Activation of Water-Splitting Photocatalysts by Loading with Ultrafine Rh-Cr Mixed-Oxide Cocatalyst Nanoparticles.

The activity of many water-splitting photocatalysts could be improved by the use of RhIII -CrIII mixed oxide (Rh2-x Crx O3 ) particles as cocatalysts. Although further improvement of water-splitting activity could be achieved if the size of the Rh2-x Crx O3 particles was decreased further, it is difficult to load ultrafine (<2 nm) Rh2-x Crx O3 particles onto a photocatalyst by using conventional loading methods. In this study, a new loading method was successfully established and was used to load Rh2-x Crx O3 particles with a size of approximately 1.3 nm and a narrow size distribution onto a BaLa4 Ti4 O15 photocatalyst. The obtained photocatalyst exhibited an apparent quantum yield of 16 %, which is the highest achieved for BaLa4 Ti4 O15 to date. Thus, the developed loading technique of Rh2-x Crx O3 particles is extremely effective at improving the activity of the water-splitting photocatalyst BaLa4 Ti4 O15 . This method is expected to be extended to other advanced water-splitting photocatalysts to achieve higher quantum yields.

γ-Alumina-supported Pt17 cluster: controlled loading, geometrical structure, and size-specific catalytic activity for carbon monoxide and propylene oxidation.

Although Pt is extensively used as a catalyst to purify automotive exhaust gas, it is desirable to reduce Pt consumption through size reduction because Pt is a rare element and an expensive noble metal. In this study, we successfully loaded a Pt17 cluster on γ-alumina (γ-Al2O3) (Pt17/γ-Al2O3) using [Pt17(CO)12(PPh3)8]Cl n (n = 1, 2) as a precursor. In addition, we demonstrated that Pt is not present in the form of an oxide in Pt17/γ-Al2O3 but instead has a framework structure as a metal cluster. Moreover, we revealed that Pt17/γ-Al2O3 exhibits higher catalytic activity for carbon monoxide and propylene oxidation than γ-Al2O3-supported larger Pt nanoparticles (PtNP/γ-Al2O3) prepared using the conventional impregnation method. Recently, our group discovered a simple method for synthesizing the precursor [Pt17(CO)12(PPh3)8]Cl n . Furthermore, Pt17 is a Pt cluster within the size range associated with high catalytic activity. By combining our established synthesis and loading methods, other groups can conduct further research on Pt17/γ-Al2O3 to explore its catalytic activities in greater depth.

Alloy Clusters: Precise Synthesis and Mixing Effects.

Metal alloys exhibit functionalities unlike those of single metals. Such alloying has drawn considerable research interest, particularly for nanoscale particles (metal clusters/nanoparticles), from the viewpoint of creating new functional nanomaterials. In gas phase cluster research, generated alloy clusters can be spatially separated with atomic precision in vacuum. Thus, the influences of increases or decreases in each element on the overall electronic structure of the cluster can be elucidated. However, to further understand the related mixing and synergistic effects, alloy clusters need to be produced on a large scale and characterized by various techniques. Because alloy clusters protected by thiolate (SR) can be synthesized by chemical methods and are stable in both solution and the solid state, these clusters are ideal study materials to better understand the mixing and synergistic effects. Moreover, the alloy clusters thus created have potential applications as functional materials. Therefore, since 2008, we have been working on establishing a precise synthesis method for SR-protected alloy clusters and elucidating their mixing and synergistic effects. Early research focused on the precise synthesis of alloy clusters wherein some of the Au in the stable SR-protected gold clusters ([Au25(SR)18]- and [Au38(SR)24]0) is replaced by Pd, Ag, or Cu. These studies have shown that Pd, Ag, or Cu substitute at different metal sites. We also have examined the as-synthesized alloy clusters to clarify the effect of substitution by each element on the physical and chemical properties of the clusters. However, in early studies, the number of substitutions could not be controlled with atomic accuracy for [Au25- xM x(SR)18]- (M = Ag or Cu). Then, in following research, methods have been established to obtain alloy clusters with control over the composition. We have succeeded in developing a method for controlling the number of Ag substitutions with atomic precision and thereby elucidating the effect of Ag substitution on the electronic structure of clusters with atomic precision. Concurrently, we also studied alloy clusters containing multiple heteroelements with different preferential substitution sites. These results revealed that the effects of substitution of each element can be superimposed on the cluster by combining multiple elemental substitutions at different sites. In addition, we successfully developed methods to synthesize alloy clusters with heterometal core. These findings are expected to lead to clear design guidelines for developing new functional nanomaterials.

