3D-printed nanocomposite denture base resin: The effect of incorporating TiO2 nanoparticles on the growth of Candida albicans.

PURPOSE: To develop a biocompatible denture base resin/TiO2 nanocomposite material with antifungal characteristics that is suitable for 3D-printing denture bases. MATERIALS AND METHODS: TiO2 nanoparticles (NPs) with a 0.10, 0.25, 0.50, and 0.75 weight percent (wt.%) were incorporated into a commercially available 3D-printed resin material. The resulting nanocomposite material was analyzed using Lactate dehydrogenase (LDH) and AlamarBlue (AB) assays for biocompatibility testing with human gingival fibroblasts (HGF). The composite material was also tested for its antifungal efficacy against Candida albicans. Fourier transform infrared (FTIR) and Energy Dispersive X-ray Spectroscopy (EDX) mapping were conducted to assess the surface coating and the dispersion of the NPs. RESULTS: LDH and AB assays confirmed the biocompatibility of the material showing cell proliferation at a rate of nearly 100% at day 10, with a cytotoxicity of less than 13% of the cells at day 10. The concentrations of 0.10, 0.25, and 0.50 wt.% caused a significant reduction (p < 0.05) in the number of candida cells attached to the surface of the specimens (p < 0.05), while 0.75 wt.% did not show any significant difference compared to the control (no TiO2 NPs) (p > 0.05). FTIR and EDX analysis confirmed the presence of TiO2 NPs within the nanocomposite material with a homogenous dispersion for 0.10 and 0.25 wt.% groups and an aggregation of the NPs within the material at higher concentrations. CONCLUSION: The addition of TiO2 NPs into 3D-printed denture base resin proved to have an antifungal effect against Candida albicans. The resultant nanocomposite material was a biocompatible material with HGFs and was successfully used for 3D printing.

Virtual and augmented reality in dental education: The good, the bad and the better.

INTRODUCTION: Virtual reality and augmented reality (VR/AR) are becoming established technologies with a wide range of possibilities in various academic fields, including dentistry. The practice of dentistry encompasses a spectrum of skills and knowledge of anatomy, complex technical and clinical skills and sound academic understanding. This review aims to scope the current use of these technologies in dental education, explore their impact on teaching and learning and envisage their potential in this field. MATERIALS AND METHODS: The Cochrane Library, PubMed and EMBASE were searched. Cochrane Handbook was used to conduct this systematic review. Inclusion and exclusion criteria were applied; randomised control trials published in English in the last 10 years (2010-2020) were considered and screened independently by two authors. RESULTS: Fourteen of 524 studies were included and assessed. The majority of articles describing the use of VR/AR focused on an Undergraduate/General Dental Practitioner audience. Its use in Oral and Maxillofacial Surgery, Endodontics and Restorative dentistry was also described. There is evidence of motor skill acquisition using these systems which is comparative to that of traditional methods. CONCLUSION: The use of VR/AR is well established in dental education; most applications relate to undergraduate education as a useful adjunct to dental training. In this article, the breadth of learning in dental education using VR/AR was exploited providing an overview to aid dental education. VR/AR is a useful adjunct to conventional learning in dentistry. However, there are limitations preventing VR/AR widespread use and applications, such as lack of trials, standardisation and accreditation of systems/content.

Biological response of epithelial and connective tissue cells to titanium surfaces with different ranges of roughness: An in-vitro study.

