Starch as the Flame Retardant for Electrolytes in Lithium-Ion Cells.

The main purpose of this work is to illustrate the flame retardant properties of corn starch that is used as an additive to the classic electrolytes in lithium-ion cells. The advantages of using natural biomass include the increased biodegradability of the cell, compliance with the slogan of green chemistry, as well as the widespread availability and easy isolation of this ingredient. Due to the non-Newtonian properties of starch, it increases work safety and prevents the occurrence of thermal runaway as a shear-thinning fluid in the event of a collision. Thus, its use may, in the future, prevent explosions that affect electric cars with lithium-ion batteries without significantly degrading the electrochemical parameters of the cell. In the manuscript, the viscosity test, flash point measurements, the SET (self-extinguishing time) test and conductivity measurements were performed, in addition to the determination of electrochemical impedance spectroscopy (EIS) for the anode system. Additionally, the kinetic and thermodynamic parameters, for both flow and conductivity, were determined for a deeper analysis; this constitutes the scientific novelty of this study. Through mathematical analysis, it was shown that the optimal amount of added starch is 5%. This is supported primarily by the determined kinetic and thermodynamic parameters and the fact that the system did not gel during heating.

Challenges for Safe Electrolytes Applied in Lithium-Ion Cells-A Review.

The aspect of safety in electronic devices has turned out to be a huge challenge for the world of science. Thus far, satisfactory power and energy densities, efficiency, and cell capacities have been achieved. Unfortunately, the explosiveness and thermal runaway of the cells prevents them from being used in demanding applications such as electric cars at higher temperatures. The main aim of this review is to highlight different electrolytes used in lithium-ion cells as well as the flammability aspect. In the paper, the authors present liquid inorganic electrolytes, composite polymer-ceramic electrolytes, ionic liquids (IL), polymeric ionic liquids, polymer electrolytes (solvent-free polymer electrolytes (SPEs), gel polymer electrolytes (GPEs), and composite polymer electrolytes (CPEs)), and different flame retardants used to prevent the thermal runaway and combustion of lithium-ion batteries (LIBs). Additionally, various flame tests used for electrolytes in LIBs have been adopted. Aside from a detailed description of the electrolytes consumed in LIBs. Last section in this work discusses hydrogen as a source of fuel cell operation and its practical application as a global trend that supports green chemistry.

The Electrochemical Stability of Starch Carbon as an Important Property in the Construction of a Lithium-Ion Cell.

This paper shows use of starch-based carbon (CSC) and graphene as the anode electrode for lithium-ion cell. To describe electrochemical stability of the half-cell system and kinetic parameters of charging process in different temperatures, electrochemical impedance spectroscopy (EIS) measurement was adopted. It has been shown that smaller resistances are observed for CSC. Additionally, Bode plots show high electrochemical stability at higher temperatures. The activation energy for the SEI (solid-electrolyte interface) layer, charge transfer, and electrolyte were in the ranges of 24.06-25.33, 68.18-118.55, and 13.84-15.22 kJ mol-1, respectively. Moreover, the activation energy of most processes is smaller for CSC, which means that this electrode could serve as an eco-friendly biodegradable lithium-ion cell element.

Modern Nanocomposites and Hybrids as Electrode Materials Used in Energy Carriers.

Over the past decades, the application of new hybrid materials in energy storage systems has seen significant development. The efforts have been made to improve electrochemical performance, cyclic stability, and cell life. To achieve this, attempts have been made to modify existing electrode materials. This was achieved by using nano-scale materials. A reduction of size enabled an obtainment of changes of conductivity, efficient energy storage and/or conversion (better kinetics), emergence of superparamagnetism, and the enhancement of optical properties, resulting in better electrochemical performance. The design of hybrid heterostructures enabled taking full advantage of each component, synergistic effect, and interaction between components, resulting in better cycle stability and conductivity. Nowadays, nanocomposite has ended up one of the foremost prevalent materials with potential applications in batteries, flexible cells, fuel cells, photovoltaic cells, and photocatalysis. The main goal of this review is to highlight a new progress of different hybrid materials, nanocomposites (also polymeric) used in lithium-ion (LIBs) and sodium-ion (NIBs) cells, solar cells, supercapacitors, and fuel cells and their electrochemical performance.

Physicochemical properties of raw starches and their impact on electrochemical activity - Biomolecule-based anode material.

Starch is a modern and prospective biodegradable material, which could improve lithium-ion batteries by making them safer and thus increasing the energy density and capacity of the cells. The main aim of this study was to research the influence of the physical and chemical properties of different botanical origin starches on their electrochemical properties. The investigation was carried out by examining the colloid stability of starches in water solution at room temperature, and the size of particles, which gave really good stability results. Moreover, the vibrations and the functional groups structure were described by Fourier Transform Infrared Spectroscopy (FTIR). The surface properties were characterized by determining the specific surface area, pore diameter and volume diameter. The structures of the granules were determined by scanning electron microscope (SEM) measurement. The results of the electrochemical investigations showed good cyclic reversibility and stability. The research was aimed at improving and modifying current lithium-ion cells using biodegradable material as an active anode material, which is connected with the currently well-known "Green Chemistry".

Crystallization of TiO2-MoS2 Hybrid Material under Hydrothermal Treatment and Its Electrochemical Performance.