Atomic and Isomeric Separation of Thiolate-Protected Alloy Clusters.

Techniques to control the chemical compositions and geometric structures of alloy clusters are indispensable to understand the correlation between the structures and physical/chemical properties of alloy clusters. In this study, we established a method to separate thiolate-protected 25-atom gold-silver alloy clusters (Au25- xAg x(SR)18) according to their chemical composition and structural isomer. Furthermore, using this method, we revealed that an isomeric distribution of the products exists in Au25- xAg x(SR)18 ( x ≥ 2) and that the distribution of these isomers depends on the synthesis method and standing time in solution. In this study, it was also demonstrated that the continuous discretization of the electronic structure is induced by the Ag substitution. This method can also be used to separate mixtures of [Au24M(SR)18]0 (M = Au, Pt, or Pd) and other Au-Ag alloy clusters ([Au36- xAg x(SR)24]0 and [Au38- xAg x(SR)24]0). This method is expected to be used to obtain comprehensive knowledge of the structural-property correlation of alloy clusters.

Hetero-biicosahedral [Au24Pd(PPh3)10(SC2H4Ph)5Cl2]+ nanocluster: selective synthesis and optical and electrochemical properties.

A recent study implied that a hetero-biicosahedral 25-atom cluster composed of two kinds of icosahedral 13-atom clusters could serve as a molecular rectifier and dipole material. However, no hetero-biicosahedral 25-atom clusters containing three types of ligands, in this case, phosphines, halogens, and thiolates, have been reported. In this study, we selectively synthesized [Au24Pd(PPh3)10(SC2H4Ph)5Cl2]Cl (Au = gold, Pd = palladium, PPh3 = triphenylphosphine, SC2H4Ph = phenylethanethiolate, Cl = chloride), in which one Au was replaced with a Pd. The single-crystal X-ray structural analysis demonstrated that [Au24Pd(PPh3)10(SC2H4Ph)5Cl2]Cl was a hetero-biicosahedral 25-atom cluster in which the central atom of one icosahedral Au13 core was replaced by a Pd atom. Optical absorption spectroscopy suggested that the electronic structure of each individual icosahedral 13-atom core in [Au24Pd(PPh3)10(SC2H4Ph)5Cl2]+ was reasonably well maintained, similar to the case of [Au25(PPh3)10(SC2H4Ph)5Cl2]2+. Density functional theory calculation revealed that the peak splitting in the region below 2.2 eV of the optical absorption spectrum of [Au24Pd(PPh3)10(SC2H4Ph)5Cl2]+ is due to the splitting of HOMOs and also suggested that this cluster has dipole moment. Electrochemical measurements showed that [Au24Pd(PPh3)10(SC2H4Ph)5Cl2]+ was relatively stable to reduction. These results are expected to contribute to the development of molecular rectifiers and dipole materials based on hetero-biicosahedral 25-atom clusters.

Thiolate-Protected Trimetallic Au∼20Ag∼4Pd and Au∼20Ag∼4Pt Alloy Clusters with Controlled Chemical Composition and Metal Positions.

The mixing of heteroelements in metal clusters is a powerful approach to generate new physical/chemical properties and functions. However, as the kinds of elements increase, control of the chemical composition and geometric structure becomes difficult. We succeeded in the compositionally selective synthesis of phenylethanethiolate-protected trimetallic Au∼20Ag∼4Pd and Au∼20Ag∼4Pt clusters, Au∼20Ag∼4Pd(SC2H4Ph)18 and Au∼20Ag∼4Pt(SC2H4Ph)18. Single-crystal X-ray structural analysis revealed the precise position of each metal element in these metal clusters. Reacting with thiol at an elevated temperature was found to be important to direct the metal elements to the most stable positions. The electronic structures of these trimetallic clusters become more discretized than those of the related bimetallic clusters due to orbital splitting.