OBJECTIVES: This study aimed to investigate how titanium (Ti) surface with different range roughness created by industrial machining influence the biological response of primary human gingival fibroblasts (HGFB) and keratinocytes (HGKC) in terms of cell proliferation and cytotoxicity. METHODS: Four Ti surfaces of different roughness ranges were investigated: smooth (S: 0.08-0.1 µm), minimally rough (MM: 0.3-0.5 µm), moderately rough (MR: 1.2-1.4 µm) and rough (R: 3.3-3.7 µm). Discs topography and surface roughness were evaluated by scanning electron microscopy (SEM) and non-contact profilometer. Both cell lines were cultured, expanded, and maintained according to their supplier's protocols. Cell proliferation and cytotoxicity were evaluated at days 1, 3, 5, and 10 using cell viability and cytotoxicity colorimetric assays. Data were analysed via two-way ANOVA, one-way ANOVA and Tukey's post hoc test (p = 0.05 for all tests). RESULTS: Both cell lines showed comparable initial proliferation activity of 70-86% for all the investigated roughnesses. HGKC showed better and higher proliferation % with S surface at all time points than all the other investigated surfaces which was significantly higher than MM at day 3 and higher than all the other investigated surfaces at day 5 and 10. On the other hand, HGFB exhibited the best proliferation with both MM and R surfaces with no significant differences from the other two surfaces (S and MR). Different surface roughnesses and exposure times showed significant effect on cell proliferation in both cell lines. Cytotoxicity for both cell lines was generally the highest on day 3, with the following order from highest to lowest: S (19.86%)> R> MR> MM for HGKC and MM (39.48%)> MR> S> R for HGFB. Different exposure times showed a significant effect on cell cytotoxicity in both cell lines and a significant effect of surface roughness in HGFB. SIGNIFICANCE: All investigated roughness levels were sufficiently biologically compatible with cells representative of the major population of the soft tissue surrounding dental implants. However, the S surface was most cytotoxic to HGKC, while the MM surface was most cytotoxic to HGFB cells.

Two Gingival Cell Lines Response to Different Dental Implant Abutment Materials: An In Vitro Study.

Objectives: This study aimed to investigate the response of human gingival fibroblasts (HGFB) and human gingival keratinocytes (HGKC) towards different dental implant abutment materials. Methods: Five materials were investigated: (1) titanium (Ti), (2) titanium nitride (TiN), (3) cobalt-chromium (CoCr), (4) zirconia (ZrO2), and (5) modified polyether ether ketone (m-PEEK). Both cell lines were cultured, expanded, and seeded in accordance with the protocol of their supplier. Cell proliferation and cytotoxicity were evaluated at days 1, 3, 5, and 10 using colourimetric viability and cytotoxicity assays. Data were analysed via two-way ANOVA, one-way ANOVA, and Tukey's post hoc test (p < 0.05 for all tests). Results: There was a statistically significant difference in cell proliferation of HGKC and HGFB cells in contact with different abutment materials at different time points, with no significant interaction between different materials. There was a significant effect on cell proliferation and cytotoxicity with different exposure times (p < 0.0001) for each material. Cell proliferation rates were comparable for both cell lines at the beginning of the study, however, HGFB showed higher proliferation rates for all materials at day 10 with better proliferation activities with ZrO and m-PEEK (40.27%) and (48.38%) respectively. HGKC showed significant interactions (p < 0.0001) in cytotoxicity between different materials. Conclusion: The present in vitro assessment investigated the biocompatibility of different abutment materials with soft tissue cells (HGFB and HGKC). The findings suggest that m-PEEK and TiN are biologically compatible materials with human cells that represent the soft tissue and can be considered as alternative implant abutment materials to Ti and ZrO2, especially when the aesthetic is of concern.

In-Vitro Phenotypic Response of Human Osteoblasts to Different Degrees of Titanium Surface Roughness.

Objectives: This study aimed to investigate human osteoblast (HOB) responses towards different degrees of titanium (Ti) implant surface roughness. Methods: Four degrees of Ti surface roughness were investigated on a micrometer roughness scale: smooth (S: 0.08−0.1 µm), minimally rough (MM: 0.3−0.5 µm), moderately rough (MR: 1.2−1.4 µm), and rough (R: 3.3−3.7 µm). HOB cells were cultured, expanded, and maintained according to the supplier's protocol. Cell proliferation and cytotoxicity were assessed at day 1, 3, 5, and 10 using alamarBlue and lactate dehydrogenase colorimetric assays. Data were analyzed with one-way ANOVA, two-way ANOVA, and Tukey's post hoc test (p = 0.05 for all tests). Results: There was no significant difference in the cell proliferation or cytotoxicity of the HOB cells in contact with the different degrees of Ti surface roughness. There was, however, a significant time effect on cell proliferation (p < 0.0001) with different exposure durations for each roughness degree. Furthermore, a positive correlation (non-significant) between proliferation and cytotoxicity was observed for all investigated degrees of surface roughness. Conclusion: All investigated roughness degrees showed comparable HOB proliferation, with the MR surface presenting the highest percentage, followed by the R, MM, ad S, surfaces, respectively. The S surface showed the highest cytotoxic effect on HOBs; however, it did not reach the cytotoxic level suggested by the ISO for any medical device to be considered cytotoxic.

