Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 18 de 18
Filter
1.
Heliyon ; 9(2): e12554, 2023 Feb.
Article in English | MEDLINE | ID: mdl-36816238

ABSTRACT

Objective: Sensorimotor performance is influential in Chinese handwriting, but few studies have examined the efficacy of sensorimotor-based interventions on Chinese handwriting among primary school students with poor handwriting performance. The study aims to evaluate a sensorimotor-based intervention to improve handwriting in the mainstream primary schools. Methods: This study adopted a two-group pretest-posttest design. An 8-session group-based sensorimotor intervention was delivered to school-aged children (mean age = 8.1, 68% male). Group A had 2 sessions every week, while Group B had 4 sessions every week. Analysis of variance with repeated measures was used to test the effects. Results: The intervention had a significant time effect (p < .05) in terms of improving handwriting process (d = 0.33-1.10), manual dexterity (d = 0.57), visual memory (d = 0.70), visual-spatial perception (d = 0.37), and motor and postural skills (d = 0.73). The effect sizes ranged from medium to large. For the handwriting process, time per character had a significant group × time interaction, with post hoc analysis showing that Group A had a significantly large effect (d = 1.89, p < .001) while Group B did not. Conclusions: The group-based sensorimotor intervention programme appeared to show improvements in students with fair skills in writing Chinese characters. It appears that the effect is better if the training sessions are spaced out in one month rather than intensively conducted within two weeks. It might be related to more involvement from parents, and students need more time for practice after the training sessions.

2.
Nanomaterials (Basel) ; 12(15)2022 Aug 04.
Article in English | MEDLINE | ID: mdl-35957107

ABSTRACT

0.9KNbO3-0.1BaTiO3 ceramics, with a bimodal grain size distribution and typical tetragonal perovskite structure at room temperature, were prepared by using an induced abnormal grain growth (IAGG) method at a relatively low sintering temperature. In this bimodal grain size distribution structure, the extra-large grains (~10-50 µm) were evolved from the micron-sized filler powders, and the fine grains (~0.05-0.35 µm) were derived from the sol precursor matrix. The 0.9KNbO3-0.1BaTiO3 ceramics exhibit relaxor-like behavior with a diffused phase transition near room temperature, as confirmed by the presence of the polar nanodomain regions revealed through high resolution transmission electron microscope analyses. A large room-temperature electrocaloric effect (ECE) was observed, with an adiabatic temperature drop (ΔT) of 1.5 K, an isothermal entropy change (ΔS) of 2.48 J·kg-1·K-1, and high ECE strengths of |ΔT/ΔE| = 1.50 × 10-6 K·m·V-1 and ΔS/ΔE = 2.48 × 10-6 J·m·kg-1·K-1·V-1 (directly measured at E = 1.0 MV·m-1). These greatly enhanced ECEs demonstrate that our simple IAGG method is highly appreciated for synthesizing high-performance electrocaloric materials for efficient cooling devices.

3.
Int J Oral Maxillofac Surg ; 51(1): 44-53, 2022 Jan.
Article in English | MEDLINE | ID: mdl-33865661

ABSTRACT

Spatial deviations of the temporomandibular joint (TMJ) after oncological mandibular reconstruction are important to the aesthetic and functional rehabilitation. The aim of this study was to clarify whether and how three dimensionally (3D) printed patient-specific surgical plates, and the preservation of the condyle or ramus, affect spatial deviations of the TMJ. A total of 33 patients who underwent mandibular reconstruction via computer-assisted surgery were included. Regarding absolute deviations, patients in the 3D-printed plate group showed smaller TMJ deviations compared to those in the conventional plate group. There was no difference in absolute deviations of the TMJ regardless of whether the condyle or ramus was preserved. Regarding physiological deviations, the impact on the contralateral TMJ was smaller in the 3D-printed plate group. Patients with both the condyle and ramus removed had significantly higher deviations of the condyle and joint space. In summary, 3D-printed patient-specific surgical plates improved the spatial accuracy of the TMJ. Under physiological conditions, TMJ deviations on the operated side were mainly affected by the preservation of the condyle. Removal of both the condyle and ramus caused more severe spatial interference to the TMJ; this should be further confirmed.