High-performance liquid chromatography mass spectrometry of gold and alloy clusters protected by hydrophilic thiolates.

In this work, we found two hydrophilic interaction liquid chromatography (HILIC) columns for high-performance liquid chromatography (HPLC) suitable for the high-resolution separation of hydrophilic metal clusters. The mass distributions of the product mixtures of hydrophilic metal clusters were evaluated via HPLC mass spectrometry (LC/MS) using these HILIC columns. Consequently, we observed multiple clusters that had not been previously reported for glutathionate (SG)-protected gold clusters (Aun(SG)m). Additionally, we demonstrated that Aun-xMx(SG)m alloy clusters (M = Ag, Cu, or Pd) in which part of the Au in the Aun(SG)m cluster is replaced by a heteroelement can be synthesized, similar to the case of hydrophobic alloy clusters. It is easy to evaluate the mass distributions of hydrophilic metal clusters using this method. Thus, remarkable progress in the synthesis techniques of hydrophilic metal clusters through the use of this method is anticipated, as is the situation for hydrophobic metal clusters.

Photo-induced H2 evolution from water via the dissociation of excitons in water-dispersible single-walled carbon nanotube sensitizers.

To observe a clear-cut example of the formation of mobile carriers from excitons on semiconducting single-walled carbon nanotubes (s-SWCNTs) surrounded by a medium with a high dielectric constant, water-dispersible s-SWCNT nanocomposites were fabricated by physical modifications using poly(amidoamine) dendrimers that contain an aliphatic core. The evolution of H2 from water using these s-SWCNT/dendrimer nanocomposites as photosensitizers under irradiation with visible light demonstrated a photo-induced electron transfer from the s-SWCNTs to the co-catalysts.

Understanding and Practical Use of Ligand and Metal Exchange Reactions in Thiolate-Protected Metal Clusters to Synthesize Controlled Metal Clusters.

It is now possible to accurately synthesize thiolate (SR)-protected gold clusters (Aun (SR)m ) with various chemical compositions with atomic precision. The geometric structure, electronic structure, physical properties, and functions of these clusters are well known. In contrast, the ligand or metal atom exchange reactions between these clusters and other substances have not been studied extensively until recently, even though these phenomena were observed during early studies. Understanding the mechanisms of these reactions could allow desired functional metal clusters to be produced via exchange reactions. Therefore, we have studied the exchange reactions between Aun (SR)m and analogous clusters and other substances for the past four years. The results have enabled us to gain deep understanding of ligand exchange with respect to preferential exchange sites, acceleration means, effect on electronic structure, and intercluster exchange. We have also synthesized several new metal clusters using ligand and metal exchange reactions. In this account, we summarize our research on ligand and metal exchange reactions.

SWCNT Photocatalyst for Hydrogen Production from Water upon Photoexcitation of (8, 3) SWCNT at 680-nm Light.

Single-walled carbon nanotubes (SWCNTs) are potentially strong optical absorbers with tunable absorption bands depending on their chiral indices (n, m). Their application for solar energy conversion is difficult because of the large binding energy (>100 meV) of electron-hole pairs, known as excitons, produced by optical absorption. Recent development of photovoltaic devices based on SWCNTs as light-absorbing components have shown that the creation of heterojunctions by pairing chirality-controlled SWCNTs with C60 is the key for high power conversion efficiency. In contrast to thin film devices, photocatalytic reactions in a dispersion/solution system triggered by the photoexcitation of SWCNTs have never been reported due to the difficulty of the construction of a well-ordered surface on SWCNTs. Here, we show a clear-cut example of a SWCNT photocatalyst producing H2 from water. Self-organization of a fullerodendron on the SWCNT core affords water-dispersible coaxial nanowires possessing SWCNT/C60 heterojunctions, of which a dendron shell can act as support of a co-catalyst for H2 evolution. Because the band offset between the LUMO levels of (8, 3)SWCNT and C60 satisfactorily exceeds the exciton binding energy to allow efficient exciton dissociation, the (8, 3)SWCNT/fullerodendron coaxial photocatalyst shows H2-evolving activity (QY = 0.015) upon 680-nm illumination, which is E22 absorption of (8, 3) SWCNT.