Human osteoblasts response to different dental implant abutment materials: An in-vitro study.

OBJECTIVES: This study aimed to investigate human osteoblasts (HOB) response towards different dental implant abutment materials. METHODS: Five dental implant abutment materials were investigated: (1) titanium (Ti), (2) titanium coated nitride (TiN), (3) cobalt chromium (CoCr), (4) zirconia (ZrO2), and (5) modified polyether ether ketone (m-PEEK). HOBs were cultured, expanded, and seeded according to the supplier's protocol (PromoCell, UK). Cell proliferation and cytotoxicity were evaluated at days 1, 3, 5, and 10 using Alamar Blue (alamarBlue) and lactate dehydrogenase (LDH) colorimetric assays. Data were analysed via two-way ANOVA, one-way ANOVA and Tukey's post hoc test (significance was determined as p < 0.05 for all tests). RESULTS: All the investigated materials showed high and comparable initial proliferation activities apart from ZrO2 (46.92%), with P% of 79.91%, 68.77%, 73.20%, and 65.46% for Ti, TiN, CoCr, and m-PEEK, respectively. At day 10, all materials exhibited comparable and lower P% than day 1 apart from TiN (70.90%) with P% of 30.22%, 40.64%, 37.27%, and 50.65% for Ti, CoCr, ZrO2, and m-PEEK, respectively. The cytotoxic effect of the investigated materials was generally low throughout the whole experiment. At day 10, the cytotoxicity % was 7.63%, 0.21%, 13.30%, 5.32%, 8.60% for Ti, TiN, CoCr, ZrO2, and m-PEEK. The Two-way ANOVA and Tukey's Multiple Comparison Method highlighted significant material and time effects on cell proliferation and cytotoxicity, and a significant interaction (p < 0.0001) between the tested materials. Notably, TiN and m-PEEK showed improved HOB proliferation activity and cytotoxic levels than the other investigated materials. In addition, a non-significant negative correlation between viability and cytotoxicity was found for all tested materials. Ti (p = 0.07), TiN (p = 0.28), CoCr (p = 0.15), ZrO2 (p = 0.17), and m-PEEK (p = 0.12). SIGNIFICANCE: All the investigated materials showed excellent biocompatibility properties with more promising results for the newly introduced TiN and m-PEEK as alternatives to the traditionally used dental implant and abutment materials.

Clinically applicable artificial intelligence system for dental diagnosis with CBCT.

In this study, a novel AI system based on deep learning methods was evaluated to determine its real-time performance of CBCT imaging diagnosis of anatomical landmarks, pathologies, clinical effectiveness, and safety when used by dentists in a clinical setting. The system consists of 5 modules: ROI-localization-module (segmentation of teeth and jaws), tooth-localization and numeration-module, periodontitis-module, caries-localization-module, and periapical-lesion-localization-module. These modules use CNN based on state-of-the-art architectures. In total, 1346 CBCT scans were used to train the modules. After annotation and model development, the AI system was tested for diagnostic capabilities of the Diagnocat AI system. 24 dentists participated in the clinical evaluation of the system. 30 CBCT scans were examined by two groups of dentists, where one group was aided by Diagnocat and the other was unaided. The results for the overall sensitivity and specificity for aided and unaided groups were calculated as an aggregate of all conditions. The sensitivity values for aided and unaided groups were 0.8537 and 0.7672 while specificity was 0.9672 and 0.9616 respectively. There was a statistically significant difference between the groups (p = 0.032). This study showed that the proposed AI system significantly improved the diagnostic capabilities of dentists.

