Investigations of Structural and Electrical Properties of ALD Films Formed with the Ozone Precursor.

The continuous development of ALD thin films demands ongoing improvements and changes toward fabricating materials with tailored properties that are suitable for different practical applications. Ozone has been recently established as a precursor, with distinct advantages over the alternative oxidizing precursors in the ALDs of advanced dielectric films. This study reports alumina (Al2O3) and hafnia (HfO2) formation using an O3 source and compares the obtained structural and electrical properties. The performed structural examinations of ozone-based materials proved homogenous high-k films with less vacancy levels compared to water-based films. The enhanced structural properties also result in the problematic incorporation of different dopants through the bulk layer. Furthermore, analysis of electrical characteristics of the MIS structures with ALD gate dielectrics demonstrated the improved quality and good insulating properties of ozone-based films. However, further optimization of the ALD technique with ozone is needed as a relatively low relative permittivity characterizes the ultra-thin films.

Biodegradable Zinc Oxide Nanoparticles Doped with Iron as Carriers of Exogenous Iron in the Living Organism.

Iron plays an important role in various crucial processes in the body and its deficiency is considered currently as a serious health problem. Thus, iron supplementation strategies for both humans and animals need to be effective and safe. According to our previous studies, zinc-based nanoparticles provide safe, biodegradable, fast and efficient transport system of orally given substances to the tissues. In the current manuscript we present results of a study aimed at investigation of the ZnO nanoparticle-based Fe supplementation system (average size 100 × 250 nm). Nanostructures were orally (gavage) administered to adult mice. Animals were sacrificed at different time points with collection of blood and internal organs for analyses (tissue iron concentration, hepatic level of hepcidin, blood parameters, liver and spleen levels of ferritin, histopathology). Initial experiment was performed to compare the biological effect of doping type (Fe3+ doping vs. a mixture of Fe3+ and Fe2+). Then, the effect of acute/chronic exposure models was determined. The increase in ferritin, along with improved, crucial hematological parameters and lack of the influence on hepcidin expression indicated the chronic application of Fe3+,2+ doped ZnO nanostructures to be the most effective among tested.

Impact of GaAs(100) surface preparation on EQE of AZO/Al2O3/p-GaAs photovoltaic structures.

In order to effectively utilize the photovoltaic properties of gallium arsenide, its surface/interface needs to be properly prepared. In the experiments described here we examined eight different paths of GaAs surface treatment (cleaning, etching, passivation) which resulted in different external quantum efficiency (EQE) values of the tested photovoltaic (PV) cells. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) examinations were conducted to obtain structural details of the devices. X-ray photoelectron spectroscopy (XPS) with depth profiling was used to examine interface structure and changes in the elemental content and chemical bonds. The photoluminescence (PL) properties and bandgap measurements of the deposited layers were also reported. The highest EQE value was obtained for the samples initially etched with a citric acid-based etchant and, in the last preparation step, either passivated with ammonium sulfide aqueous solution or treated with ammonium hydroxide solution with no final passivation. Subsequent I-V measurements, however, confirmed that from these samples, only the sulfur-passivated ones provided the highest current density. The tested devices were fabricated by using the ALD method.

Surface Modification of PLLA, PTFE and PVDF with Extreme Ultraviolet (EUV) to Enhance Cell Adhesion.

Recently, extreme ultraviolet (EUV) radiation has been increasingly used to modify polymers. Properties such as the extremely short absorption lengths in polymers and the very strong interaction of EUV photons with materials may play a key role in achieving new biomaterials. The purpose of the study was to examine the impact of EUV radiation on cell adhesion to the surface of modified polymers that are widely used in medicine: poly(tetrafluoroethylene) (PTFE), poly (vinylidene fluoride) (PVDF), and poly-L-(lactic acid) (PLLA). After EUV surface modification, which has been performed using a home-made laboratory system, changes in surface wettability, morphology, chemical composition and cell adhesion polymers were analyzed. For each of the three polymers, the EUV radiation differently effects the process of endothelial cell adhesion, dependent of the parameters applied in the modification process. In the case of PVDF and PTFE, higher cell number and cellular coverage were obtained after EUV radiation with oxygen. In the case of PLLA, better results were obtained for EUV modification with nitrogen. For all three polymers tested, significant improvements in endothelial cell adhesion after EUV modification have been demonstrated.

Titanium Dioxide Thin Films Obtained by Atomic Layer Deposition Promotes Osteoblasts' Viability and Differentiation Potential While Inhibiting Osteoclast Activity-Potential Application for Osteoporotic Bone Regeneration.

Atomic layer deposition (ALD) technology has started to attract attention as an efficient method for obtaining bioactive, ultrathin oxide coatings. In this study, using ALD, we have created titanium dioxide (TiO2) layers. The coatings were characterised in terms of physicochemical and biological properties. The chemical composition of coatings, as well as thickness, roughness, wettability, was determined using XPS, XRD, XRR. Cytocompatibillity of ALD TiO2 coatings was accessed applying model of mouse pre-osteoblast cell line MC3T3-E1. The accumulation of transcripts essential for bone metabolism (both mRNA and miRNA) was determined using RT-qPCR. Obtained ALD TiO2 coatings were characterised as amorphous and homogeneous. Cytocompatibility of the layers was expressed by proper morphology and growth pattern of the osteoblasts, as well as their increased viability, proliferative and metabolic activity. Simultaneously, we observed decreased activity of osteoclasts. Obtained coatings promoted expression of Opn, Coll-1, miR-17 and miR-21 in MC3T3-E1 cells. The results are promising in terms of the potential application of TiO2 coatings obtained by ALD in the field of orthopaedics, especially in terms of metabolic- and age-related bone diseases, including osteoporosis.

Application of sonochemically synthesized SnS and SnS2 in the electro-Fenton process: Kinetics and enhanced decolorization.

SnS and SnS2 powders were synthesized with the use of ultrasound. The indirect sonication was applied with ultrasound frequency 40 kHz and acoustic power 38 W/L. Products of syntheses were examined with PXRD, TEM, EDX, XPS, and UV-Vis (the Tauc method) investigations. The resulting microparticles were used for tip coating of copper cathodes. These electrodes were used in the degradation of model azo-dye Metanil Yellow by the electro-Fenton process. The efficiencies of degradation using copper, SnS-coated copper, and SnS2-coated copper cathodes are compared. Kinetics of degradation of Metanil Yellow in the electro-Fenton process with the application of three different cathodes is also investigated. It was found that the degradation follows pseudo-first-order and that SnS-coated copper cathode improves the efficiency of degradation, while SnS2-coated copper cathode decreases the efficiency of degradation.

Local atomic order of the amorphous TaO x thin films in relation to their chemical resistivity.

The experimental and theoretical studies of the local atomic order and chemical binding in tantalum oxide amorphous films are presented. The experimental studies were performed on thin films deposited at the temperature of 100 °C by atomic layer deposition on silicon (100) and glass substrates. Thin films of amorphous tantalum oxide are known to exhibit an extremely large extent of oxygen nonstoichiometry. Performed X-ray absorption and photoelectron studies indicated the oxygen over-stoichiometric composition in the considered films. Surplus oxygen atoms have 1s electron level with binding energy about 1 eV higher than these in reference Ta2O5 oxide. The density functional theory was applied to find the possible location of additional oxygen atoms. Performed calculation indicated that additional atoms may form the dumbbell defects, which accumulate the dangling oxygen bonds in orthorhombic structure and lead to increase of oxygen 1s level binding energy. The presence of this kind of oxygen-oxygen bonding may be responsible for increase of amorphous film chemical resistivity which is very important in many applications.