The Oswestry-Bristol Classification.

AIMS: Trochlear dysplasia is a significant risk factor for patellofemoral instability. The Dejour classification is currently considered the standard for classifying trochlear dysplasia, but numerous studies have reported poor reliability on both plain radiography and MRI. The severity of trochlear dysplasia is important to establish in order to guide surgical management. We have developed an MRI-specific classification system to assess the severity of trochlear dysplasia, the Oswestry-Bristol Classification (OBC). This is a four-part classification system comprising normal, mild, moderate, and severe to represent a normal, shallow, flat, and convex trochlear, respectively. The purpose of this study was to assess the inter- and intraobserver reliability of the OBC and compare it with that of the Dejour classification. METHODS: Four observers (two senior and two junior orthopaedic surgeons) independently assessed 32 CT and axial MRI scans for trochlear dysplasia and classified each according to the OBC and the Dejour classification systems. Assessments were repeated following a four-week interval. The inter- and intraobserver agreement was determined by using Fleiss' generalization of Cohen's kappa statistic and S-statistic nominal and linear weights. RESULTS: The OBC showed fair-to-good interobserver agreement and good-to-excellent intraobserver agreement (mean kappa 0.68). The Dejour classification showed poor interobserver agreement and fair-to-good intraobserver agreement (mean kappa 0.52). CONCLUSION: The OBC can be used to assess the severity of trochlear dysplasia. It can be applied in clinical practice to simplify and standardize surgical decision-making in patients with recurrent patella instability. Cite this article: Bone Joint J 2020;102-B(1):102-107.

Properties and Function of the Flexor Hallucis Capsularis Interphalangeus Tendon.

INTRODUCTION: The fibrocartilagenous plantar plates of the forefoot are biomechanically important, forming the primary distal attachment for the plantar aponeurosis. They are integral to the function of the windlass mechanism in supporting the arches of the foot in gait. Dissection of the cadaveric hallux revealed an organised sagittal thickening of the dorsal side of the flexor hallucis longus (FHL) sheath, which attached the interphalangeal plantar plate to the metatarsophalangeal (MTP) plantar plate. A description of a similar structure was made in 1984 when it was termed the flexor hallucis capsularis interphalangeus (FHCI) - however, it has not been researched since, and we aim to study it further and identify its characteristics. METHOD: Eight specimens were dissected from four cadavers. Two were stained and examined under magnification in both polarized and non polarized light. The remaining 6 were subjected to micrometer testing of their tensile properties. RESULTS: Both the histological features and mechanical properties were consistent with tendon; with cross sectional area, ultimate tensile strength and stiffness varying between specimens. CONCLUSIONS: Based on its location and properties, the FHCI tendon may be involved in limiting dorsiflexion of the first MTP joint and could have clinical relevance in pathological processes around both the first and second MTP joints. Clin. Anat., 33:689-695, 2020. © 2019 Wiley Periodicals, Inc.

External rotation bracing for first-time anterior dislocation of the shoulder: A discontinued randomised controlled trial comparing external rotation bracing with conventional sling.

INTRODUCTION: Itoi et al. introduced the concept of bracing in abduction and external rotation to treat traumatic anterior shoulder dislocations. However, controversy remains as studies have reported variable results. Our study investigates whether there is a difference in outcomes between treatment with a conventional sling or external rotation brace. METHODS: A prospective, multi-centre randomised control trial was conducted between 2006 and 2010. The study was discontinued early with 72 (36 cases in each group) first-time anterior shoulder dislocations recruited. RESULTS: The re-dislocation rate over 24 months was comparable 30% (95% CI: 17-47) sling vs. 24% (95% CI: 13-41) external rotation bracing. Sixteen percent (95% CI: 7-32) of sling patients and 12% (95% CI: 5-27) of external rotation-bracing patients had shoulder stabilisation surgery within 24 months of the initial dislocation (p > 0.05). There was no difference in OSI scores at 24 months between the two treatment groups and intolerability of the external rotation brace was high. CONCLUSION: Recruitment to this study was difficult, and lost-to-follow-up rates were high leading to early discontinuation of the study. The results suggest that ER bracing is unlikely to provide clinical benefit in traumatic first-time anterior shoulder dislocation.

Predictors of fracture healing in patients with recalcitrant nonunions treated with autologous culture expanded bone marrow-derived mesenchymal stromal cells.

