In vitro evaluation of decellularized ECM-derived surgical scaffold biomaterials.

Decellularized extracellular matrix (ECM) biomaterials are increasingly used in regenerative medicine for abdominal tissue repair. Emerging ECM biomaterials with greater compliance target surgical procedures like breast and craniofacial reconstruction to enhance aesthetic outcome. Clinical studies report improved outcomes with newly designed ECM scaffolds, but their comparative biological characteristics have received less attention. In this study, we investigated scaffolds derived from dermis (AlloDerm Regenerative Tissue Matrix), small intestinal submucosa (Surgisis 4-layer Tissue Graft and OASIS Wound Matrix), and mesothelium (Meso BioMatrix Surgical Mesh and Veritas Collagen Matrix) and evaluated biological properties that modulate cellular responses and recruitment. An assay panel was utilized to assess the ECM scaffold effects upon cells. Results of the material-conditioned media study demonstrated Meso BioMatrix and OASIS best supported cell proliferation. Meso BioMatrix promoted the greatest migration and chemotaxis signaling, followed by Veritas and OASIS; OASIS had superior suppression of cell apoptosis. The direct adhesion assay indicated that AlloDerm, Meso BioMatrix, Surgisis, and Veritas had sidedness that affected cell-material interactions. In the chick chorioallantoic membrane assay, Meso BioMatrix and OASIS best supported cell infiltration. Among tested materials, Meso BioMatrix and OASIS demonstrated characteristics that facilitate scaffold incorporation, making them promising choices for many clinical applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 585-593, 2017.

A bilayer small diameter in vitro vascular model for evaluation of drug induced vascular injury.

In pre-clinical safety studies, drug-induced vascular injury (DIVI) is defined as an adverse response to a drug characterized by degenerative and hyperplastic changes of endothelial cells and vascular smooth muscle cells. Inflammation may also be seen, along with extravasation of red blood cells into the smooth muscle layer (i.e., hemorrhage). Drugs that cause DIVI are often discontinued from development after considerable cost has occurred. An in vitro vascular model has been developed using endothelial and smooth muscle cells in co-culture across a porous membrane mimicking the internal elastic lamina. Arterial flow rates of perfusion media within the endothelial chamber of the model induce physiologic endothelial cell alignment. Pilot testing with a drug known to cause DIVI induced extravasation of red blood cells into the smooth muscle layer in all devices with no extravasation seen in control devices. This engineered vascular model offers the potential to evaluate candidate drugs for DIVI early in the discovery process. The physiologic flow within the co-culture model also makes it candidate for a wide variety of vascular biology investigations.

Conditions for seeding and promoting neo-auricular cartilage formation in a fibrous collagen scaffold.

BACKGROUND: Carved autologous costal cartilage and porous polyethylene implants (Medpor) are the most common approaches for total ear reconstruction, but these approaches may have inconsistent cosmetic outcomes, a high risk of extrusion, or other surgical complications. Engineering ear cartilage to emulate native auricular tissue is an appealing approach, but often the cell-seeded scaffolds are susceptible to shrinkage and architectural changes when placed in vivo. The aim of this study was to assess the most favorable conditions for in vitro pre-culture of cell-seeded type I collagen scaffolds prior to in vivo implantation. METHODS: Sheep auricular chondrocytes were seeded into this type I collagen scaffold. The cell-seeded constructs were cultured in either static or dynamic conditions for two days or two weeks and then implanted into nude mice for another six weeks. The harvested constructs were evaluated histologically, immunohistochemically, and biochemically. RESULTS: Robust neo-cartilage formation was found in these collagen scaffolds seeded with auricular chondrocytes, which was comparable to native cartilage morphologically, histologically, and biochemically. Culture under dynamic conditions prior to implantation improved the neo-cartilage formation histologically and biochemically. CONCLUSION: Dynamic culture of this cell-seeded fibrous collagen material could permit predictable engineered auricular cartilage and a promising approach for external ear reconstruction.

Liver cell therapy and tissue engineering for transplantation.

