Comparison of movement rate with different initial moment-to-force ratios.

INTRODUCTION: The objective of this clinical prospective study was to evaluate the effect of the 2 treatment strategies, translation or controlled tipping, followed by root correction on canine retraction efficiency, specifically canine movement rate. METHODS: Twenty-one patients who needed bilateral maxillary canine retraction to close extraction space as part of their treatment plan were selected for this study. Segmental T-loops designed for controlled tipping or for translation were applied randomly to each side. Two digital maxillary dental casts (taken before and after treatment) were used to measure the tooth displacements of each patient. The coordinate system located at the center of canine crown on the pretreatment model with the 3 axes defined in the mesial-distal (M-D), buccal-lingual, and occlusal-gingival directions was used to express the 6 tooth displacement components. The movement rates on the occlusal plane and in the M-D direction were computed. Movement rates were calculated by dividing the M-D displacements or the resultant displacement on the occlusal plane with the corresponding treatment time. RESULTS: T-Loops for controlled tipping moved canines faster (33.3% on occlusal plane and 38.5% in the M-D direction) than T-loops for translation. The differences were statistically significant (P = 0.041 on the occlusal plane and 0.020 in the M-D direction). CONCLUSIONS: Moment-to-force ratio (M/F) affects the canine movement rate in a maxillary canine retraction treatment with the use of a segmented T-loop mechanism. Within the neighborhood of the ratio for translation, lower M/F moves the canine faster than higher M/F both on the occlusal plane and in the M-D direction.

Hounsfield unit change in root and alveolar bone during canine retraction.

INTRODUCTION: The objective of this study was to determine the Hounsfield unit (HU) changes in the alveolar bone and root surfaces during controlled canine retractions. METHODS: Eighteen maxillary canine retraction patients were selected for this split-mouth design clinical trial. The canines in each patient were randomly assigned to receive either translation or controlled tipping treatment. Pretreatment and posttreatment cone-beam computed tomography scans of each patient were used to determine tooth movement direction and HU changes. The alveolar bone and root surface were divided into 108 divisions, respectively. The HUs in each division were measured. Mixed-model analysis of variance was applied to test the HU change distribution at the P <0.05 significance level. RESULTS: The HU changes varied with the directions relative to the canine movement. The HU reductions occurred at the root surfaces. Larger reductions occurred in the divisions that were perpendicular to the moving direction. However, HUs decreased in the alveolar bone in the moving direction. The highest HU reduction was at the coronal level. CONCLUSIONS: HU reduction occurs on the root surface in the direction perpendicular to tooth movement and in the alveolar bone in the direction of tooth movement when a canine is retracted.

Airway Obstruction and the Unilateral Cleft Lip and Palate Deformity: Contributions by the Bony Septum.

BACKGROUND: Patients with unilateral cleft lip and palate (CLP) deformities commonly develop nasal airway obstruction, necessitating septoplasty at the time of definitive rhinoplasty. We assessed the contribution of the bony septum to airway obstruction using computed tomography (CT) and cone beam CT (CBCT). METHODS: A 2-year retrospective review of all subjects with unilateral CLP who underwent CBCT imaging (n = 22) and age-matched controls (n = 9) who underwent CT imaging was conducted. Control CT scans were used to determine the segment of nasal septum comprised almost entirely of bone. The CBCT of the nasal airway was assessed using Dolphin software to determine the contribution of the bony septum to septal deviation and airway obstruction. RESULTS: The nasal septum posterior to the midpoint between anterior and posterior nasal spine is comprised of 96% bone. The nasal airway associated with this posterior bony segment was 43.1% (P < 0.001) larger by volume on the non-cleft side in patients with unilateral CLP. The average septal deviation within the posterior bony segment was 5.4 mm, accounting for 74.4% of the maximal deviation within the nasal airway. The average airway stenosis within the posterior bony nasal airway was 0.45 mm (0-2.2 mm). CONCLUSIONS: In patients with unilateral CLP, the bony nasal septum can demonstrate significant deviation and airway stenosis. Surgeons should consider a bony septoplasty in their treatment algorithm in unilateral CLP patients who have reached skeletal maturity.

Orthodontic soft-tissue parameters: a comparison of cone-beam computed tomography and the 3dMD imaging system.