The study reports the prospective outcome of treating severe recalcitrant fracture nonunion in patients with autologous bone marrow-derived mesenchymal stromal cells (BMSC) from 2003 to 2010 and analyze predictors of union. Autologous BMSC were culture expanded and inserted at nonunion site with or without carriers in addition to surgical stabilization of the fracture. Radiological union was ascertained by musculoskeletal radiologists on plain radiographs and/or CT scans. A logistic regression analysis was performed with cell-expansion parameters (cell numbers, cell doubling time) and known clinical factors (e.g., smoking and diabetes) as independent variables and fracture union as the dependent variable to identify the factors that influence bony healing. An Eq5D index score assessed the effect of treatment on general quality of health. A total of 35 patients (mean age 51+/-13 years) with established nonunion (median 2.9 years, 1-33) and, at least one failed nonunion surgery (median 4,1-14) received treatment. Fracture union was achieved in 21 patients (60%; 95%CI 44-75) at 2.6 years. Multiple penalized logistic regression revealed faster cell doubling time (p = 0.07), absence of diabetes (p = 0.003), less previous surgeries (p = 0.008), and lower age at cell implantation (p = 0.02) were significant predictors for fracture union. A significant increase in Eq5D index (p = 0.01) was noted with a mean rise of the score by 0.34 units (95%CI 0.11-0.58) at 1 year following the study. In summary, the study revealed cell doubling time as a novel in vitro parameter in conjunction with age, multiple surgeries, and diabetes as being significant predictors of the fracture union. © 2018 The Authors. Journal of Orthopaedic Research® Published by Wiley Periodicals, Inc. J Orthop Res 37:1303-1309, 2019.

Efficacy of hip resurfacing arthroplasty: 6 year results from an international multisurgeon prospective cohort study.

Metal-on-metal hip resurfacing is undertaken worldwide. This procedure helps preserve femoral bone stock and allows patients to return to high activity sports. Most outcome studies are individual surgeon case series from single centers where the results and outcomes are evaluated by the same surgeon. One method of increasing the external validity of a follow-up study is to have a multi-centre study design with independent assessment of the outcomes. We present an independent assessment of eleven year follow-up of hip resurfacing outcomes from an international hip resurfacing register. The purpose of this study was to assess: Implant survival at maximum follow-up for revision due to any reason, implant survival at maximum follow-up for revision due to major causes of failure, hip function following hip resurfacing and factors affecting hip function, effect of gender and age on hip function and implant survival, effect of femoral component size on hip function and implant survival. 4535 patients (5000 hips) entered into the registry during 1997-2002 were studied. In summary, at a maximum follow-up of 11 years hip resurfacing has a good implant survival of 96.2% and excellent post-operative function. This is excellent given the international and multisurgeon nature of this cohort where majority of the surgeons were in their learning curve.

Hip resurfacing for rheumatoid arthritis: independent assessment of 11-year results from an international register.

Total hip replacement has shown good outcomes for patients with rheumatoid arthritis. Can hip resurfacing give similar results for patients with rheumatoid arthritis? Using an international hip resurfacing register, 47 patients with rheumatoid arthritis were identified and age and gender matched to a group of 131 randomly selected patients with osteoarthritis of the hip joint. Patients completed a questionnaire to record function and implant revision. Hierarchical regression, Cox regression and Kaplan-Meier method were used for analysis. There was a significant increase in post operative hip score in both groups (p < 0.001) with rheumatoid group scoring higher as compared to the osteoarthritis group (p = 0.23). The post operative score was not significantly influenced by pre-operative score and age (p = 0.15 and 0.84, respectively) but the pre-operative score was a predictor of implant failure (p = 0.02). Patient mobility was affected by age with younger patients scoring high on mobility as compared to older patients (p = 0.01). The Kaplan-Meier analysis showed a survival rate of 96.3% in the rheumatoid group and 97.8% in the osteoarthritis group. This difference was not significant (Log rank test, p = 0.45). Our results from an independent and international register show that hip resurfacing provides good post-operative hip function and excellent implant survival for patients with rheumatoid arthritis of the hip joint. This procedure can be considered as a viable option for management of rheumatoid arthritis of the hip joint.

Age at follow-up and mechanical axis are good predictors of function after unicompartmental knee arthroplasty. An analysis of patients over 17 years follow-up.