Subject(s)
Mandibular Reconstruction , Surgery, Computer-Assisted , Bone Plates , Esthetics, Dental , Humans , Mandibular Condyle , Temporomandibular Joint
4.
Dalton Trans ; 48(48): 17864-17873, 2019 Dec 28.
Article in English | MEDLINE | ID: mdl-31777897

ABSTRACT

Perovskite dielectric materials for capacitors have received wide attention in recent years because of their fast charge/discharge rates and high power densities. In this work, lead-free relaxor ferroelectric ceramics of (1 -x)[(Bi0.55Na0.45)0.94Ba0.06]0.98La0.02TiO3-xAgNbO3 were synthesized by a conventional sintering method. All ceramics are situated at the morphotropic phase boundary (MPB) of rhombohedral and tetragonal phases, suggesting that a small amount of AgNbO3 (abbreviated as AN) doping does not affect this phase-coexistence structure. The added AN not only improves the dielectric breakdown strength (DBS) from 84.11 kV cm-1 (x = 0) to 137.89 kV cm-1 (x = 0.01), but also broadens the phase transition peak and enhances the relaxation behavior of ceramics. Moreover, when x = 0.01, the ceramic demonstrates a high saturation polarization (Ps) of 25.54 µC cm-2 and a low remanent polarization (Pr) of 0.65 µC cm-2 at an electric field of 130 kV cm-1. More importantly, an optimal energy storage density (Ws) of 1.697 J cm-3 and energy efficiency (η) of 82.3% are simultaneously achieved in the BNBLT-0.01AN ceramic with excellent thermal stability (∼25-175 °C) and frequency stability (∼10-80 Hz).

5.
Epidemiol Psychiatr Sci ; 29: e29, 2019 Apr 05.
Article in English | MEDLINE | ID: mdl-30947763

ABSTRACT

AIMS: The second Singapore Mental Health Study (SMHS) - a nationwide, cross-sectional, epidemiological survey - was initiated in 2016 with the intent of tracking the state of mental health of the general population in Singapore. The study employed the same methodology as the first survey initiated in 2010. The SMHS 2016 aimed to (i) establish the 12-month and lifetime prevalence and correlates of major depressive disorder (MDD), dysthymia, bipolar disorder, generalised anxiety disorder (GAD), obsessive compulsive disorder (OCD) and alcohol use disorder (AUD) (which included alcohol abuse and dependence) and (ii) compare the prevalence of these disorders with reference to data from the SMHS 2010. METHODS: Door-to-door household surveys were conducted with adult Singapore residents aged 18 years and above from 2016 to 2018 (n = 6126) which yielded a response rate of 69.0%. The subjects were randomly selected using a disproportionate stratified sampling method and assessed using World Health Organization Composite International Diagnostic Interview version 3.0 (WHO-CIDI 3.0). The diagnoses of lifetime and 12-month selected mental disorders including MDD, dysthymia, bipolar disorder, GAD, OCD, and AUD (alcohol abuse and alcohol dependence), were based on the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV) criteria. RESULTS: The lifetime prevalence of at least one mood, anxiety or alcohol use disorder was 13.9% in the adult population. MDD had the highest lifetime prevalence (6.3%) followed by alcohol abuse (4.1%). The 12-month prevalence of any DSM-IV mental disorders was 6.5%. OCD had the highest 12-month prevalence (2.9%) followed by MDD (2.3%). Lifetime and 12-month prevalence of mental disorders assessed in SMHS 2016 (13.8% and 6.4%) was significantly higher than that in SMHS 2010 (12.0% and 4.4%). A significant increase was observed in the prevalence of lifetime GAD (0.9% to 1.6%) and alcohol abuse (3.1% to 4.1%). The 12-month prevalence of GAD (0.8% vs. 0.4%) and OCD (2.9% vs. 1.1%) was significantly higher in SMHS 2016 as compared to SMHS 2010. CONCLUSIONS: The high prevalence of OCD and the increase across the two surveys needs to be tackled at a population level both in terms of creating awareness of the disorder and the need for early treatment. Youth emerge as a vulnerable group who are more likely to be associated with mental disorders and thus targeted interventions in this group with a focus on youth friendly and accessible care centres may lead to earlier detection and treatment of mental disorders.