Hydrothermal crystallization was used to synthesize an advanced hybrid system containing titania and molybdenum disulfide (with a TiO2:MoS2 molar ratio of 1:1). The way in which the conditions of hydrothermal treatment (180 and 200 °C) and thermal treatment (500 °C) affect the physicochemical properties of the products was determined. A physicochemical analysis of the fabricated materials included the determination of the microstructure and morphology (scanning and transmission electron microscopy-SEM and TEM), crystalline structure (X-ray diffraction method-XRD), chemical surface composition (energy dispersive X-ray spectroscopy-EDS) and parameters of the porous structure (low-temperature N2 sorption), as well as the chemical surface concentration (X-ray photoelectron spectroscop-XPS). It is well known that lithium-ion batteries (LIBs) represent a renewable energy source and a type of energy storage device. The increased demand for energy means that new materials with higher energy and power densities continue to be the subject of investigation. The objective of this research was to obtain a new electrode (anode) component characterized by high work efficiency and good electrochemical properties. The synthesized TiO2-MoS2 material exhibited much better electrochemical stability than pure MoS2 (commercial), but with a specific capacity ca. 630 mAh/g at a current density of 100 mA/g.

The Impact of the Vanadium Oxide Addition on the Physicochemical Performance Stability and Intercalation of Lithium Ions of the TiO2-rGO-electrode in Lithium Ion Batteries.

This work determines the effect of the addition of various amounts of vanadium oxide on the work of a cell built from a hybrid VxOy-TiO2-rGO system in a lithium-ion cell. Moreover, a new method based on solvothermal chemistry is proposed for the creation of a new type of composite material combining reduced graphene, vanadium oxide and crystalline anatase. The satisfactory electrochemical properties of VxOy-TiO2-rGO hybrids can be attributed to the perfect matching of the morphology and structure of VxOy-TiO2 and rGO. In addition, it is also responsible for the partial transfer of electrons from rGO to VxOy-TiO2, which increases the synergistic interaction of the VxOy-TiO2-rGO hybrid to the reversible storage of lithium. In addition a full cell was created LiFePO4/VxOy-TiO2-rGO. The cell showed good cyclability while providing a capacity of 120 mAh g-1.

Kinetics and Thermodynamics of Thermal Degradation of Different Starches and Estimation the OH Group and H2O Content on the Surface by TG/DTG-DTA.

The main aim of this study is to estimate the kinetic and thermodynamic parameters of thermal decomposition of starches by the Coats-Redfern method. This procedure is a commonly used thermogravimetric analysis/difference thermal gravimetry/differental thermal analysis (TG/DTG-DTA) kinetic method for single rate form. The study also shows a proposed method for reactive hydroxyl groups content on the starch surface determination, and values were in range of 960.21-1078.76 mg OH per 1 g of starch. Thermal processing revealed the thermophysical properties of biomass for the kinetics of decomposition estimation. Activation energies reached the values in range of approximately 66.5-167 kJ·mol-1. This research also enables the determination of the temperature conditions required for becoming the desired form of material. Therefore, it is necessary to achieve the requested compact porous structure in an activation process, because in the native state, the polymer exhibits limited applications as a result of thermal decomposition, low shear stress, retrogradation, and syneresis, hence the low solubility in organic solvents. Thermodynamic parameters and reactive hydroxyl groups in this article review are innovative and have not yet been found in the literature.

Development of Acidic Imidazolium Ionic Liquids for Activation of Kraft Lignin by Controlled Oxidation: Comprehensive Evaluation and Practical Utility.

A novel, eco-friendly method for the activation of lignin by controlled oxidation was studied. The results obtained for six acidic imidazolium ionic liquids containing the hydrogen sulfate anion were compared. The key goal of this research was to increase the content of carbonyl groups in the lignin structure because these may play the main role in the transport of protons and electrons in active materials for electrochemical applications. By means of a variety of analytical techniques (FTIR, 13 C CP/MAS NMR, and X-ray photoelectron spectroscopy; selected reactions to determine the presence of carbonyl groups; SEM; zeta-potential analysis; thermogravimetric analysis/differential thermogravimetric analysis; and porous structure analysis), it was determined that the product obtained after treatment with 3-cyclohexyloxymethy-1-methylimidazolium hydrogen sulfate had favorable properties, in terms of the target application. Electrochemical tests proved that the obtained materials could be used as anodes in lithium batteries. The results show that the activation of lignin with ionic liquids can increase its capacity and maintain stability.

Functional Hybrid Materials Based on Manganese Dioxide and Lignin Activated by Ionic Liquids and Their Application in the Production of Lithium Ion Batteries.

Kraft lignin (KL) was activated using selected ionic liquids (ILs). The activated form of the biopolymer, due to the presence of carbonyl groups, can be used in electrochemical tests. To increase the application potential of the system in electrochemistry, activated lignin forms were combined with manganese dioxide, and the most important physicochemical and morphological-microstructural properties of the novel, functional hybrid systems were determined using Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), scanning electron microscopy (SEM), zeta potential analysis, thermal stability (TGA/DTG) and porous structure analysis. An investigation was also made of the practical application of the hybrid materials in the production of lithium ion batteries. The capacity of the anode (MnO2/activated lignin), working at a low current regime of 50 mA·g-1, was ca. 610 mAh·g-1, while a current of 1000 mA·g-1 resulted in a capacity of 570 mAh·g-1. Superior cyclic stability and rate capability indicate that this may be a promising electrode material for use in high-performance lithium ion batteries.