INTRODUCTION: Orthodontists rely heavily on soft-tissue analysis to determine facial esthetics and treatment stability. The aim of this retrospective study was to determine the equivalence of soft-tissue measurements between the 3dMD imaging system (3dMD, Atlanta, Ga) and the segmented skin surface images derived from cone-beam computed tomography. METHODS: Seventy preexisting 3dMD facial photographs and cone-beam computed tomography scans taken within minutes of each other for the same subjects were registered in 3 dimensions and superimposed using Vultus (3dMD) software. After reliability studies, 28 soft-tissue measurements were recorded with both imaging modalities and compared to analyze their equivalence. Intraclass correlation coefficients and Bland-Altman plots were used to assess interexaminer and intraexaminer repeatability and agreement. Summary statistics were calculated for all measurements. To demonstrate equivalence of the 2 methods, the difference needed a 95% confidence interval contained entirely within the equivalence limits defined by the repeatability results. RESULTS: Statistically significant differences were reported for the vermilion height, mouth width, total facial width, mouth symmetry, soft-tissue lip thickness, and eye symmetry. CONCLUSIONS: There are areas of nonequivalence between the 2 imaging methods; however, the differences are clinically acceptable from the orthodontic point of view.

The effects of application time of a self-etching primer and debonding methods on bracket bond strength.

OBJECTIVE: To test the manufacturer's recommendation for the application rubbing time of a self-etching primer (Transbond Plus, 3M Unitek) and to compare the resulting bond strength of a resin composite (Transbond XT, 3M Unitek) in the traditional laboratory tension on all four wings with a simulation of the clinical single-wing lift-off debonding instrument (LODI; 3M Unitek). MATERIALS AND METHODS: Flattened stainless-steel maxillary incisor orthodontic brackets (Victory Series, 3M Unitek) were bonded to 108 flattened bovine incisors. The enamel was rubbed with the self-etching primer for 0, 5 (the manufacturer's recommendation), and 10 seconds during a 10-second application. Traditional four-wing and LODI simulated debonding forces and the adhesive remnant index (ARI) were recorded. RESULTS: One-way analysis of variance testing among rubbing times and debonding methods indicated a significant difference in strength with 0 and 5 seconds of rubbing and between traditional and LODI simulated tension. The bond strengths were higher in the ARI  =  1 subset compared to the ARI  =  3-5 subsets. CONCLUSIONS: The manufacturer's recommendation for primer rubbing time produced the highest bond strength. Less force is required for debonding when tension is applied to one wing (LODI simulation) vs on all four wings.

The relationship between the ABO discrepancy index and treatment duration in a graduate orthodontic clinic.

OBJECTIVE: To test the hypothesis that there is no relationship between the components of the American Board of Orthodontics (ABO) discrepancy index (DI) and duration of orthodontic treatment. MATERIALS AND METHODS: A retrospective review of 732 patient records with permanent dentition was performed. Pretreatment radiographs and casts were used to determine the DI score. Other data collected were total treatment duration, age, sex, ethnicity, and the date fixed appliances were removed. Reliability tests showed substantial agreement between examiners (Cohen's kappa 0.68-0.94). Pearson and Spearman correlation coefficients were used to assess the association between the DI scores and length of treatment. A multiple variable regression analysis was used to determine which variables predict treatment duration (P < .05 significant). RESULTS: There was a significant association between the DI and treatment duration. There was a significant multivariate association for DI components (occlusions, crowding, overjet, cephalometrics, overbite, lateral open bite, and tooth transposition) and treatment duration. CONCLUSIONS: The hypothesis was rejected. This retrospective study of university clinical records showed that the average increase in treatment duration was about 11 days for each point increase in total DI score. Treatment duration was differentially increased by various components of the DI: approximately 6.5 months for tooth transposition; approximately 1 month for crowding, overjet, or overbite; approximately 3 weeks for occlusion discrepancies; approximately 2 weeks for lateral open bite; and approximately 5 days for cephalometric discrepancies.

Risk factors for incidence and severity of white spot lesions during treatment with fixed orthodontic appliances.

INTRODUCTION: The development of incipient caries, or white spot lesions (WSLs), is a significant clinical problem in orthodontics. The purpose of this study was to retrospectively determine the incidence and severity of WSLs by examining pretreatment and posttreatment digital photographs. METHODS: A total of 332 consecutive finished patients from a university graduate orthodontic clinic were evaluated. Initial and final digital images were compared to assess WSLs. The facial surfaces of the anterior 8 maxillary teeth were analyzed. The percentage area of WSL per total facial tooth surface was calculated to control for magnification differences. Reliability of the method was assessed by comparison with direct clinical examination data. Patient and operator factors, and treatment complexity and outcomes were evaluated as predictors of WSL incidence and severity. RESULTS: Agreement between direct clinical examination and digital photo data was excellent, with an intraclass correlation coefficient 0.88 and a 0.3% average difference between methods. The incidence of at least 1 WSL on the labial surface of the anterior 8 maxillary teeth was 36%. The order of incidence was lateral incisor (34%), canine (31%), premolar (28%), and central incisor (17%). CONCLUSIONS: Risk factors for the development of incipient caries during orthodontic treatment were young age (preadolescent) at the start of treatment, number of poor hygiene citations during treatment, unfavorable clinical outcome score, white ethnic group, and inadequate oral hygiene at the initial pretreatment examination. The use of computer software to evaluate digital photos retrospectively is a valid method for assessing the incidence and severity of WSLs on the maxillary anterior incisors, canines, and premolars.