Subject(s)
Mental Disorders/epidemiology , Adolescent , Adult , Aged , Cross-Sectional Studies , Female , Humans , Male , Mental Health , Middle Aged , Prevalence , Singapore/epidemiology , Young Adult
6.
Phys Chem Chem Phys ; 21(14): 7567-7575, 2019 Apr 03.
Article in English | MEDLINE | ID: mdl-30899929

ABSTRACT

A facile strategy of color switching has been developed through reversibly multicolored photoluminescence modulation in dual rare-earth element modified 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 (BNT6BT-Tb/Eu-x) relaxor ferroelectrics via the application of in situ electric fields. By virtue of the chemical and charge disorder induced by the trivalent rare earth ions, more dynamic and weakly correlated polar nanoregions are formed, which facilitate a reversible transition between the randomly oriented polar nanoregions and unstable ordered ferroelectric domains under an electric field. The electroceramics thus become more ergodic, exhibiting giant and reversible electric field-induced strain as well as structural symmetry changes around the luminescent centers and the BNT6BT-Tb/Eu-0.04 sample reveals the highest ergodicity degree. Accordingly, the overall emission color can be modulated reversibly between orange and green by purely physical stimuli (an electric field). The design of the color modulation elucidated in this work should inspire similar research expanded to other soft ferroelectrics for optical tuning and displays at ambient temperature. This should also be helpful for the realization of regulating the physical coupling (photoluminescence color switching-ergodic relaxor ferroelectrics) in multifunctional inorganic materials.

8.
ACS Appl Mater Interfaces ; 9(39): 34042-34049, 2017 Oct 04.
Article in English | MEDLINE | ID: mdl-28901135

ABSTRACT

Ferroelectric oxides with luminescent ions hold great promise in future optoelectronic devices because of their unique photoluminescence and inherent ferroelectric properties. Intriguingly, the photoluminescence performance of ferroelectric ceramics could be modulated by an external electric field. However, researchers face a current challenge of the diminutive extent and degree of reversibility of the field-driven modification that hinder their use in room-temperature practical applications. Within the scope of current contribution in rare-earth-doped bismuth sodium titanate relaxors, the most important information to be noted is the shifting of the depolarization temperature toward room temperature and the resulting considerable enhancement in ergodicity, as evidenced by the dielectric properties, polarization, and strain hysteresis, as well as the in situ Raman/X-ray diffraction studies. After the introduction of 1 mol % Eu, the induced composition and charge disorders disrupt the original long-range ferroelectric macrodomains into randomly dynamic and weakly correlated polar nanoregions, which facilitates a reversible transformation between polar nanoregions and unstable ferroelectric state under an electric field, engendering a large strain. By virtue of this, both the extent and degree of reversibility of photoluminescence modulation are enhanced (∼60%) considerably, and room-temperature in situ tunable photoluminescence response is then achieved under electric field. These should be helpful for the realization of regulating the physical couplings (photoluminescent-ferroelectrics) in multifunctional inorganic ferroelectrics with a high ergodic state by reversibly tuning the structural symmetry.

9.
Epidemiol Psychiatr Sci ; 26(4): 371-382, 2017 08.
Article in English | MEDLINE | ID: mdl-27018715

ABSTRACT

AIMS: The current study aimed to: (i) describe the extent of overall stigma as well as the differences in stigma towards people with alcohol abuse, dementia, depression, schizophrenia and obsessive compulsive disorder, as well as (ii) establish the dimensions of stigma and examine its correlates, in the general population of Singapore, using a vignette approach. METHODS: Data for the current study came from a larger nation-wide cross-sectional study of mental health literacy conducted in Singapore. The study population comprised Singapore Residents (Singapore Citizens and Permanent Residents) aged 18-65 years who were living in Singapore at the time of the survey. All respondents were administered the Personal and Perceived scales of the Depression Stigma scale and the Social Distance scale to measure personal stigma and social distance, respectively. Weighted mean and standard error of the mean were calculated for continuous variables, and frequencies and percentages for categorical variables. Exploratory structural equation modelling and confirmatory factor analysis were used to establish the dimensions of stigma. Multivariable linear regressions were conducted to examine factors associated with each of the stigma scale scores. RESULTS: The mean age of the respondents was 40.9 years and gender was equally represented (50.9% were males). The findings from the factor analysis revealed that personal stigma formed two distinct dimensions comprising 'weak-not-sick' and 'dangerous/unpredictable' while social distance stigma items loaded strongly into a single factor. Those of Malay and Indian ethnicity, lower education, lower income status and those who were administered the depression and alcohol abuse vignette were significantly associated with higher weak-not-sick scores. Those of Indian ethnicity, 6 years of education and below, lower income status and those who were administered the alcohol abuse vignette were significantly associated with higher dangerous/unpredictable scores. Those administered the alcohol abuse vignette were associated with higher social distance scores. CONCLUSION: This population-wide study found significant stigma towards people with mental illness and identified specific groups who have more stigmatising attitudes. The study also found that having a friend or family member with similar problems was associated with having lower personal as well as social distance stigma. There is a need for well-planned and culturally relevant anti-stigma campaigns in this population that take into consideration the findings of this study.


