In Situ Formation of a Relatively Transparent Ion-Associate Liquid Phase from an Aqueous Phase and Its Application to Microextraction/High-Performance Liquid Chromatography-Fluorescence Detection of Bisphenol A in Water.

The design of a simple approach enabling the detection of bisphenol A (BPA) in water samples without the need for large amounts of solvents is of utmost importance. This paper reports a simple method for the separation, concentration, and quantification of BPA in water samples using high-performance liquid chromatography with fluorescence detection (HPLC-FLD) after its microextraction into an in situ formed organic ion-associate (IA) liquid phase (LP). Novel IA phase components without conjugated double bonds, such as benzene rings, were investigated. Ethylhexyloxypropylamine hydrochloride and sodium dodecyl sulfate solutions were added to the water samples to form IAs. The aqueous phase and ion-associate liquid phase (IALP) were separated by centrifugation. The aqueous phase was removed, and the liquid phase was recovered and measured using HPLC-FLD or HPLC-electrochemical detection (ECD). The concentrated phase (IALP) had a relatively low viscosity and could be injected directly into the chromatograph without dissolving it in organic solvents. The detection limits for BPA by HPLC-FLD and HPLC-ECD were 0.009 and 0.3 µg L-1, respectively.

Effects of paddy irrigation-drainage system on water quality and productivity of small rivers in the Himi region of Toyama, Central Japan.

The aim of this study was to clarify the impact of differences between historical and recently introduced irrigation and drainage management systems on water quality in the rivers around paddy fields. We investigated the seasonal variation in nutrients concentration and dissolved organic carbon (DOC) components in single- (used for intake only) and dual-purpose (used for both intake and drainage) channels during a 4-year period in the Himi region of Toyama, Central Japan. The system of dual-purpose channel has traditionally been used in the region of this study. A total of 197 three-dimensional excitation-emission matrix (3DEEM) fluorescence spectra of DOM in waters were applied for the parallel factor analysis (PARAFAC) modeling. Based on the 3DEEM and PARAFAC, the abundance of terrestrial humic-like components in the dual-purpose channel was significantly higher than that in the single-purpose channel. The even long-chain n-fatty acids derived associated with rice cropping in sediments of the dual-purpose channels were 22-30-fold higher than that of the single-purpose channel. In addition, the turbidity values of the river waters had significantly positive linear correlations with concentrations of K+, DOC, and humic-like components. These observations indicate that the dissolved nutrient concentrations in the river water were higher in the dual-purpose channel compared to those of the single-purpose channel, which may be supplied by leaching from the inflow of soil particles from the paddy fields. During the mid-irrigation period, the quantity of epiphytic chlorophyll a on artificial substrate tiles in the dual-purpose channel were 3.1-4.1-fold higher than that in the single-purpose channel. This study clear that the input of paddy drainage during the irrigation season significantly changes the DOC components in river waters and irrigation management is strongly linked to the primary production in agricultural channels. Therefore, it is important to consider the impact of the introduction of different irrigation and drainage management systems on water quality and productivity in order to maintain the riverine ecosystems around rice paddies, which are based on historical water use systems.

Simple solid-phase colorimetry for trace Cr(VI) by combination of complexation with diphenylcarbazide and ion-pair solid-phase extraction with sedimentable dispersed particulates.

A highly sensitive and simple solid-phase colorimetry for Cr(VI) was proposed. It was based on the ion-pair solid-phase extraction of Cr-diphenylcarbazide (DPC) complex with sedimentable dispersed particulates. The concentration of Cr(VI) was measured from the color tones obtained by image analysis of the photo of sediment. Various conditions, e.g., material and amounts of adsorbent particulates, chemical properties and concentration of counter ions, and pH, were optimized for the formation and quantitative extraction of the complex. In the recommended procedure, 1 mL of sample was put into a 1.5 mL microtube where powder form adsorbent and reagents, i.e., XAD-7HP particles, DPC, sodium dodecyl sulfate, amido sulfuric acid, and sodium chloride had been packed. The analytical operation was completed within 5 min by gently shaking the microtube and allowing it to stand until enough amounts of particulates were deposited to take a picture. Chromium (VI) up to 2.0 ppm was determined, and the detection limit was 0.0034 ppm. The sensitivity was enough to determine Cr(VI) at lower concentrations than the water quality of standard (0.02 ppm). This method was successfully applied to the analysis of simulated industrial wastewater samples. The stoichiometry of the extracted chemical species was also investigated by applying the same equilibrium model as the ion-pair solvent extraction.

