suggest liquid crystalline properties during the evolution of the film. Moreover, grazing incidence wide-angle X-ray scattering analysis shows a strong tendency for the molecules to exist with a strong "face-on" orientation relative to the substrate plane. Similar structural features, albeit of more restricted dimensions, can be observed within p-SIDT(FBTTh2)2:PC71BM bulk heterojunction thin films when the films are processed with 0.4% diiodooctane (DIO) solvent additive. DIO use also increases the solar cell power conversion efficiencies (PCEs) from 1.7% to 6.4%. Of significance from a practical device fabrication perspective is that, for p-SIDT(FBTTh2)2:PC71BM blends, there is a wide range of compositions (from 20:80 to 70:30 p-SIDT(FBTTh2)2:PC71BM) that provide good photovoltaic response, i.e., PCE = 4-6%, indicating a robust tendency to form the necessary continuous phases for charge carrier collection. Light intensity photocurrent measurements, charge selective diode fabrication, and internal quantum efficiency determinations were carried out to obtain insight into the mechanism of device operation. Inclusion of DIO in the casting solution results in films that exhibit much lower photocurrent dependence on voltage and a concomitant increase in fill factor. At the optimum blend ratio, devices show high charge carrier mobilities, while mismatched hole and electron mobilities in blends with high or low donor content result in reduced fill factors and device performance.

Increased mobility induced by addition of a Lewis acid to a Lewis basic conjugated polymer.

Through simple addition of a Lewis acid to a conjugated polymer bearing a Lewis basic heteroatom, the hole transport of the polymer can be effectively p-doped resulting in a two-orders increase in hole mobility. The temperature dependent hole transport of a variety of Lewis acid concentrations are explored.

25th anniversary article: charge transport and recombination in polymer light-emitting diodes.

This article reviews the basic physical processes of charge transport and recombination in organic semiconductors. As a workhorse, LEDs based on a single layer of poly(p-phenylene vinylene) (PPV) derivatives are used. The hole transport in these PPV derivatives is governed by trap-free space-charge-limited conduction, with the mobility depending on the electric field and charge-carrier density. These dependencies are generally described in the framework of hopping transport in a Gaussian density of states distribution. The electron transport on the other hand is orders of magnitude lower than the hole transport. The reason is that electron transport is hindered by the presence of a universal electron trap, located at 3.6 eV below vacuum with a typical density of ca. 3 × 10¹7 cm⁻³. The trapped electrons recombine with free holes via a non-radiative trap-assisted recombination process, which is a competing loss process with respect to the emissive bimolecular Langevin recombination. The trap-assisted recombination in disordered organic semiconductors is governed by the diffusion of the free carrier (hole) towards the trapped carrier (electron), similar to the Langevin recombination of free carriers where both carriers are mobile. As a result, with the charge-carrier mobilities and amount of trapping centers known from charge-transport measurements, the radiative recombination as well as loss processes in disordered organic semiconductors can be fully predicted. Evidently, future work should focus on the identification and removing of electron traps. This will not only eliminate the non-radiative trap-assisted recombination, but, in addition, will shift the recombination zone towards the center of the device, leading to an efficiency improvement of more than a factor of two in single-layer polymer LEDs.

Tri-diketopyrrolopyrrole molecular donor materials for high-performance solution-processed bulk heterojunction solar cells.

Two new high-performance DPP-containing donor molecules employing a molecular architecture with three DPP chromorphores (tri-DPP) in conjugated backbones are synthesized and characterized. The two tri-DPP molecules with only a structural difference on alkyl substitutions, when blended with PC71 BM, lead to power conversion efficiencies up to 4.8 and 5.5%, respectively.