Subject(s)
Ethnicity/statistics & numerical data , Health Knowledge, Attitudes, Practice , Mental Disorders/psychology , Psychological Distance , Social Stigma , Stereotyping , Adolescent , Adult , Aged , Alcohol-Related Disorders/ethnology , Alcohol-Related Disorders/psychology , Cross-Sectional Studies , Culture , Dementia/ethnology , Dementia/psychology , Depression/ethnology , Depression/psychology , Ethnicity/psychology , Female , Humans , Male , Mental Disorders/ethnology , Middle Aged , Obsessive-Compulsive Disorder/ethnology , Obsessive-Compulsive Disorder/psychology , Psychiatric Status Rating Scales , Schizophrenia/ethnology , Singapore/epidemiology , Surveys and Questionnaires , Young Adult
10.
Sci Rep ; 6: 28677, 2016 06 24.
Article in English | MEDLINE | ID: mdl-27339815

ABSTRACT

Luminescent materials with dynamic photoluminescence activity have aroused special interest because of their potential widespread applications. One proposed approach of directly and reversibly modulating the photoluminescence emissions is by means of introducing an external electric field in an in-situ and real-time way, which has only been focused on thin films. In this work, we demonstrate that real-time electric field-induced photoluminescence modulation can be realized in a bulk Ba0.85Ca0.15Ti0.90Zr0.10O3 ferroelectric ceramic doped with 0.2 mol% Pr(3+), owing to its remarkable polarization reversal and phase evolution near the morphotropic phase boundary. Along with in-situ X-ray diffraction analysis, our results reveal that an applied electric field induces not only typical polarization switching and minor crystal deformation, but also tetragonal-to-rhombohedral phase transformation of the ceramic. The electric field-induced phase transformation is irreversible and engenders dominant effect on photoluminescence emissions as a result of an increase in structural symmetry. After it is completed in a few cycles of electric field, the photoluminescence emissions become governed mainly by the polarization switching, and thus vary reversibly with the modulating electric field. Our results open a promising avenue towards the realization of bulk ceramic-based tunable photoluminescence activity with high repeatability, flexible controllability, and environmental-friendly chemical process.

11.
Mar Pollut Bull ; 63(5-12): 86-90, 2011.
Article in English | MEDLINE | ID: mdl-21592532

ABSTRACT

Hepatic lipidosis is a non-specific biomarker of effect from pollution exposure in fish. Fatty liver is often misdiagnosed or overlooked in histological assessments due to the decreasing application of specific fat procedures and stains. For example, ethanol dehydration in standard paraffin processing removes lipids, leaving vacuoles of which the precise nature is unknown. Lipids can be identified using osmium post-fixation in semi-thin resin sections or transmission electron microscopy. However, both are expensive and technically demanding procedures, often not available for routine environmental risk assessment and monitoring programs. The current emphasis to reduce and refine animal toxicity testing, requires refinement of the suite of histopathological techniques currently available to maximize information gained from using fish for toxicity testing and as bio-indicators of environmental quality. This investigation has successfully modified an osmium post-fixation technique to conserve lipids in paraffin-embedded tissues using medaka (Oryzias latipes) eleutheroembryos and eggs (embryos) as lipid rich models.


Subject(s)
Embryo, Nonmammalian/metabolism , Lipid Metabolism , Liver/metabolism , Osmium/chemistry , Ovum/metabolism , Paraffin Embedding/methods , Animals , Embryo, Nonmammalian/pathology , Liver/pathology , Models, Biological , Oryzias
12.
Rev Sci Instrum ; 81(6): 065102, 2010 Jun.
Article in English | MEDLINE | ID: mdl-20590264

