A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2.

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Molecular Characteristics of Water-Insoluble Tin-Porphyrins for Designing the One-Photon-Induced Two-Electron Oxidation of Water in Artificial Photosynthesis.

Faced with the new stage of water oxidation by molecular catalysts (MCs) in artificial photosynthesis to overcome the bottle neck issue, the "Photon-flux density problem of sunlight," a two-electron oxidation process forming H2O2 in place of the conventional four-electron oxidation evolving O2 has attracted much attention. The molecular characteristics of tin(IV)-tetrapyridylporphyrin (SnTPyP), as one of the most promising MCs for the two-electron water oxidation, has been studied in detail. The protolytic equilibria among nine species of SnTPyP, with eight pKa values on the axial ligands' water molecules and peripheral pyridyl nitrogen atoms in both the ground and excited states, have been clarified through the measurements of UV-vis, fluorescence, 1H NMR, and dynamic fluorescence decay behaviour. The oxidation potentials in the Pourbaix diagram and spin densities by DFT calculation of the one-electron oxidized form of each nine species have predicted that the fully deprotonated species ([SnTPyP(O-)2]2-) and the singly deprotonated one ([SnTPyP(OH)(O-)]-) serve as the most favourable MCs for visible light-induced two-electron water oxidation when they are adsorbed on TiO2 for H2 formation or SnO2 for Z-scheme CO2 reduction in the molecular catalyst sensitized system of artificial photosynthesis.

Supramolecular photocatalysts fixed on the inside of the polypyrrole layer in dye sensitized molecular photocathodes: application to photocatalytic CO2 reduction coupled with water oxidation.

The development of systems for photocatalytic CO2 reduction with water as a reductant and solar light as an energy source is one of the most important milestones on the way to artificial photosynthesis. Although such reduction can be performed using dye-sensitized molecular photocathodes comprising metal complexes as redox photosensitizers and catalyst units fixed on a p-type semiconductor electrode, the performance of the corresponding photoelectrochemical cells remains low, e.g., their highest incident photon-to-current conversion efficiency (IPCE) equals 1.2%. Herein, we report a novel dye-sensitized molecular photocathode for photocatalytic CO2 reduction in water featuring a polypyrrole layer, [Ru(diimine)3]2+ as a redox photosensitizer unit, and Ru(diimine)(CO)2Cl2 as the catalyst unit and reveal that the incorporation of the polypyrrole network significantly improves reactivity and durability relative to those of previously reported dye-sensitized molecular photocathodes. The irradiation of the novel photocathode with visible light under low applied bias stably induces the photocatalytic reduction of CO2 to CO and HCOOH with high faradaic efficiency and selectivity (even in aqueous solution), and the highest IPCE is determined as 4.7%. The novel photocathode is coupled with n-type semiconductor photoanodes (CoO x /BiVO4 and RhO x /TaON) to construct full cells that photocatalytically reduce CO2 using water as the reductant upon visible light irradiation as the only energy input at zero bias. The artificial Z-scheme photoelectrochemical cell with the dye-sensitized molecular photocathode achieves the highest energy conversion efficiency of 8.3 × 10-2% under the irradiation of both electrodes with visible light, while a solar to chemical conversion efficiency of 4.2 × 10-2% is achieved for a tandem-type cell using a solar light simulator (AM 1.5, 100 mW cm-2).

Optically Transparent Colloidal Dispersion of Titania Nanoparticles Storable for Longer than One Year Prepared by Sol/Gel Progressive Hydrolysis/Condensation.

The molecular catalyst sensitized system (MCSS), where an excited molecular catalyst adsorbed on a semiconductor such as TiO2 injects electrons to the conduction band of the semiconductor leading to hydrogen evolution/CO2 reduction coupled with an oxidation of water on the molecular catalyst, has been one of the most probable candidates in the approach to artificial photosynthesis. For a full utilization of visible light, however, a serious light scattering of the aqueous suspension of TiO2 in the visible region, which is generally experienced, should be avoided. Here, we report a preparation of optically transparent colloidal dispersion of TiO2 by the sol/gel reaction of TiCl4 through progressive hydrolysis/condensation under the basic condition without any calcination processes. The TiO2 nanoparticles (TiO2(NPs)) obtained were characterized as an amorphous particle (∼10-15 nm) having a microcrystal domain of anatase within several nm by XRD, Raman spectroscopies, XRF, XAFS, TG/DTA, and HRTEM, respectively. The energy-resolved distribution of carrier electron traps in TiO2(NPs) as a fingerprint of TiO2 was characterized through reversed double-beam photo-acoustic spectroscopy to have a close similarity to that of TiO2(ST-01) as well as the observation of carrier traps by transient absorption spectroscopy. Though the powder TiO2(NP) itself was not dispersed well in aqueous solution, the wet TiO2(NPs) as prepared before being dried up provided a completely transparent aqueous dispersion under the acidic condition (1 M HCl). Addition of methanol enabled the colloidal dispersion (TiO2(NPs, MeOH/H2O, 0.1 M HCl)) to keep the optical transparency for longer than 1 year (550 days), which is the first example of TiO2 dispersion storable for such a long period. TiO2(NPs, MeOH/H2O) exhibited a moderate photocatalytic reactivity of H2 evolution with a quantum yield of ∼2.6% upon 365 nm light irradiation. An optically transparent thin film of TiO2(NPs, MeOH/H2O) was also successfully prepared on a glass plate to exhibit an enhanced hydrophilicity upon UV light irradiation.