Tuning the electronic structure of thiolate-protected 25-atom clusters by co-substitution with metals having different preferential sites.

Trimetallic Au24-xAgxPd and tetrametallic Au24-x-yAgxCuyPd clusters were synthesized by the subsequential metal exchange reactions of dodecanethiolate-protected Au24Pd clusters. EXAFS measurements revealed that Pd, Ag, and Cu dopants preferentially occupy the center and edge sites of the core, and staple sites, respectively. Spectroscopic and theoretical studies demonstrated that the synergistic effects of multiple substitutions on the electronic structures are additive in nature.

Hierarchy of bond stiffnesses within icosahedral-based gold clusters protected by thiolates.

Unique thermal properties of metal clusters are believed to originate from the hierarchy of the bonding. However, an atomic-level understanding of how the bond stiffnesses are affected by the atomic packing of a metal cluster and the interfacial structure with the surrounding environment has not been attained to date. Here we elucidate the hierarchy in the bond stiffness in thiolate-protected, icosahedral-based gold clusters Au25(SC2H4Ph)18, Au38(SC2H4Ph)24 and Au144(SC2H4Ph)60 by analysing Au L3-edge extended X-ray absorption fine structure data. The Au-Au bonds have different stiffnesses depending on their lengths. The long Au-Au bonds, which are more flexible than those in the bulk metal, are located at the icosahedral-based gold core surface. The short Au-Au bonds, which are stiffer than those in the bulk metal, are mainly distributed along the radial direction and form a cyclic structural backbone with the rigid Au-SR oligomers.

High-resolution separation of thiolate-protected gold clusters by reversed-phase high-performance liquid chromatography.

Thiolate (RS)-protected gold clusters (Aun(SR)m) have attracted much attention as building blocks of functional nanomaterials. Our group has been studying the high-resolution separation of Aun(SR)m clusters using reversed-phase high-performance liquid chromatography. In this perspective, we summarize our recent results on the separation of Aun(SR)m clusters and their doped clusters according to the core size, charge state, ligand composition, and coordination isomers. Additionally, this perspective describes new findings obtained by using high-resolution separation and future prospects for the separation of such types of metal clusters. We believe that the techniques and knowledge gained in this study would contribute to the creation of Aun(SR)m clusters with the desired functions and associated functional nanomaterials.

Effect of trimetallization in thiolate-protected Au(24-n)Cu(n)Pd clusters.

We synthesized a mixture of Au24-nCunPd(SC12H25)18 (n = 0-3) and Au25-nCun(SC12H25)18 (n = 0-7) and compared their stability. The results showed that, in a cluster containing one Cu atom, the presence of Pd is effective in improving the cluster stability. Conversely, the presence of Pd has different effects depending on the number of Cu atoms in the cluster: cluster formation was inhibited for clusters containing four or more Cu atoms.

A critical size for emergence of nonbulk electronic and geometric structures in dodecanethiolate-protected Au clusters.

We report on how the transition from the bulk structure to the cluster-specific structure occurs in n-dodecanethiolate-protected gold clusters, Au(n)(SC12)m. To elucidate this transition, we isolated a series of Au(n)(SC12)m in the n range from 38 to ∼520, containing five newly identified or newly isolated clusters, Au104(SC12)45, Au(∼226)(SC12)(∼76), Au(∼253)(SC12)(∼90), Au(∼356)(SC12)(∼112), and Au(∼520)(SC12)(∼130), using reverse-phase high-performance liquid chromatography. Low-temperature optical absorption spectroscopy, powder X-ray diffractometry, and density functional theory (DFT) calculations revealed that the Au cores of Au144(SC12)60 and smaller clusters have molecular-like electronic structures and non-fcc geometric structures, whereas the structures of the Au cores of larger clusters resemble those of the bulk gold. A new structure model is proposed for Au104(SC12)45 based on combined approach between experiments and DFT calculations.