ABSTRACT

Self-focused acoustic ejectors using the Fresnel zone plate (FZP) have been developed for ejecting viscous liquids, without nozzle, in the drop-on-demand mode. The FZP is composed of a lead zirconate titanate piezoelectric plate patterned with a series of annular electrodes, with the unelectroded region of the plate removed. Our results show that the acoustic waves are effectively self-focused by constructive interference in glycerin (with a viscosity of 1400 mPa s), giving small focal points with a high pressure. Due to the high attenuation, the wave pressure decreases significantly with the distance from the FZP. Nevertheless, the pressure at the focal points 2.5 and 6.5 mm from the FZP is high enough to eject glycerin droplets in the drop-on-demand mode. Driven by a simple wave train comprising a series of sinusoidal voltages with an amplitude of 35 V, a frequency of 4.28 MHz, and a duration of 2 ms, the ejector can eject fine glycerin droplets with a diameter of 0.4 mm at a repetition frequency of 120 Hz in a downward direction. Droplets of other viscous liquids, such as the prepolymer of an epoxy with a viscosity of 2000 mPa s, can also be ejected in the drop-on-demand mode under similar conditions.

13.
Rev Sci Instrum ; 80(7): 075110, 2009 Jul.
Article in English | MEDLINE | ID: mdl-19655984

ABSTRACT

A piezoelectric dispenser has been fabricated based on the idea of a piezoelectric-metal-cavity (PMC) actuator. The PMC actuator consists of a metal ring sandwiched between two identical piezoelectric unimorphs. The radial contraction of the piezoelectric ceramic is converted into a flextensional motion of the unimorph, causing a large flexural displacement in the center part of the actuator. With the PMC actuator as a fluid chamber, the large flexural actuation can be used to produce the displacement needed to eject fluid. By applying an appropriate voltage to the piezoelectric unimorphs, a drop-on-demand ejection of ink or water can be achieved. The efficiency of fluid ejection can be enhanced after installing a valve in the fluid chamber. With the simple PMC structure, the dispenser can be operated with a low driving voltage of 12-15 V.


Subject(s)
Electronics/instrumentation , Electric Impedance , Electricity
14.
Biotechnol Appl Biochem ; 46(Pt 4): 191-6, 2007 Apr.
Article in English | MEDLINE | ID: mdl-17014425

ABSTRACT

The present study evaluates the use of hyperosmotic stress and a biotic elicitor YE (yeast elicitor; polysaccharide fraction of yeast extract) to stimulate diterpenoid tanshinone production in hairy-root culture of Salvia miltiorrhiza Bunge (Lamiaceae). Sorbitol was applied as an osmoticum at various concentrations (30-100 g/l) to the hairy-root culture in MS (Murashige and Skoog) medium [Murashige and Skoog (1962) Physiol. Plant. 15, 473-497] containing 30 g/l sucrose, and it increased the TT (total tanshinone) content of roots most dramatically at 50-70 g/l (medium osmolality 410-500 mmol/kg; 1 mol/kg approximately 1 osmol/kg), to 4.5-fold of that in the control. The hairy roots showed strong tolerance to hyperosmotic stress, retaining a stable or higher dry weight of roots at osmolality up to 500 mmol/kg. Most remarkably, the combined use of sorbitol (50 g/l) and YE (100 mg/l) increased the TT content 10-fold (1481.6 versus 146.4 microg/g dry root) and the volumetric tanshinone yield 9-fold (16.3 versus 1.77 mg/l) compared with the control. The results suggest that the combined use of hyperosmotic stress and a biotic elicitor can effectively enhance secondary metabolite production in hairy-root cultures.


Subject(s)
Biotechnology/methods , Phenanthrenes/metabolism , Salvia miltiorrhiza/metabolism , Yeasts/chemistry , Abietanes , Catalase/metabolism , Cell Extracts/pharmacology , Drugs, Chinese Herbal/metabolism , Osmotic Pressure , Plant Roots/drug effects , Plant Roots/metabolism , Salvia miltiorrhiza/drug effects , Sorbitol/pharmacology , Superoxide Dismutase/metabolism
15.
Rev Sci Instrum ; 78(12): 125103, 2007 Dec.
Article in English | MEDLINE | ID: mdl-18163745

ABSTRACT

In this study, a modified disk-shaped multiple-output piezoelectric transformer operated at the fundamental radial vibration mode has been presented. A derived equivalent circuit for the multioutput piezoelectric transformer was used to analyze the performance. Two piezoelectric transformers, a symmetrically electroded piezoelectric transformer with dual outputs and an asymmetrically electroded piezoelectric transformer with triple outputs, were fabricated with lead zirconate titanate piezoelectric ceramics. The characteristics of the two piezoelectric transformers were investigated experimentally. The piezoelectric transformer with multiple outputs has potential to be used in power supply units and other electronic circuits.

