ABSTRACT
The process of handling and bonding copper (Cu) and graphene inevitably creates defects. To use graphene/Cu composites as electronic devices with new physical properties, it is essential to evaluate the effect of such defects. Since graphene is an ultrathin anisotropic material having a hexagonal structure, an evaluation of graphene/Cu composites containing defects was conducted taking into account the inherent structural characteristics. The purpose of this study is to evaluate defects that may occur in the manufacturing process and to present a usable basic method for the stable design research and development of copper/graphene composites essential for commercialization of copper/graphene composites. In the future, when performing analytical calculations on various copper/graphene composites and defect shapes in addition to the defect conditions presented in this paper, it is considered that it can be used as a useful method considering defects that occur during application to products of desired thickness and size. Herein, density functional theory was used to evaluate the behavior of graphene/Cu composites containing defects. The density of states (DOS) values were also calculated. The analysis was implemented using three kinds of models comprising defect-free graphene and two- and four-layered graphene/Cu composites containing defects. DOS and Fermi energy levels were used to gage the effect of defects on electrical properties.
ABSTRACT
This study analyzed the mechanical and fracture behavior of graphene/copper (Cu) composites with different Cu thicknesses by using molecular dynamics (MD) and representative volume element (RVE) analysis. Three graphene/Cu composite analytical models were classified as 4.8, 9.8, and 14.3 nm according to Cu thicknesses. Using MD analysis, zigzag-, armchair-, and z (thickness)-direction tensile analyses were performed for each model to analyze the effect of Cu thickness variation on graphene/Cu composite strength and delamination fracture. In the RVE analysis, the mechanical characteristics of the interface between graphene and Cu were evaluated by setting the volume fraction to 1.39, 2.04, and 4.16% of the graphene/Cu composite model, classified according to the Cu thickness. From their obtained results, whether the graphene bond is maintained has the greatest effect on the strength of graphene/Cu composites, regardless of the Cu thickness. Additionally, graphene/Cu composites are more vulnerable to armchair direction tensile forces with fracture strengths of 14.7, 8.9, and 8.2 GPa depending on the Cu thickness. The results of this study will contribute to the development of guidelines and performance evaluation standards for graphene/Cu composites.
ABSTRACT
This paper presents a low-profile log-periodic meandered dipole array (LPMDA) antenna with wideband and high gain characteristics. The antenna consists of 14 dipole elements. For compactness, a meander line structure is applied to each dipole element to reduce its physical length. As a result, a compact and wideband LPMDA antenna is realized, exhibiting a wide impedance bandwidth of 1.04-5.22 GHz (ratio bandwidth of 5.02:1) for | S 11| < -10 dB. To enhance the antenna gain performance while maintaining the wideband behavior, the LPMDA antenna is integrated with a new design of an artificial magnetic conductor (AMC) structure. The designed AMC is realized by combining three AMC structures of different sizes to form a cascaded multi-section AMC structure, of which its overall operating bandwidth can continuously cover the entire impedance bandwidth of the LPMDA antenna. The proposed AMC-backed LPMDA antenna is experimentally verified and its measured -10 dB reflection bandwidth is found to be in the range of 0.84-5.15 GHz (6.13:1). At the main beam direction within the operating frequency bandwidth, the gain of the proposed AMC-backed LPMDA antenna ranges from 7.15-11.43 dBi, which is approximately 4 dBi higher than that of an LPMDA antenna without an AMC. Moreover, the proposed antenna has a low profile of only 0.138 λ L. ( λ L is the free-space wavelength at the lowest operating frequency).
ABSTRACT
Superior nanomaterials have been developed and applied to many fields, and improved characteristic of nanomaterials have been studied. Measurement of the mechanical properties for nanomaterials is important to ensure the reliability and predict the service life times of products containing nanomaterials. However, it is challenging to measure the mechanical properties of nanomaterials due to their very small dimensions. Moreover, macro-scale measurement systems are not suitable for use with nanomaterials. Therefore, various methods have been developed and used to in an effort to measure the mechanical properties of nanomaterials. This paper presents a review of various evaluation systems and the measurement methods which are used to determine the mechanical properties of carbon nanotube (CNT) and carbon nanofiber (CNF), representatively. In addition, we measured the tensile strength and elastic modulus of the CNT and CNF in the scanning electron microscope (SEM) installed the nano-manipulator and the force sensor and this measurement system and results would be introduced in detail.
ABSTRACT
Carbon nanofibers (CNFs) are good candidates for nano-system applications because they have the excellent mechanical and the electrical properties. The mechanical and electrical properties of a single CNF were measured. A tensile test and a measurement of the electrical resistance of CNFs during elongation were performed inside a scanning electron microscope. We confirmed that the CNFs used in this experiment consisted of a polycrystalline structure and an amorphous phase by a result of Raman. Additionally, we observed that the crystal structure in nanofibers exhibits brittle fracture behavior and the amorphous phase make them relatively ductile. The elastic moduli of the CNFs were 9.57 to 13.6 GPa in the elastic section. The electrical resistance of the CNFs exhibited unusual behavior during elongation. The electrical resistance of the CNFs exhibited stable resistance increase like as the tensile results in the initial region. But the electrical resistance exhibited generally irregular increase after initial region because of the polycrystalline structure and amorphous phase. The strain sensitivity of the CNFs exhibited a much lower value.
ABSTRACT
Iron-catalyzed spin-capable multi-walled carbon nanotubes (MWCNTs) were grown on a SiO2 wafer by chemical vapor deposition, which was carried out at 780 degrees C using C2H2 and H2 gases. We fabricated a flexible transparent film using the spun MWCNTs. The MWCNT sheets were produced by being continuously pulled out from well-aligned MWCNTs grown on a substrate. The MWCNT sheet films were manufactured by simply carrying out direct coating on a flexible film or glass. The thickness of the sheet film decreased remarkably when alcohol was sprayed on the surface of the sheet. The alcohol spraying increased the transmittance and decreased the electrical resistance of the MWCNT sheet films. The sheets obtained after alcohol spraying had a resistance of -699 omega and a transmittance of 81%-85%. The MWCNT sheet films were heated by applying direct current. The transparent heaters showed a rapid thermal response and uniform distribution of temperature. In addition, we tested the field emission of the sheet films. The sheet films showed a turn-on voltage of -1.45 V/microm during field emission.
ABSTRACT
The bending and tensile tests of the ZnO nanorods were carried out by controlling a force sensor and a nano-manipulator inside a scanning electron microscope (SEM). The force sensor was mounted on the nano-manipulator, was controlled with the nano-manipulate. The load response during the mechanical test for the ZnO nanorod was obtained by using the force sensor which is formed as a cantilever. The elastic modulus of the ZnO nanorods after the tensile and bending tests were calculated and compared. The elastic modulus of ZnO nanorods was depended on a size and an aspect ratio of the ZnO nanorods. The difference of the elastic modulus of ZnO nanorods was obtained with a difference of test methods performed along crystal facets direction of the ZnO nanorods. The average elastic modulus calculated after the tensile test was approximately 57.15 GPa. In case of the bending test, the average elastic modulus was approximately 29.37 GPa.