Liver transplantation remains the only definitive treatment for liver failure and is available to only a tiny fraction of patients with end-stage liver diseases. Major limitations for the procedure include donor organ shortage, high cost, high level of required expertise, and long-term consequences of immune suppression. Alternative cell-based liver therapies could potentially greatly expand the number of patients provided with effective treatment. Investigative research into augmenting or replacing liver function extends into three general strategies. Bioartificial livers (BALs) are extracorporeal devices that utilize cartridges of primary hepatocytes or cell lines to process patient plasma. Injection of liver cell suspensions aims to foster organ regeneration or provide a missing metabolic function arising from a genetic defect. Tissue engineering recreates the organ in vitro for subsequent implantation to augment or replace patient liver function. Translational models and clinical trials have highlighted both the immense challenges involved and some striking examples of success.

Ovine model for auricular reconstruction: porous polyethylene implants.

OBJECTIVES: We developed a large animal model for auricular reconstruction with engineered cartilage frameworks and evaluated the performance of porous polyethylene auricular implants in this model. METHODS: Eighteen high-density porous polyethylene auricular frameworks were implanted subcutaneously in the infra-auricular areas of 9 sheep. The implants were harvested 17 weeks later for gross and histologic examination. The perioperative and postoperative courses were carefully documented. RESULTS: Five implants became exposed, and 2 implants needed to be removed at 7 weeks. Additionally, 1 infected implant was removed at 2 weeks. Seromas developed in 2 implants because of drain failures and were drained successfully during the first postoperative week. There were no other surgical site complications. The remaining 10 implants had an acceptable cosmetic appearance at 17 weeks. CONCLUSIONS: The perioperative complication rate in the ovine porous polyethylene auricular implant model was higher than that reported for auricular reconstructions in humans. The implant exposures were likely caused by ischemia and excessive stress on the thin overlying skin, because vascularized flap coverage was not used. The histologic findings were comparable to the results reported for other animal models. This large animal model is appropriate for auricular reconstruction experiments, including engineered constructs.

Successful creation of tissue-engineered autologous auricular cartilage in an immunocompetent large animal model.

Tissue-engineered cartilage has historically been an attractive alternative treatment option for auricular reconstruction. However, the ability to reliably generate autologous auricular neocartilage in an immunocompetent preclinical model should first be established. The objectives of this study were to demonstrate engineered autologous auricular cartilage in the immunologically aggressive subcutaneous environment of an immunocompetent animal model, and to determine the impact of in vitro culture duration of chondrocyte-seeded constructs on the quality of neocartilage maturation in vivo. Auricular cartilage was harvested from eight adult sheep; chondrocytes were isolated, expanded in vitro, and seeded onto fibrous collagen scaffolds. Constructs were cultured in vitro for 2, 6, and 12 weeks, and then implanted autologously in sheep and in control nude mice for 6 and 12 weeks. Explanted tissue was stained with hematoxylin and eosin, safranin O, toluidine blue, collagen type II, and elastin. DNA and glycosaminoglycans (GAGs) were quantified. The quality of cartilage engineered in sheep decreased with prolonged in vitro culture time. Superior cartilage formation was demonstrated after 2 weeks of in vitro culture; the neocartilage quality improved with increased implantation time. In nude mice, neocartilage resembled native sheep auricular cartilage regardless of the in vitro culture length, with the exception of elastin expression. The DNA quantification was similar in all engineered and native cartilage (p>0.1). All cartilage engineered in sheep had significantly less GAG than native cartilage (p<0.02); significantly more GAG was observed with increased implantation time (p<0.02). In mice, the GAG content was similar to that of native cartilage and became significantly higher with increased in vitro or in vivo durations (p<0.02). Autologous auricular cartilage was successfully engineered in the subcutaneous environment of an ovine model using expanded chondrocytes seeded on a fibrous collagen scaffold after a 2-week in vitro culture period.

Biologic properties of surgical scaffold materials derived from dermal ECM.