Alteration of knee alignment after unicompartmental knee arthroplasty (UKA) influences wear of the prosthesis and progression of arthrosis. Recent reports have questioned the traditional view that under-correction of the deformity is advisable in UKA. The aim of this study was to analyse whether the location of the mechanical axis at the knee influences the function of the knee after UKA. We analysed the data from 40 patients (54 knees) who underwent UKA over 17 years. The Bristol knee score was maximal when the mechanical axis passed through zones 0 (area of tibial spines) or 1 (inner half of medial or lateral plateau). The average Bristol knee score of those patients was 18% higher than in patients in whom the mechanical axis passed through the other zones (p < 0.01, t-test). Using multiple regression analysis to correct for the effect of age on score, a significant relationship was found between the location of mechanical axis and function (p < 0.001). Based on these findings, surgeons should attempt to restore the mechanical axis to the centre of the knee during UKA, to help achieve better function.

Current in vivo wear of metal-on-metal bearings assessed by exercise-related rise in plasma cobalt level.

Baseline metal ion levels are elevated in patients with metal-on-metal (MOM) hip arthroplasty. Interpretation of baseline levels is difficult as measurements are influenced by wear, corrosion, and metal ion release from stored metal in the body. Schmalzried et al. demonstrated that "wear is the function of use, not time." The specific research question we asked was: Does physiological exercise increase the wear of metal-on-metal articulation which can be measured from the plasma metal ion levels? Patients with three different well functioning MOM bearings [two types of resurfacing (BHR 46.8 mm and Cormet 48 mm) and Metasul 28 mm] were included. Blood samples were taken immediately before, immediately after, and 1 h after exercise to determine cobalt and chromium levels. A significant increase (p<0.005) in serum cobalt and chromium of 13% and 11%, respectively, was noticed after the exercise. Rise of cobalt levels in patients with a resurfacing MOM was 8.5 times (BHR group) or 6.5 times (Cormet group) larger than in those with a Metasul MOM (p=0.021 and p=0.047). Neither rise of metal levels nor baseline levels correlated with any other factor (p>0.27). Exercise-related elevations of plasma cobalt level provides information on current in vivo wear production that cannot be inferred from a baseline measurement of cobalt levels. Chromium levels cannot provide reliable information on the in vivo wear of the devices. Diameter was the important feature of the implant in determining exercise-related elevations of plasma cobalt level. Exercise-related elevations of plasma cobalt level is a potential in vivo tool to understand and improve the tribology of metal-metal bearings.

Predicting in vivo clinical performance of anterior cruciate ligament fixation methods from in vitro analysis: industrial tests of fatigue life and tolerance limits are more useful than other cyclic loading parameters.

BACKGROUND: Anterior cruciate ligament graft fixations experience cyclic loads in vivo. Present cyclic loading studies testing fixation use "incremental cycling," "residual strength" protocols, or a combination. Industrial standards, however, rely on fatigue life testing and use tolerance limits to determine guaranteed minimum levels of cycles to failure. HYPOTHESIS: Industrial standards of fatigue life and lower tolerance limits provide a more conservative assessment of cycles to failure than do currently used cyclic loading models, and they facilitate interpretation of data toward clinical performance. STUDY DESIGN: Descriptive laboratory study. METHODS: Fatigue life curves and lower tolerance limits were calculated for porcine patellar tendon graft fixations that were tested to failure in single pulls or cycled to failure at 2 different load levels. A log curve was constructed so that the expected values at other load levels could be calculated. Comparison of a metal and a composite resorbable interference screw design was used as an example. RESULTS: Cycles to failure of both screw designs varied widely at each load level. The guaranteed minimum number of cycles calculated by tolerance limits was therefore much lower than the mean cycles to failure at any given load level. For example, at a load of 250 N, the predicted mean life for the composite screw and the metal screw was 2513 and 1490 cycles, respectively, whereas the 80/80 tolerance limits (the value that 80% could be expected to achieve with 80% confidence) were only 63 and 68 cycles, respectively. Small reductions in load level gave very large increases in minimally expected life. CONCLUSIONS: Fatigue testing of anterior cruciate ligament reconstructions better shows the wide variation between specimens and the large effect of load levels on expected life. Wide scatter makes mean levels over-optimistic and difficult to interpret. Tolerance limits give estimates that are more conservative and facilitate data interpretation. CLINICAL RELEVANCE: A method for testing and analyzing fatigue properties was presented, results of which are more readily interpreted to clinical practice.