Abandonment of fibreglass reinforced plastic fishing boats in Kerala, India, and chemical emissions arising from their burning.

Little information exists on the fate and impacts of boats constructed of fibreglass reinforced plastic (FRP) once they reach their end-of-life. In this study, the number of abandoned fishing boats constructed of FRP or constructed of plywood-wood and sheathed by FRP has been determined along the coast of Kerala, India, and chemical emissions have been estimated when boats are burned as a means of disposal. A total of 292 abandoned boats were observed across eight coastal transects constructed around selected landing centres, with abandonment ranging from 13 to 48 per km (average = 29 km-1). This results in the generation of 1420 kg of FRP debris (glass mat and epoxy resin) per km of coastline. A controlled combustion experiment, simulating open burning, revealed that 63% of original boat mass is emitted to the atmosphere, with the remainder forming a burnt residue. Total concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans emitted and remaining were found to be 2.6 ng Nm-3 and 249.6 µg kg-1, respectively, with respective calculated toxicity equivalence (TEQ) levels of 437.6 pg TEQ Nm-3 in air emissions and 26.6 µg TEQ kg-1 in the residue. These figures are equivalent to the total emission from FRP boat burning of about 17,000 µg TEQ t-1. Burning also generates significant quantities of potentially toxic metals, with resulting concentrations of Co, Cr and Cu close to or exceeding soil guideline values. The study calls for a greater awareness of the impacts arising from boat abandonment and burning amongst fishermen, and guidelines or regulatory protocols regarding safe and sustainable boat disposal or recycling.

Occurrence and characteristics of fibreglass-reinforced plastics and microplastics on a beach impacted by abandoned fishing boats: A case study from Chellanam, India.

Plastics and microplastics have been quantified and characterised at disposal sites of abandoned fishing boats and along the high-water line (HWL) of a fish landing centre in Chellanam, India. Fibreglass-reinforced plastic (FRP) made a greater contribution to the plastic pool at the disposal sites (~ 4.5 n m-2 and 18 g m-2) than the HWL (~ 0.25 n m-2 and < 1 g m-2) and was an abundant component of the microplastic pool at the former. Infrared analysis of micro-sized FRPs revealed various resins (e.g., alkyd, polyester, epoxy), while X-ray fluorescence analysis of the painted surfaces of meso-sized FRPs returned variable concentrations of copper and lead. Concentrations of Pb were high enough to contaminate sand up to ~400 mg kg-1. The relatively high density of FRP and its association with glass fibres and metal-bearing paints results in particles with potentially very different fates and toxicities to more "conventional" (non-composite) thermoplastics.