Surgical scaffold materials manufactured from donor human or animal tissue are increasingly being used to promote soft tissue repair and regeneration. The clinical product consists of the residual extracellular matrix remaining after a rigorous decellularization process. Optimally, the material provides both structural support during the repair period and cell guidance cues for effective incorporation into the regenerating tissue. Surgical scaffold materials are available from several companies and are unique products manufactured by proprietary methodology. A significant need exists for a more thorough understanding of scaffold properties that impact the early steps of host cell recruitment and infiltration. In this study, a panel of in vitro assays was used to make direct comparisons of several similar, commercially-available materials: Alloderm, Medeor Matrix, Permacol, and Strattice. Differences in the materials were detected for both cell signaling and scaffold architecture-dependent cell invasion. Material-conditioned media studies found Medeor Matrix to have the greatest positive effect upon cell proliferation and induction of migration. Strattice provided the greatest chemotaxis signaling and best suppressed apoptotic induction. Among assays measuring structure-dependent properties, Medeor Matrix was superior for cell attachment, followed by Permacol. Only Alloderm and Medeor Matrix supported chemotaxis-driven cell invasion beyond the most superficial zone. Medeor Matrix was the only material in the chorioallantoic membrane assay to support substantial cell invasion. These results indicate that both biologic and structural properties need to be carefully assessed in the considerable ongoing efforts to develop new uses and products in this important class of biomaterials.

A nanofiber membrane maintains the quiescent phenotype of hepatic stellate cells.

BACKGROUND: Hepatic stellate cells (HSC) play a major role in the progression of liver fibrosis. AIM: The aim of our study was to investigate whether rat HSC cultured on a nanofiber membrane (NM) retain their quiescent phenotype during both short- and long-term culture and whether activated HSC revert to a quiescent form when re-cultured on NM. METHODS: Rat HSC cultured for 1 day on plastic plates (PP) were used as quiescent HSC, while cells cultured for 1 week on PP were considered to be activated HSC. Quiescent or activated HSC were subsequently plated on PP or NM and cultured for an additional 4 days at which time their gene expression, stress fiber development, and growth factor production were determined. For long-term culture, HSC were grown on NM for 20 days and the cells then replated on PP and cultured for another 10 days. RESULTS: Expression of marker genes for HSC activation, stress fiber development, and growth factor production were significantly lower in both quiescent and activated HSC cultured on NM than in those cultured on PP. After long-term culture on NM, activation marker gene expression and stress fiber development were still significantly lower in HSC than in PP, and HSC still retained the ability to activate when replated onto PP. CONCLUSIONS: HSC cultured on NM retained quiescent characteristics after both short- and long-term culture while activated HSC reverted toward a quiescent state when cultured on NM. Cultures of HSC grown on NM are a useful in vitro model to investigate the mechanisms of activation and deactivation.

Engineering ear constructs with a composite scaffold to maintain dimensions.

Engineered cartilage composed of a patient's own cells can become a feasible option for auricular reconstruction. However, distortion and shrinkage of ear-shaped constructs during scaffold degradation and neocartilage maturation in vivo have hindered the field. Scaffolds made of synthetic polymers often generate degradation products that cause an inflammatory reaction and negatively affect neocartilage formation in vivo. Porous collagen, a natural material, is a promising candidate; however, it cannot withstand the contractile forces exerted by skin and surrounding tissue during normal wound healing. We hypothesised that a permanent support in the form of a coiled wire embedded into a porous collagen scaffold will maintain the construct's size and ear-specific shape. Half-sized human adult ear-shaped fibrous collagen scaffolds with and without embedded coiled titanium wire were seeded with sheep auricular chondrocytes, cultured in vitro for up to 2 weeks, and implanted subcutaneously on the backs of nude mice. After 6 weeks, the dimensional changes in all implants with wire support were minimal (2.0% in length and 4.1% in width), whereas significant reduction in size occurred in the constructs without embedded wire (14.4% in length and 16.5% in width). No gross distortion occurred over the in vivo study period. There were no adverse effects on neocartilage formation from the embedded wire. Histologically, mature neocartilage extracellular matrix was observed throughout all implants. The amount of DNA, glycosaminoglycan, and hydroxyproline in the engineered cartilage were similar to that of native sheep ear cartilage. The embedded wire support was essential for avoiding shrinkage of the ear-shaped porous collagen constructs.

Liver-assist device with a microfluidics-based vascular bed in an animal model.