Promotive Effect of Bicarbonate Ion on Two-Electron Water Oxidation to Form H2 O2 Catalyzed by Aluminum Porphyrins.

Two-electron water oxidation initiated by one-electron oxidation of aluminum porphyrins (AlTMPyP) is an alternative water oxidation to the conventional four-electron pathway and could help to avoid the bottleneck subject of photon-flux density in artificial photosynthesis. Here, a dramatic enhancement of the reactivity by bicarbonate ion in the two-electron water oxidation to form H2 O2 is reported. An addition of sodium carbonate (Na2 CO3 ) controlled both catalytic current and product selectivity of the two-electron water oxidation to enhance the activity of AlTMPyP at pH≈10-11. Controlled potential electrolysis experiments at different concentrations of Na2 CO3 (10-100 mm) showed that peroxide selectivity was improved up to approximately 73 % by the increase of [Na2 CO3 ] added to the system. The promotion of the reaction cycle was induced by an enhanced dynamic capturing of H2 O2 from the hydroperoxy complex of AlTMPyP through an attack of a bicarbonate ion. The detailed electrochemical studies and product selectivity indicated that the bicarbonate ion served as a good cofactor for producing H2 O2 from water. At stronger alkaline conditions (pH 12.5), however, a retardative effect of the addition of Na2 CO3 on the catalytic reactivity was observed.

One Electron-Initiated Two-Electron Oxidation of Water by Aluminum Porphyrins with Earth's Most Abundant Metal.

We report herein a new molecular catalyst for efficient water splitting, aluminum porphyrins (tetra-methylpyridiniumylporphyrinatealuminum: AlTMPyP), containing earth's most abundant metal as the central ion. One-electron oxidation of the aluminum porphyrin initiates the two-electron oxidation of water to form hydrogen peroxide as the primary reaction product with the lowest known overpotential (97 mV). The aluminum-peroxo complex was detected by a cold-spray ionization mass-spectrometry in high-resolution MS (HRMS) mode and the structure of the intermediate species was further confirmed using laser Raman spectroscopy, indicating the hydroperoxy complex of AlTMPyP to be the key intermediate in the reaction. The two-electron oxidation of water to form hydrogen peroxide was essentially quantitative, with a Faradaic efficiency of 99 %. The catalytic reaction was found to be highly efficient, with a turnover frequency up to ∼2×104  s-1 . A reaction mechanism is proposed involving oxygen-oxygen bond formation by the attack of a hydroxide ion on the oxyl-radical-like axial ligand oxygen atom in the one-electron-oxidized form of AlTMPyP(O- )2 , followed by a second electron transfer to the electrode.

Synthesis of water-soluble silicon-porphyrin: protolytic behaviour of axially coordinated hydroxy groups.

A new water-soluble silicon(IV)-tetra(4-carboxyphenyl)porphyrin (SiTCPP) with silicon(iv), the second most abundant element on Earth, in the center of porphyrin was synthesized. Fundamental properties including protolytic behaviour of axially coordinating hydroxy groups, and electrochemical behaviour were characterized. The properties were compared with those of silicon(IV)-tetra(2,4,6-trimethylphenyl)porphyrin (SiTMP) and silicon(IV)-tetra(4-trifluoromethylphenyl)porphyrin (SiTFMPP) and discussed in respect to the electron donating/withdrawing effect of the substituents. Two axially coordinating hydroxy groups of SiTCPP exhibit a four-step protolytic behaviour under the acidic conditions along with a single step protolysis of peripheral carboxyl groups. Though SiTCPP and SiTFMPP did not show any reactivity in the photochemical oxygenation of a substrate with K2PtCl6 as a sacrificial electron acceptor, the first oxidation wave in the electrochemical process of SiTCPP and SiTFMPP showed catalytic behaviour in aqueous acetonitrile solution at any pH condition, in contrast to SiTMP which has only a reversible oxidation wave under neutral and weakly acidic conditions. The criteria for the electrochemical oxidative activation of water and the photooxygenation of the substrate were obtained. The higher oxidation wave of Si-porphyrins than ∼0.86 volt vs. SHE is required for the electrochemical oxidation of water, while suitable protecting groups such as a methyl substituent is a requisite for the photochemical oxygenation with K2PtCl6 as a sacrificial electron acceptor.