The impact of wrong-site surgery on dental undergraduate teaching: a survey of UK dental schools.

INTRODUCTION: Patient safety within dental education is paramount. Wrong-site surgery (WSS) tooth extraction is not uncommon and is a significant never event (NE) in dentistry. This study aimed to explore dental schools' undergraduate experience of NEs, safety interventions implemented and the impact on student experience. METHODS: All 16 UK dental schools were surveyed via email. RESULTS: The response rate was 100%. A modified World Health Organization (WHO) checklist was used within institutions (94%) including pre-operative briefings and recording teeth on whiteboards (81%, respectively). Students were directly supervised performing extractions (63%) utilising a 1:4 staff: student ratio. WSS by students was reported in 69% of schools, with student experience being impacted by an increased patient safety focus. DISCUSSION: This study demonstrated an increased utilisation of an adapted WHO checklist. Modification of practices to ensure patient safety was demonstrated at all schools, irrespective of student WSS occurrences. Institutions experiencing student NEs commonly implemented WHO checklists and recording teeth for extraction on whiteboards. Other strategies included direct staff supervision and pre-operative briefings. CONCLUSION: UK dental schools have increased the emphasis on patient safety by the implementation of national healthcare models, for example WHO checklists and pre-operative briefings. These strategies both aim to improve communication and teamwork. Increased levels of staff supervision foster greater quality of teaching; however, this has resulted in reduced student clinical experience. A proposed minimum standard for undergraduate surgery is suggested to ensure safe and competent dental practitioners of the future.

Response of two gingival cell lines to CAD/CAM composite blocks.

OBJECTIVE: This study aimed to investigate the influence of CAD/CAM composite materials on human gingival fibroblasts (HGF) and gingival keratinocytes (HGK). METHODS: Four materials were investigated: two resin-composite blocks (RCB), Grandio Blocs (GR) and Block HC (HC); one polymer-infiltrated ceramic network (PICN) (Enamic, EN); and one conventional resin-composite, Grandioso (GND). HGF and HGK were cultured as per the supplier's protocol (ATCC, UK). Cell proliferation and cytotoxicity were evaluated at 1, 3, 5 and 10 days using LDH and Alamar Blue assays. Indirect immunostaining was used to assess the Caspase-3 activity. Data were analysed via two-way ANOVA, one-way ANOVA and Tukey's post hoc test (α = 0.05 for all tests). RESULTS: There was significant difference in cell proliferation of the HGK and HGF cells in contact with different composite materials but no significant differences in their cytotoxicity. There was a significant effect on cell proliferation and cytotoxicity with different exposure times, for each type of resin-composite. HGF cell proliferation was higher than HGK with almost all investigated materials and at all time points. No Caspase-3 activity was detected in either cell lines. SIGNIFICANCE: HGK proliferation and cytotoxicity appeared to be more influenced by composite materials compared to HGF, demonstrating EN cytotoxic effects in HGK. Different manufacturing techniques of resin-composites (photo curing versus heat/pressure curing) had no significant effect on their biocompatibility.

Regeneration of Corneal Epithelium With Dental Pulp Stem Cells Using a Contact Lens Delivery System.

PURPOSE: The corneal epithelium is sloughed off surface of the eye by the action of blinking and is continually replaced by division and maturation of the limbal stem cells (LSCs). In the case of injury or disease, LSCs can be lost or damaged to a point at which the corneal epithelial layer is no longer maintained. leading to LSC deficiencies (LSCDs). When this occurs, the opaque conjunctiva overgrows the anterior surface of the eye, leading to vision impairment or loss. Dental pulp stem cells (DPSCs) are promising candidates as autologous LSC substitutes. In this study, contact lenses (CLs) are used as a novel medical device to deliver DPSCs onto corneal surface to enhance corneal epithelium regeneration. METHODS: Dental pulp stem cells labeled with green fluorescent Qtracker 525 were seeded onto the pretreated CLs, allowed to adhere, then delivered to debrided human corneas. Expression of KRT3, 12, 13, and 19 was investigated by immunostaining, then standard and confocal microscopy. RESULTS: Dental pulp stem cells were successfully isolated, labeled, and delivered to the corneal surface using CLs. Following removal of CLs, confocal microscopy showed that the DPSCs had migrated onto the cornea. Coexpression of KRT12 and green fluorescent Qtracker 525 confirmed that the DPSCs had transdifferentiated into corneal epithelial progenitors. Delimitation of KRT 19 and green fluorescence provides evidence that Qtracker 525-labeled DPSCs establish a barrier to the invasion of the cornea by conjunctiva. CONCLUSIONS: In this study we show that DPSCs, delivered using CLs, can be used to enhance repair and regeneration of the human corneal epithelium.

