ABSTRACT
This work presents the modification of polyorganosiloxane microparticles by surface-initiated thiol-ene photochemistry. By this photocoating, we prepared different core/shell particles with a polymeric shell within narrow size distributions (PDI = 0.041-0.12). As core particle, we used highly monodisperse spherical polyorganosiloxane particles prepared from (3-mercaptopropyl)trimethoxysilane (MPTMS) with a radius of 0.49 µm. We utilize the high surface coverage of mercaptopropyl functions to generate surface-localized radicals upon irradiation with UVA-light without additional photoinitiator. The continuous generation of radicals was followed by a dye degradation experiment (UV/vis spectroscopy). Surface-localized radicals were used as copolymer anchoring sites ("grafting-onto" deposition of different PB-b-PS diblock copolymers) and polymerization initiators ("grafting-from" polymerization of PS). Photocoated particles were characterized for their morphology (SEM, TEM), size, and size distribution (DLS). For PS-coated particles, the polymer content (up to 24% in 24 h) was controlled by the polymerization time upon UVA exposure. The coating thickness was evaluated by thermogravimetric analysis (TGA) using a simple analytical core/shell model. Raman spectroscopy was applied to directly follow the time-dependent consumption of thiols by photoinitiation.
ABSTRACT
This work aims at establishing a link between process conditions and resulting micromechanical properties for aminoplast core/shell microcapsules. The investigated capsules were produced by the in situ polymerization of melamine formaldehyde resins, which represents a widely used and industrially relevant approach in the field of microencapsulation. Within our study, we present a quantitative morphological analysis of the capsules' size and shell thickness. The diameter of the investigated capsules ranged from 10 to 50 µm and the shell thickness was found in a range between 50 and 200 nm. As key parameter for the control of the shell thickness, we identified the amount of amino resin per total surface area of the dispersed phase. Mechanical properties were investigated using small deformations on the order of the shell thickness by atomic force microscopy with a colloidal probe setup. The obtained capsule stiffness increased with an increasing shell thickness from 2 to 30 N/m and thus showed the same trend on the process parameters as the shell thickness. A simple analytical model was adopted to explain the relation between capsules' geometry and mechanics and to estimate the elastic modulus of the shell about 1.7 GPa. Thus, this work provides strategies for a rational design of microcapsule mechanics.