Removal of humic acid interference in soil enzymatic analysis using poly-γ-glutamic acid.

Soil enzymes are biological indicators in environmental and agricultural monitoring. However, brownish humic acid (HA) in samples interferes significantly with various analytical methods, especially in optical-based techniques. Here, we implemented a coagulation-flocculation process to carry out continuously an enzymatic reaction without separation and transfer of a sample solution. The elimination of HA in a soil suspension using poly-γ-glutamic acid (PGA) by coagulation to minimize the HA interference in soil enzymatic analysis was investigated. As a result of the optimization of preliminary parameters, the removal efficiency of HA was > 92% in 100 mg L-1 HA in neutral pH, using 100 mg L-1 PGA and aluminum trivalent as a coagulant aid. However, the fluorescent intensity of the enzyme product (i.e., 4-methylumbelliferone) decreases by about 50% as HA was removed under the conditions used. A decrease in the enzymatic detection of 3,3',5,5'-tetramethylbenzidine (TMB) was not observed from treated samples even though the initial level of HA was different. The results suggested that the coagulation-flocculation approach is suitable for the reduction of HA interference, while maintaining target analyte detection. Therefore, the proposed sample treatment can be used to examine enzyme activity based on TMB product detection without regular standard addition calibration.

Lossy mode resonance fiber-optic sensor based on ZnO particles fabricated by chemical bath deposition.

We present a lossy mode resonance (LMR) sensor fabricated by chemical bath deposition (CBD) using a U-shaped optical fiber with an exposed core. The ZnO particles that generate LMR were prepared by a very costly method in three steps via permanganate activation and the deposition of ZnO on the fiber core using CBD. The process of deposition was monitored in real time through the optical fiber, and a clear absorption spectrum with an LMR peak was obtained. The surface of the sensor with absorbance reaching 1.0 was covered with nano- to submicron particles of ZnO. The refractive index (RI) sensitivity of the sensor was measured using sucrose solution and was found to increase as the amounts of ZnO on the sensor increased, reaching 23 Abs/RI unit (RIU). The RI resolutions of the sensors with absorbance reaching 0.40, 0.65, and 1.0 during CBD were determined as ΔRI = 0.000060, 0.00017, and 0.00018, respectively, with a 99.7% confidence interval for the RI. Pretreatment during CBD was found to dramatically affect the fabrication of LMR sensors owing to their size and occupancy of deposited ZnO particles, the effects of which can be observed in real time using fiber optics.

Colorimetric analysis based on solid-phase extraction with sedimentable dispersed particulates: demonstration of concept and application for on-site environmental water analysis.

A novel simple and functional colorimetric methodology for on-site environmental water analysis was proposed. This method combines coloration of the analyte and extraction of the colored species on dispersed particulates during their sedimentation in the same container. The whole analysis can be performed within 15 min by comprising the addition of 1 mL of sample solution into a 1.5-mL microtube containing the powders of coloring reagents and the sedimentable fine particulates as an adsorbent. The analyte is determined by comparing the sediment color with the standard color by visual inspection or the color information of the photo image. The potential of this methodology was demonstrated through developing colorimetry for Fe2+ with o-phenanthroline, NO2- by azo-dye formation, HCHO by the MBTH method, and PO43- by the 4-aminoantipyrine method based on the enzyme reactions. The material, size, amount of the adsorbent particles, and other conditions were optimized for each analytes. The advantages of the methodology were as follows: high sensitivity, easy controllability of the sensitivity over the wide range by the amount, size, and material of the particulates, lower interference from the colored matrix components due to obtaining the color data from not the aqueous phase but the sedimented particulates, and acceleration of the color development rate by the particulates as seen in NO2- determination as consequence shorten the operation time. A simple device equipped with twin cells was proposed for on-site analysis which contains two successive different coloring operations. The developed methods were successfully applied to the environmental water samples with the good agreement of the results with those by the usual instrumental methods.

U-shaped plastic optical fiber sensor for scale deposition in hot spring water.