Interventions for iatrogenic inferior alveolar and lingual nerve injury.

BACKGROUND: Iatrogenic injury of the inferior alveolar or lingual nerve or both is a known complication of oral and maxillofacial surgery procedures. Injury to these two branches of the mandibular division of the trigeminal nerve may result in altered sensation associated with the ipsilateral lower lip or tongue or both and may include anaesthesia, paraesthesia, dysaesthesia, hyperalgesia, allodynia, hypoaesthesia and hyperaesthesia. Injury to the lingual nerve may also affect taste perception on the affected side of the tongue. The vast majority (approximately 90%) of these injuries are temporary in nature and resolve within eight weeks. However, if the injury persists beyond six months it is deemed to be permanent. Surgical, medical and psychological techniques have been used as a treatment for such injuries, though at present there is no consensus on the preferred intervention, or the timing of the intervention. OBJECTIVES: To evaluate the effects of different interventions and timings of interventions to treat iatrogenic injury of the inferior alveolar or lingual nerves. SEARCH METHODS: We searched the following electronic databases: the Cochrane Oral Health Group's Trial Register (to 9 October 2013), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2013, Issue 9), MEDLINE via OVID (1946 to 9 October 2013) and EMBASE via OVID (1980 to 9 October 2013). No language restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: Randomised controlled trials (RCTs) involving interventions to treat patients with neurosensory defect of the inferior alveolar or lingual nerve or both as a sequela of iatrogenic injury. DATA COLLECTION AND ANALYSIS: We used the standard methodological procedures expected by The Cochrane Collaboration. We performed data extraction and assessment of the risk of bias independently and in duplicate. We contacted authors to clarify the inclusion criteria of the studies. MAIN RESULTS: Two studies assessed as at high risk of bias, reporting data from 26 analysed participants were included in this review. The age range of participants was from 17 to 55 years. Both trials investigated the effectiveness of low-level laser treatment compared to placebo laser therapy on inferior alveolar sensory deficit as a result of iatrogenic injury.Patient-reported altered sensation was partially reported in one study and fully reported in another. Following treatment with laser therapy, there was some evidence of an improvement in the subjective assessment of neurosensory deficit in the lip and chin areas compared to placebo, though the estimates were imprecise: a difference in mean change in neurosensory deficit of the chin of 8.40 cm (95% confidence interval (CI) 3.67 to 13.13) and a difference in mean change in neurosensory deficit of the lip of 21.79 cm (95% CI 5.29 to 38.29). The overall quality of the evidence for this outcome was very low; the outcome data were fully reported in one small study of 13 patients, with differential drop-out in the control group, and patients suffered only partial loss of sensation. No studies reported on the effects of the intervention on the remaining primary outcomes of pain, difficulty eating or speaking or taste. No studies reported on quality of life or adverse events.The overall quality of the evidence was very low as a result of limitations in the conduct and reporting of the studies, indirectness of the evidence and the imprecision of the results. AUTHORS' CONCLUSIONS: There is clearly a need for randomised controlled clinical trials to investigate the effectiveness of surgical, medical and psychological interventions for iatrogenic inferior alveolar and lingual nerve injuries. Primary outcomes of this research should include: patient-focused morbidity measures including altered sensation and pain, pain, quantitative sensory testing and the effects of delayed treatment.