Compositional analysis of copper and iron-based alloys using LIBS coupled with chemometric method.

The present manuscript deals with the utility of the calibration-free LIBS and calibration curve methods for the compositional study of different alloys using laser-induced breakdown spectroscopy (LIBS). In the process of alloying in the smelting industry, metal concentration in different alloys affects the physical and chemical properties of the final products. Therefore, LIBS can be used as an efficient quantitative analysis tool for online monitoring of the quality of the products. This is because LIBS can be performed online, in situ, without any pre-processing, and need no sample preparation for the compositional analysis of any type of materials present in any phase (solid, liquid, gas or even molten alloys in the industries). In the present study, four alloys (three copper and one iron-based alloy) consisting of Cu, Al, Zn, Ni, Fe, Cr and Mn as major and Sn and Si as minor elements were selected for the study using calibration-free laser-induced breakdown spectroscopy (CF-LIBS) and calibration curve method i.e. partial least square regression (PLSR). For the CF-LIBS method, the temporal delay has been optimized in order to satisfy the optically thin and local thermal equilibrium (LTE) condition of the plasma. For the PLSR method, different regions of the strongest emission lines of constituents have been selected for quantitative analysis. The study of time-resolved LIBS spectra and the variation of plasma parameters with respect to the delay time is also discussed. The utility of the combined technique of CF-LIBS with the PLSR method for rapid monitoring and quality assessment of desired material/products without any sample pretreatment, thus reducing the cost of the analysis, is presented in this paper.

Effect of mineral elements on the formation of gallbladder stones using spectroscopic techniques.

Long-standing gallbladder stones have been recognized as one of the highest risk factors for gallbladder cancer. However, the growth and progression of gallbladder stones are still not well-known, and their uncovering requires accurate information on the formation/nucleation and complex compositional information of gallstones. Multiple and single gallstones are analyzed using laser-induced breakdown spectroscopy (LIBS), photoacoustic spectroscopy (PAS), and Fourier transform infrared spectroscopy (FTIR). Spectral signatures as well as spatial variation in the spectral intensities of different elements are observed in the LIBS spectra of the gallstones. In the multiple-type gallstones, the concentration of inorganic content increases from core to periphery, whereas a single gallstone shows the opposite trend from the point of nucleation/core. It is suggested that the concentration of inorganic elements (Mg, Ca, K, and Na) plays an important role in the nucleation and growth of gallstones; thus, accordingly, multiple- and single-type gallstones are found in the gallbladder. The presence of different electronic bands of molecules, such as CH, C2, CN, and NH, is confirmed by LIBS and FTIR. PAS has identified molecules, such as cholesterol, calcium carbonate, and calcium phosphate, in different gallstone samples. These results show that PAS combined with LIBS is a promising candidate for the compositional analysis of gallstones. Furthermore, principal component analysis (PCA) is used to discriminate different layers present in the gallstones.

An Approach to Evaluate Pb Tolerance and Its Removal Mechanisms by Pleurotus opuntiae.

Widespread lead (Pb) contamination prompts various environmental problems and accounts for about 1% of the global disease burden. Thus, it has necessitated the demand for eco-friendly clean-up approaches. Fungi provide a novel and highly promising approach for the remediation of Pb-containing wastewater. The current study examined the mycoremediation capability of a white rot fungus, P. opuntiae, that showed effective tolerance to increasing concentrations of Pb up to 200 mg L-1, evidenced by the Tolerance Index (TI) of 0.76. In an aqueous medium, the highest removal rate (99.08%) was recorded at 200 mg L-1 whereas intracellular bioaccumulation also contributed to the uptake of Pb in significant amounts with a maximum of 24.59 mg g-1. SEM was performed to characterize the mycelium, suggesting changes in the surface morphology after exposure to high Pb concentrations. LIBS indicated a gradual change in the intensity of some elements after exposure to Pb stress. FTIR spectra displayed many functional groups including amides, sulfhydryl, carboxyl, and hydroxyl groups on the cell walls that led to binding sites for Pb and indicated the involvement of these groups in biosorption. XRD analysis unveiled a mechanism of biotransformation by forming a mineral complex as PbS from Pb ion. Further, Pb fostered the level of proline and MDA at a maximum relative to the control, and their concentration reached 1.07 µmol g-1 and 8.77 nmol g-1, respectively. High Pb concentration results in oxidative damage by increasing the production of ROS. Therefore, the antioxidant enzyme system provides a central role in the elimination of active oxygen. The enzymes, namely SOD, POD, CAT, and GSH, served as most responsive to clear away ROS and lower the stress. The results of this study suggested that the presence of Pb caused no visible adverse symptoms in P. opuntiae. Moreover, biosorption and bioaccumulation are two essential approaches involved in Pb removal by P. opuntiae and are established as worthwhile agents for the remediation of Pb from the environment.