Fiber optic sensors for monitoring scale deposition in geothermal brine and hot spring water should be safe, easily fabricated, and readily disposable. These desired features already have been enhanced in plastic optical fibers (POFs) and U-shaped sensors for other applications. The present work reports a U-shaped POF sensor for CaCO3 scale deposition. The sensors were easily fabricated by thermally bending the bulk POF without removing the cladding. At the bend, the percentage of total internal reflection between the water and the POF surface is affected by the high refractive index of the CaCO3 deposit. The optical responses of the U-shaped sensor to CaCO3 formation were investigated in a mixture of calcium chloride dehydrate and sodium hydrogen carbonate using a white-light source and a spectroscopic detector. The sensor was responsive to CaCO3 formation on the sensor surface and was especially sensitive at small bending radii. The sensitivity was further enhanced by increasing the number of bends. Finally, the U-shaped POF sensor was applied to the monitoring of CaCO3 scale deposition in hot spring water sampled at Matsushiro, Japan.

Investigation and modeling of diurnal variation in suburban ambient formaldehyde concentration.

Formaldehyde (HCHO) is a naturally occurring compound found in ambient air which can induce cancer and sick-building syndrome. It plays an important role in the formation of OH radicals, which are connected to the formation of various airborne chemicals. Herein, we present a simple modeling for the simulation of diurnal variations in the HCHO concentration of ambient air. This was achieved using data collected during different seasons from November 2015 to March 2017 at a suburban location in Toyama City (Japan), where non-methane hydrocarbon (NMHC) levels were low at sub carbon ppm (ppmC) order. The modeling was based on the assumption that photochemical reactions of methane were the major factor of secondary HCHO formation. The model took into account the production and decomposition of HCHO by photochemical reactions as well as its loss due to other reactions such as dry deposition. Accordingly, the model's equation contained terms for solar radiation, temperature, and methane concentration. The results predicted using the model showed good agreement with the experimental data observed on fine days, i.e., except rainy, foggy, and heavily cloudy days. The relationships between HCHO concentration and solar radiation/temperature on different days as well as the seasonal variation of HCHO concentration were also interpreted by the proposed model. This study contributes to the evaluation of the pollution levels of formaldehyde. Moreover, the model may be used to demonstrate the impact of increasing methane levels, with regard to global warming and the background levels of HCHO in the atmosphere.

Effect of humic acids on the toxicity of pollutants to Chlamydomonas reinhardtii: Investigation by a microscale algal growth inhibition test.

Dissolved humic substances (DHSs) are the major components of organic matter in the aquatic environment. DHSs are well known to considerably affect the speciation, solubility, and toxicity of a wide variety of pollutants in the aquatic environment. In this study, the effects of the toxicity of heavy metals and hydrophobic organic pollutants (HOPs) on Chlamydomonas reinhardtii in the presence of humic acid (HA) were examined by a microscale algal growth inhibition (µ-AGI) test based on spectrophotometric detection. To clarify the relationship between the chemical properties of HAs and the toxicity change of pollutants, eight HAs from different sources were prepared and used. HAs were responsible for mitigating the toxicity of Hg, Cu, pesticides (γ-HCH, 2,4-D, and DDT), and polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap), anthracene (Ant), and benzo[a]pyrene (BaP). In particular, an approximately 100-fold decrease in the toxicity of BaP was observed in the presence of 10 ppm HAs extracted from tropical peat. The results indicated that the carboxylic group content and the HA molecular weight are correlated to the changes in the heavy metal toxicity. For HOPs, the aromaticity and polarity of HAs are crucial for mitigating their toxicity. Furthermore, it was clearly shown that the lake water including a high concentration of DHSs collected from Central Kalimantan, Indonesia, reduced the toxicity of Hg and γ-HCH on Chlamydomonas reinhardtii. Graphical abstract.

Electrochemical Long Period Fiber Grating Sensing for Electroactive Species.

We present an electrochemical long period fiber grating (LPFG) sensor for electroactive species with an optically transparent electrode. The sensor was fabricated by coating indium tin oxide onto the surface of LPFG using a polygonal barrel-sputtering method. LPFG was produced by an electric arc-induced technique. The sensing is based on change in the detection of electron density on the electrode surface during potential application and its reduction by electrochemical redox of analytes. Four typical electroactive species of methylene blue, hexaammineruthenium(III), ferrocyanide, and ferrocenedimethanol were used to investigate the sensor performance. The concentrations of analytes were determined by the modulation of the potential as the change in transmittance around the resonance band of LPFG. The sensitivity of the sensor, particularly to methylene blue, was high, and the sensor responded to a wide concentration range of 0.001 mM to 1 mM.

Evanescent-Wave Fiber Optic Sensing of the Anionic Dye Uranine Based on Ion Association Extraction.