16.
Mar Pollut Bull ; 51(8-12): 830-7, 2005.
Article in English | MEDLINE | ID: mdl-16291193

ABSTRACT

Intertidal harpacticoid copepods are commonly used in eco-toxicity tests worldwide. They predominately live in mid-high shore rock pools and often experience a wide range of temperature and salinity fluctuation. Most eco-toxicity tests are conducted at fixed temperature and salinity and thus the influence of these environmental factors on chemical toxicity is largely unknown. This study investigated the combined effect of temperature and salinity on the acute toxicity of the copepod Tigriopus japonicus against two common biocides, copper (Cu) and tributyltin (TBT) using a 2 x 3 x 4 factorial design (i.e. two temperatures: 25 and 35 degrees C; three salinities: 15.0 per thousand, 34.5 per thousand and 45.0 per thousand; three levels of the biocide plus a control). Copper sulphate and tributyltin chloride were used as the test chemicals while distilled water and acetone were utilised as solvents for Cu and TBT respectively. 96 h-LC50s of Cu and TBT were 1024 and 0.149 microg l(-1) respectively (at 25 degrees C; 34.5 per thousand) and, based on these results, nominal biocide concentrations of LC0 (i.e. control), LC30, LC50 and LC70 were employed. Analysis of Covariance using 'concentration' as the covariate and both 'temperature' and 'salinity' as fixed factors, showed a significant interaction between temperature and salinity effects for Cu, mortality increasing with temperature but decreasing with elevated salinity. A similar result was revealed for TBT. Both temperature and salinity are, therefore, important factors affecting the results of acute eco-toxicity tests using these marine copepods. We recommend that such eco-toxicity tests should be conducted at a range of environmentally realistic temperature/salinity regimes, as this will enhance the sensitivity of the test and improve the safety margin in line with the precautionary principle.


Subject(s)
Copepoda/drug effects , Copper/toxicity , Sodium Chloride/analysis , Temperature , Toxicity Tests/methods , Trialkyltin Compounds/toxicity , Water Pollutants, Chemical/toxicity , Analysis of Variance , Animals , Dose-Response Relationship, Drug , Seawater/chemistry
18.
Article in English | MEDLINE | ID: mdl-18238463

ABSTRACT

A new procedure for preparing lead zirconate titanate (PZT)/poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) 1-3 composites with both phases piezoelectrically active is described. Sintered PZT rods are inserted into a prepoled copolymer matrix, and the composite is repoled under a lower electric field. Using this new procedure, the dipoles in the two phases are aligned in either the same or opposite directions. Composite disks, of 12.7-cm diameter and 0.33- to 0.60-mm thicknesses, have been fabricated with PZT rods of 0.8 or 1 mm diameter distributed in a square pattern with 3 mm center-to-center separation. The ceramic volume contents of the composite disks are 3.6 and 5.6%, respectively. The resonance characteristics of the composite disks consist of the resonance modes of the two constituent phases, but they are dominated by the coupled longitudinal thickness mode (H-mode) of the PZT rods. The coupled radial mode (L-mode) resonance of the PZT rods is significant only for thin disks. The observed resonance frequencies of the H- and L-modes agree well with the values calculated from the coupling theory. The thickness mode resonance of the copolymer matrix (T-mode) is present but hardly observable in thick disks. The composite disks have been fabricated into transducers with air-backing and with no front face matching layer, and their performance characteristics have been evaluated in water. The transmitting and receiving voltage responses of a PZT/P(VDF-TrFE) composite transducer are better than those of a PZT/epoxy composite transducer. The transmitting and receiving voltage responses are improved when the PZT rods and copolymer matrix are poled in opposite directions, especially when the resonance frequencies of the H- and T-modes are approximately equal. When the phases are poled in the same direction and the resonance peaks associated with the Hand T-modes just overlap, the bandwidth is improved. Using 0.33-mm thick composite disks, a transducer can be produced with three operating frequencies by poling the constituent phases in the same direction, or with two operating frequencies at equal efficiency by poling the constituent phases in opposite directions. The PZT/P(VDF-TrFE) 1-3 composite transducer, especially the one with multiple operating frequencies, should be very promising in the applications of medical ultrasonic imaging.

SELECTION OF CITATIONS
SEARCH DETAIL
...