A novel concept for the synthesis of multiply doped gold clusters [(M@Au(n)M'(m))L(k)](q+).

Heterometal-doped gold clusters are poorly accessible through wet-chemical approaches and main-group-metal- or early-transition-metal-doped gold clusters are rare. Compounds [M(AuPMe3 )11 (AuCl)](3+) (M=Pt, Pd, Ni) (1-3), [Ni(AuPPh3 )(8-2n) (AuCl)3 (AlCp*)n ] (n=1, 2) (4, 5), and [Mo(AuPMe3 )8 (GaCl2 )3 (GaCl)](+) (6) were selectively obtained by the transmetalation of [M(M'Cp*)n ] (M=Mo, E=Ga, n=6; M=Pt, Pd, Ni, M'=Ga, Al, n=4) with [ClAuPR3 ] (R=Me, Ph) and characterized by single-crystal X-ray diffraction and ESI mass spectrometry. DFT calculations were used to analyze the bonding situation. The transmetalation proved to be a powerful tool for the synthesis of heterometal-doped gold clusters with a design rule based on the 18 valence electron count for the central metal atom M and in agreement with the unified superatom concept based on the jellium model.

Au25 Clusters Containing Unoxidized Tellurolates in the Ligand Shell.

We report herein the synthesis and characterization of Au25 clusters containing tellurolates (TePh) in the ligand shell ([Au25(TePh)n(SC8H17)18-n](-); n = 1-18). [Au25(TePh)n(SC8H17)18-n](-) clusters were synthesized by reacting [Au25(SC8H17)18](-) with diphenyl ditelluride ((PhTe)2) in solution. Characterization of the products by mass spectrometry and X-ray absorption fine structure analysis revealed that the tellurolates in [Au25(TePh)n(SC8H17)18-n](-), unlike those in tellurolate-protected gold nanoparticles, were not oxidized. Various experiments on the products and theoretical calculations on related clusters revealed that protection by the tellurolates distorts (expands) the central Au13 core and decreases the HOMO-LUMO gap of the Au25 clusters.

Recent Progress in the Functionalization Methods of Thiolate-Protected Gold Clusters.

Nanomaterials that exhibit both stability and functionality are currently considered to hold great promise as components of nanotechnology devices. Thiolate-protected gold clusters (Aun(SR)m) have long attracted attention as functional nanomaterials. Magic Aun(SR)m clusters are an especially stable group of thiolate-protected clusters that have particularly high potential as functional materials. Although numerous application experiments have been conducted for magic Aun(SR)m clusters, it is important that functionalization methods are also established to allow for effective utilization of these materials. The results of recent research on heteroatom doping and the use of other chalcogenide ligands strongly suggest that these strategies are promising as functionalization methods of magic Aun(SR)m clusters. In this Perspective, we focus on studies relating to three representative types of magic clusters-Au25(SR)18, Au38(SR)24, and Au144(SR)60-and discuss the recent progress and future issues.

A twisted bi-icosahedral Au(25) cluster enclosed by bulky arenethiolates.

Ligation of 2,6-diphenylbenzenethiol (DppSH) onto Au clusters stabilized by poly(N-vinyl-2-pyrrolidone) and subsequent core etching yielded a single cluster Au25(SDpp)11. High-energy X-ray diffraction measurement showed that Au25 constitutes a core in Au25(SDpp)11. We propose a bi-icosahedral Au25 core whose 22 Au surface atoms are capped directly by 11 bulky arenethiolates.

Toward the creation of stable, functionalized metal clusters.

Nanomaterials which exhibit both stability and functionality are currently considered to hold the most promise as components of nanotechnology devices. Thiolate (RS)-protected gold nanoclusters (Aun(SR)m) have attracted significant attention in this regard and, among these, the magic clusters are believed to be the best candidates since they are the most stable. We have investigated the effects of heteroatom doping, protection by selenolate ligands and protection by photoresponsive thiolates on the stability and physical/chemical properties of these clusters. Through such studies, we have attempted to establish methods of modifying magic Aun(SR)m clusters as a means of creating metal clusters that are both robust and functional. This paper summarizes our studies towards this goal and the obtained results.