Herein, we propose an evanescent-wave fiber optic sensing technique for the anionic dye uranine based on ion association extraction. The sensor was prepared by removing a section of the cladding from a multimode fiber and hydrophobization of the exposed core surface. Uranine was extracted in association along with hexadecyltrimethylammonium (CTA) ion onto the fiber surface and detected via absorption of the evanescent wave generated on the surface of the exposed fiber core. The effect of CTA+ concentration added for ion association was investigated, revealing that the absorbance of uranine increased with increasing CTA+ concentration. A change in the sensor response as a function of the added uranine concentration was clearly observed. The extraction data were analyzed using a distribution equilibrium model and a Freundlich isotherm. The uranine concentration in the evanescent field of the fiber optic was up to 54 times higher than that in the bulk solution, and the limit of detection (3σ) for uranine was found to be 1.3 nM.

Fabrication of a cell-recognition/electron-transfer/cross-linker, peptide-immobilized electrode for the sensing of K562 cells.

We designed an electrode that has the ability to sense a target cell. This new electrode is intended for use in cell recognition via electron-transfer and cross-linker peptide immobilization. Myelopeptide-4 (MP-4:FRPRIMTP) is a marrow-origin peptide that interacts with receptors of the human leukemia cell line (K562 cells), and allows their differentiation. The YYYYC electron-transfer peptide improves the electron-transfer accessibility from an electroactive compound to an electrode. Oligoalanine plays the role of a cross-linker that immobilizes a peptide series (Ac-FRPRIMTPYYYYCAAAAA) to collagen, which then allows it to be cast onto an electrode. Use of the electrode with a peptide increased the peak currents of [Fe(CN)6]4-/3- and also improved the reversibility of redox. These improvements are due to the interaction between [Fe(CN)6]4-/3- and the peptide. When electrochemical impedance spectroscopy (EIS) measurements were carried out using a collagen/peptide probe-immobilized electrode, the electron transfer resisitance was lower than that without the peptide. The detection of K562 cells was based on an increase in resistance, because MP-4 was bound to the receptors on the cell surface. The responses were linear and ranged in number from 27 to 2,000 cells/mLwith a detection limit of 8 cells/mL. Recoveries of 50 and 1,000 cells/mL in human serum were accomplished at rates of 98 and 101%, respectively. Consequently, the proposed procedure is a powerful new concept for cytosensing.

High-heat Effects on the Physical and Chemical Properties of Soil Organic Matter and Its Water-soluble Components in Japan's Forests: A Comprehensive Approach Using Multiple Analytical Methods.

Wildfires that expose the soil organic layer to high heat levels can alter soil organic matter (SOM), which includes water-soluble organic matter (WSOM) components. Various evaluation methods were used to characterize and quantify the effects of high heat levels on SOM and WSOM, including ion chromatography, thermogravimetry-differential thermal analysis (TG-DTA), colorimetry, elemental analysis, pyrolysis-gas chromatography-mass spectrometry using tetramethylammonium hydroxide (TMAH-py-GC/MS), total organic carbon (TOC) analysis, three-dimensional excitation-emission matrix (3DEEM) spectroscopy, and high-performance size-exclusion chromatography. In this study, we applied each of these evaluation methods using soil samples that were collected from broadleaf, coniferous, and bamboo forests and peatland in Japan and exposed to different initial high heat levels. Based on the TG-DTA results, the remaining mass in select soil samples markedly decreased when reheated to approximately 200°C. Comparatively, the TMAH-py-GC/MS results indicated a drastic change in SOM composition and the production of low molecular organic components (

Organic Ion-associate Phase Extraction/Back-microextraction for the Preconcentration and Determination of Lithium Using 2,2,6,6-Tetramethyl-3,5-heptanedione by Liquid Electrode Plasma Atomic Emission Spectrometry and GF-AAS in Environmental Water.

We developed an ion-associate phase (IAP)-extraction/acid back-extraction system for the preconcentration and atomic spectrometric determination of lithium trace amounts in water. The chelating reagent for lithium also works as a constituent of the extraction phase. The lithium in a 10 mL sample solution was converted through a chelate complex reaction with 2,2,6,6-tetramethyl-3,5-heptanedione (HDPM). The addition of a benzyldimethyltetradecylammonium ion caused the formation of IAP suspension in the solution. Centrifugation of the solution led to the isolation of a liquid organic phase and the lithium complex was extracted as the upper phase from the centrifuge tube. After the aqueous phase was removed, lithium was back-extracted with a 400 µL nitric acid solution from the IAP. The acid phase was measured using liquid-electrode-plasma atomic-emission-spectrometry (LEP-AES) or graphite-furnace atomic-absorption spectroscopy (GF-AAS). The detection limits were 0.02 mg/L for LEP-AES and 0.02 µg/L for GF-AAS. This system was applied to the determination of environmental water. The HDPM in the organic phase was reusable.

