Effect of Microstructure on Contact Angle and Corrosion of Ductile Iron: Iron-Graphite Composite.

Ductile iron samples with similar compositions and varying microstructures were uniformly abraded, and the effects of phase fractions (ferrite, pearlite, and graphite) on the apparent contact angle (with water) and corrosion characteristics of ductile iron were investigated. We also investigated the effect of droplet volume on the apparent contact angle of ductile iron. Irrespective of the droplet size, the ductile iron system followed the Wenzel model of wetting, and the contact angle increased with increasing droplet volume. The Wenzel and Cassie-Baxter contact angles were calculated, and the calculated results agreed well with the experimental results. It was experimentally proven that pearlite is more susceptible to corrosion than ferrite and graphite, and a higher portion of pearlite in the microstructure can be detrimental to the corrosion resistance of the material. Understanding the relationship between the microstructure, contact angle, and corrosion can be used to develop materials with higher contact angle and corrosion-resistant microstructures. Using metal pipes that have high contact angles is desirable because artificial coatings on metal pipes can degrade over time leading to high cost of replacement and contamination to water systems.

Relationship between women's occupational work and bone health: a study from India.

Physical activity is known to influence the bone mass of an individual. Few studies have examined the effect of occupational activities on bone health. The present study investigated the relationship between occupational activities and the bone parameters measured by dual-energy X-ray absorptiometry in 158 women from a low-income group in India. Women involved in three occupations with different bone-loading patterns (beedi (cigarette) makers, sweepers and construction workers) were included in the study. Anthropometric parameters, parity and percentage of menopausal women did not differ significantly between the three groups and dietary intake of Ca was low in all the groups. Bone mineral density (BMD) values of the overall group at all the sites were much lower than those reported from developed countries, possibly due to different body sizes in these regions. Femoral neck and hip BMD were not different in the three groups in spite of marked differences in activity patterns. However, bone area in the femoral neck was higher in the beedi makers compared with sweepers probably due to the squatting position adopted by beedi makers. Lumbar spine BMD was significantly lower among the sweepers when compared with the beedi makers and the groups performing walking and weight-bearing activities (sweepers and construction workers) had a higher prevalence of osteoporosis in the lumbar spine. However, weight-bearing effects of the upper body due to a squatting position were associated with better lumbar spine BMD in the beedi makers. The present study thus indicates that undernutrition might affect the relationship between occupational activities and bone parameters.

Bone status of Indian women from a low-income group and its relationship to the nutritional status.

Indian women from low-income groups consume diets that have inadequate calcium coupled with too few calories, proteins and micronutrients. Hospital-based data suggest that these women have osteoporotic hip fractures at a much earlier age than Western women. Studies reporting bone parameters of the Indian population involving large sample sizes are not available. This study was therefore carried out with 289 women in the 30-60-year age group to estimate the prevalence of osteoporosis and measure the bone parameters by dual energy X-ray absorptiometry (DXA). Their mean (+/- SD) age was 41.0+/-8.60 years. Their mean (+/- SD) height, weight and body mass index (BMI) were 149.1+/-5.49 cm, 49.2+/-9.85 kg and 22.1+/-3.99, respectively. Dietary intake of calcium was estimated to be 270+/-57 mg/day. The prevalence of osteoporosis at the femoral neck was around 29%. Bone mineral density (BMD) and T scores at all the skeletal sites were much lower than the values reported from the developed countries and were indicative of a high prevalence of osteopenia and osteoporosis. BMD showed a decline after the age of 35 years in cases of the lumbar spine and femoral neck. This was largely due to a decrease of bone mineral content (BMC). The nutritional status of women appears to be an important determinant of bone parameters. BMD and BMC at all the skeletal sites and whole body increased significantly with increasing body weight and BMI of women (P<0.05). However, bone area (BA) did not change with an increase in BMI. In the multiple regression analysis, apart from body weight, age, menopause and calcium intake were the other important determinants of BMD (P<0.05). In addition to these, height was also an important determinant of WB-BMC. This study highlights the urgent need for measures to improve the nutritional status, dietary calcium intake and thus the bone health of this population.