Effects of sulfide on microbial fuel cells with platinum and nitrogen-doped carbon powder cathodes.

Because of the advantages of low cost, good electrical conductivity and high oxidation resistance, nitrogen-doped carbon (NDC) materials have a potential to replace noble metals in microbial fuel cells (MFCs) for wastewater treatment. In spite of a large volume of studies on NDC materials as catalysts for oxygen reduction reaction, the influence of sulfide on NDC materials has not yet been explicitly reported so far. In this communication, nitrogen-doped carbon powders (NDCP) were prepared by treating carbon powders in nitric acid under reflux condition. Sodium sulfide (Na(2)S) was added to the cathodic electrolyte to compare its effects on platinum (Pt) and NDCP cathodes. Cell voltages, power density and cathodic potentials were monitored without and with Na(2)S and after Na(2)S was removed. The maximum cell voltage of the MFCs with Pt cathode decreased by 10% in the presence of Na(2)S that did not change the performance of the MFC with NDCP cathode, and the maximum power density of the MFC with NDCP cathode was even 11.3% higher than that with Pt cathode (222.5 ± 8 mW m(-2) vs. 199.7 ± 4 mW m(-2)).

Application of nitrogen-doped carbon powders as low-cost and durable cathodic catalyst to air-cathode microbial fuel cells.

Given few in-depth studies available on the application of nitrogen-doped carbon powders (NDCP) to air-cathode microbial fuel cells (ACMFCs), a low-cost and durable catalyst of NDCP was prepared and used as cathodic catalyst of ACMFCs. Compared to the untreated carbon powders, the N-doped treatment significantly increased the maximum power density (MPD) of ACMFC. A two-step pretreatment of heat treatment and hydrochloric acid immersion can further obviously increase the MPD. With a reasonably large loading of catalyst, the MPD of NDCP based ACMFC was comparable to that of carbon-supported platinum (Pt/C) based ACMFC, while the cost was dramatically reduced. The pretreatment increased the key nitrogen functional groups, pyridinic-like and pyrrolic-like nitrogen. A third new key nitrogen functional group, nitrogen oxide, was discovered and the mechanism of its contribution was explained. Compared to the inherent deterioration problem of Pt/C, NDCP exhibited high stability and was superior for long-term operation of ACMFCs.