Investigation of the effects of electromagnetic field treatment of hot spring water for scale inhibition using a fibre optic sensor.

Treatment with an electromagnetic field, one of the potential techniques to inhibit scale deposition from water, has the advantage of not requiring the addition of any chemicals. Field tests using a fibre optic sensor were conducted to evaluate the effect that the treatment of hot spring water in Matsushiro, Japan with an electromagnetic field had on calcium carbonate scale formation. The optical response to scale deposition recorded by the fibre optic sensor decreased as a consequence of the application of an electromagnetic field, and the effectiveness of scale formation inhibition depended on the frequency of the electromagnetic field. This evidence was compared with results from changes in scale mass measured using the quartz crystal microbalance (QCM) method. Mass increases of the scale formed on the quartz crystal surface in hot spring water were inhibited by electromagnetic field treatment. These results were verified performing a column flow test, whereby the flow rate of hot spring water through a column was measured.

Label-free cytosensing of cancer cells based on the interaction between protein and an electron-transfer carbohydrate-mimetic peptide.

We used an electron-transfer carbohydrate-mimetic peptide (YYYYC) to construct an electrochemical cytosensing system. Magnetic beads were modified with either asialofetuin (ASF) or soybean agglutinin (SBA) to evaluate the effect on cell sensing. Because SBA binds to the galactose residue that exists at the terminals of the carbohydrate chains in ASF, the target protein was accumulated on the protein magnetic beads. SBA is an example of N-acetylgalactosamine- and galactose-binding proteins that readily combine with YYYYC. When the peptides and protein-immobilized beads competed for a target protein, the peak current of the peptides changed according to the concentration of the protein at the 10-12 M level. Next, human myeloid leukemia cells (K562 cell) were measured using the peptide and the carbohydrate chains on the cell surface that recognize SBA. The electrode response was linear to the number of K562 cells and ranged from 1.0 × 102 to 5.0 × 103 cells mL-1. In addition, detection of a human liver cancer cell (HepG2 cell) was carried out using interactions with the peptide, the ASF receptors in HepG2 cells, and the carbohydrate chains of ASF. The peak currents were proportional and ranged between 5.0 × 101 and 1.5 × 103 cells mL-1. When the values estimated from an electrochemical process were compared with those obtained by ELISA, the results were within the acceptable range of measurement error.

Micro-organic Ion-associate Phase Extraction/micro-volume Back-extraction for the Preconcentration and GF-AAS Determination of Cadmium, Nickel and Lead in Environmental Water.

Micro-organic ion-associate phase (IAP) extraction was combined with a micro-volume back-extraction (MVBE) to reduce coexisting components and viscosity in the concentrates. Heavy metals were converted into a complex with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)phenol in a 40-mL sample solution, and were extracted into ion associates. After centrifugation and discarding the aqueous phase, trace metals were stripped from IAP into a nitric acid solution, followed by GF-AAS determination. Only one vessel was required for 400-fold enrichment. The detection limits (3σb) for Cd, Ni, and Pb were 0.6, 3.7, and 0.8 ng/L, respectively. This method was applied in recovery tests in seawater.

Effects of forest fire on the properties of soil and humic substances extracted from forest soil in Gunma, Japan.

Increases in global wildfires and fire severity are expected to result from global warming. Severe wildfires not only burn surface vegetation but also affect forest soil. Humic substances play key roles in the transport of nutrients and the carbon cycle in terrestrial ecosystems. In this study, we evaluated the effects of forest fires on the chemical properties of fulvic acid (FA) and humic acid (HA) extracted from non-burned and burned forest soils in Gunma, Japan. The differential thermal analysis of FA indicated that the intensity of exothermic reaction peak at 400 °C was 2-fold higher than that from non-burned soil. Based on pyrolysis-gas chromatography-mass spectrometry analysis with tetramethyl ammonium hydroxide, the amount of pyrolysate compounds in FA from burnt soil was significantly lower than that in FA from non-burnt soil. Therefore, we can conclude that the forest fire caused the significant change in the properties of FA such as increasing the aromaticity and refractory. In addition, the concentration of dissolved organic carbon with low molecular weight in surface soil increased after forest fire. This study suggests that the denaturation of soil organic matter by wildfire can affect the carbon cycle in terrestrial ecosystems.