Clinical outcomes of 0.018-inch and 0.022-inch bracket slot using the ABO objective grading system.

OBJECTIVE: To determine if there is a significant difference in the clinical outcomes of cases treated with 0.018-inch brackets vs 0.022-inch brackets according to the American Board of Orthodontics (ABO) Objective Grading System (OGS). MATERIALS AND METHODS: Treatment time and the ABO-OGS standards in alignment/rotations, marginal ridges, buccolingual inclination, overjet, occlusal relationships, occlusal contacts, interproximal contacts, and root angulations were used to compare clinical outcomes between a series of 828 consecutively completed orthodontic cases (2005-2008) treated in a university graduate orthodontic clinic with 0.018-inch- and 0.022-inch-slot brackets. RESULTS: A two-sample t-test showed a significantly shorter treatment time and lower ABO-OGS score in four categories (alignment/rotations, marginal ridges, overjet, and root angulations), as well as lower total ABO-OGS total score, with the 0.018-inch brackets. The ANCOVA-adjusting for covariants of discrepancy index, age, gender, and treatment time-showed that the 0.018-inch brackets scored significantly lower than the 0.022-inch brackets in both the alignment/rotations category and total ABO-OGS score. CONCLUSIONS: There were statistically, but not clinically, significant differences in treatment times and in total ABO-OGS scores in favor of 0.018-inch brackets as compared with the 0.022-inch brackets in a university graduate orthodontic clinic (2005-2008).

Status of lingual orthodontics.

The lingual appliance was developed simultaneously in 2 countries during the 1970s. Although not fully recognized by the orthodontic mainstream, lingual treatment has steadily expanded, with increased numbers of lingual orthodontists and patients. This article reviews the development, advantages and disadvantages, bonding techniques, biomechanics, and treatment procedures of the lingual appliance. Currently, there are few contraindications for treatment with the lingual appliance. Cephalometric measurements do not reveal statistically significant differences in treatment results between labial and lingual treatment; however, more clinical trial studies are needed to compare the efficiency and outcome of lingual appliances with those of labial appliances.

Effect of fluoride prophylactic agents on the mechanical properties of nickel-titanium-based orthodontic wires.

BACKGROUND: Titanium-based alloys have high corrosion resistance because they form a thin, stable oxide layer. Nevertheless, fluoride prophylactic agents can cause corrosion and associated discoloration of titanium-based orthodontic wires. The purpose of this investigation was to study the effects of fluoride prophylactic agents on the mechanical properties of nickel-titanium (Ni-Ti) and copper-nickel-titanium (Cu-Ni-Ti) orthodontic archwires. METHODS: Preformed rectangular Ni-Ti and Cu-Ni-Ti wires were immersed in either an acidulated fluoride agent, a neutral fluoride agent, or distilled water (control) for 1.5 hours at 37 degrees C. After immersion, the loading and unloading elastic modulus and yield strength of the wires were measured with a 3-point bend test in a water bath at 37 degrees C, in accordance with the criteria in the current American National Standard/American Dental Association Specification No. 32 for Orthodontic Wires (2000). Scanning electron microscopy was also used to characterize the effects of the fluoride treatment on the wire topography. RESULTS: Unloading mechanical properties of Ni-Ti orthodontic wires were significantly decreased after exposure to both fluoride agents (1-way analysis of variance [ANOVA] and Dunnett's post hoc, alpha =.05); however, Cu-Ni-Ti wire mechanical properties were not significantly affected by either fluoride agent (1-way ANOVA, alpha =.05). Corrosive changes in surface topography were observed for both wires, with Cu-Ni-Ti appearing to be more severely affected. CONCLUSIONS: The results suggest that using topical fluoride agents with Ni-Ti wire could decrease the functional unloading mechanical properties of the wire and contribute to prolonged orthodontic treatment.