OBJECTIVE: This study evaluates a novel liver-assist device platform with a microfluidics-modeled vascular network in a femoral arteriovenous shunt in rats. SUMMARY OF BACKGROUND DATA: Liver-assist devices in clinical trials that use pumps to force separated plasma through packed beds of parenchymal cells exhibited significant necrosis with a negative impact on function. METHODS: Microelectromechanical systems technology was used to design and fabricate a liver-assist device with a vascular network that supports a hepatic parenchymal compartment through a nanoporous membrane. Sixteen devices with rat primary hepatocytes and 12 with human HepG2/C3A cells were tested in athymic rats in a femoral arteriovenous shunt model. Several parenchymal tube configurations were evaluated for pressure profile and cell survival. The blood flow pattern and perfusion status of the devices was examined by laser Doppler scanning. Cell viability and serum protein secretion functions were assessed. RESULTS: Femoral arteriovenous shunt was successfully established in all animals. Blood flow was homogeneous through the vascular bed and replicated native flow patterns. Survival of seeded liver cells was highly dependent on parenchymal chamber pressures. The tube configuration that generated the lowest pressure supported excellent cell survival and function. CONCLUSIONS: This device is the first to incorporate a microfluidics network in the systemic circulatory system. The microvascular network supported viability and function of liver cells in a short-term ex vivo model. Parenchymal chamber pressure generated in an arteriovenous shunt model is a critical parameter that affects viability and must be considered in future designs. The microfluidics-based vascular network is a promising platform for generating a large-scale medical device capable of augmenting liver function in a clinical setting.

Nanofabricated collagen-inspired synthetic elastomers for primary rat hepatocyte culture.

Synthetic substrates that mimic the properties of extracellular matrix proteins hold significant promise for use in systems designed for tissue engineering applications. In this report, we designed a synthetic polymeric substrate that is intended to mimic chemical, mechanical, and topological characteristics of collagen. We found that elastomeric poly(ester amide) substrates modified with replica-molded nanotopographic features enhanced initial attachment, spreading, and adhesion of primary rat hepatocytes. Further, hepatocytes cultured on nanotopographic substrates also demonstrated reduced albumin secretion and urea synthesis, which is indicative of strongly adherent hepatocytes. These results suggest that these engineered substrates can function as synthetic collagen analogs for in vitro cell culture.

In vitro analysis of a hepatic device with intrinsic microvascular-based channels.

A novel microfluidics-based bilayer device with a discrete parenchymal chamber modeled upon hepatic organ architecture is described. The microfluidics network was designed using computational models to provide appropriate flow behavior based on physiological data from human microvasculature. Patterned silicon wafer molds were used to generate films with the vascular-based microfluidics network design and parenchymal chamber by soft lithography. The assembled device harbors hepatocytes behind a nanoporous membrane that permits transport of metabolites and small proteins while protecting them from the effects of shear stress. The device can sustain both human hepatoma cells and primary rat hepatocytes by continuous in vitro perfusion of medium, allowing proliferation and maintaining hepatic functions such as serum protein synthesis and metabolism. The design and fabrication processes are scalable, enabling the device concept to serve as both a platform technology for drug discovery and toxicity, and for the continuing development of an improved liver-assist device.

Hepatic tissue engineering.

Fulminant hepatic failure (FHF) attributes to rising medical cost and accounts for many deaths each year in the United States. Currently, the only solution is organ transplantation. Due to increasing donor organ shortage, many in need of transplantation continue to remain on the waiting list. Liver Assist Devices (LADs) are being used to temporarily sustain liver function and bridge the period between FHF and transplantation. Hepatic Tissue Engineering is a step toward alleviating the need for donor organs; yet many challenges must be overcome including scaffold choice, cell source and immunological barriers. Bioreactors have aided in hepatocyte survival and have proven to sustain viable cells for several weeks. Achieving the necessary functions required for hepatic replacement is aided by the incorporation of growth factors and mitogens many that now can be bound to the polymer scaffold and released in a timely manner. Utilizing concepts such as MicroElectroMechanical systems (MEMs) technology, our laboratory is able to mimic the natural vasculature of the liver and sustain functional and viable hepatocytes. Expanding and improving upon this platform technology, advancements made will continue toward the development of a fully functioning and implantable liver.