ABSTRACT
Despite the intense interest in cellulose nanofibers (CNFs) for biomedical and engineering applications, no research findings about the electrical energy storage of CNF have been reported yet. Here, we present the first electroadsorption effects of an amorphous cellulose nanofiber (ACF) supercapacitor, which can store a large amount of electricity (221 mJm-2, 13.1 Wkg-1). The electric storage can be attributed to the entirely enhanced electroadsorption owing to a quantum-size effect by convexity of 17.9 nm, an offset effect caused by positive polar C6=O6 radicles, and an electrostatic effect by appearance of the localised electrons near the Na ions. The supercapacitor also captures both positive and negative electricity from the atmosphere and in vacuum. The supercapacitor could illuminate a red LED for 1 s after charging it with 2 mA at 10 V. Further gains might be attained by integrating CNF specimens with a nano-electromechanical system (NEMS).
ABSTRACT
In this study, the electric storage effect of AlO6 clusters in amorphous alumina (AAO) supercapacitors was investigated in terms of cluster morphologies under electron-beam irradiation. Based on first-principles density functional calculation, the optimised structure of AlO6 clusters around an O-vacancy is characterised by a large vacant space created by the absence of an O atom and its neighbouring Al atom. The localised electrons present near the two-atomic vacancies induce positive charges on the inside of the insulating oxide surface, ensuring the adsorption of many electrons on the surface. Electron-beam irradiation (adsorption) from 100 to 180 keV causes the lengths of the Al-O bonds of the cluster to shrink, but then return to the original length with decreasing voltage energy, indicating a rocking-chair-type charge-breathing effect accompanied by a volume expansion of approximately 4%. The I-V and I-R characteristics depicted Coulomb blockade for the switching effect of both the negative and positive potentials. The Ragone plot of the AAO supercapacitor is located at capability area of the second cell.
ABSTRACT
The electric capacitance of an amorphous TiO2-x surface increases proportionally to the negative sixth power of the convex diameter d. This occurs because of the van der Waals attraction on the amorphous surface of up to 7 mF/cm2, accompanied by extreme enhanced electron trapping resulting from both the quantum-size effect and an offset effect from positive charges at oxygen-vacancy sites. Here we show that a supercapacitor, constructed with a distributed constant-equipment circuit of large resistance and small capacitance on the amorphous TiO2-x surface, illuminated a red LED for 37 ms after it was charged with 1 mA at 10 V. The fabricated device showed no dielectric breakdown up to 1,100 V. Based on this approach, further advances in the development of amorphous titanium-dioxide supercapacitors might be attained by integrating oxide ribbons with a micro-electro mechanical system.
ABSTRACT
Amorphous perfluoroalkenyl vinyl ether polymer devices can store a remarkably powerful electric charge because their surface contains nanometre-sized cavities that are sensitive to the so-called quantum-size effect. With a work function of approximately 10 eV, the devices show a near-vertical line in the Nyquist diagram and a horizontal line near the -90° phase angle in the Bode diagram. Moreover, they have an integrated effect on the surface area for constant current discharging. This effect can be explained by the distributed constant electric circuit with a parallel assembly of nanometre-sized capacitors on a highly insulating polymer. The device can illuminate a red LED light for 3 ms after charging it with 1 mA at 10 V. Further gains might be attained by integrating polymer sheets with a micro-electro mechanical system.
