Surface Energy-Driven Preferential Grain Growth of Metal Halide Perovskites: Effects of Nanoimprint Lithography Beyond Direct Patterning.

Hybrid organic-inorganic lead halide perovskites have attracted much attention in the field of optoelectronic devices because of their desirable properties such as high crystallinity, smooth morphology, and well-oriented grains. Recently, it was shown that thermal nanoimprint lithography (NIL) is an effective method not only to directly pattern but also to improve the morphology, crystallinity, and crystallographic orientations of annealed perovskite films. However, the underlining mechanisms behind the positive effects of NIL on perovskite material properties have not been understood. In this work, we study the kinetics of perovskite grain growth with surface energy calculations by first-principles density functional theory (DFT) and reveal that the surface energy-driven preferential grain growth during NIL, which involves multiplex processes of restricted grain growth in the surface-normal direction, abnormal grain growth, crystallographic reorientation, and grain boundary migration, is the enabler of the material quality enhancement. Moreover, we develop an optimized NIL process and prove its effectiveness by employing it in a perovskite light-emitting electrochemical cell (PeLEC) architecture, in which we observe a fourfold enhancement of maximum current efficiency and twofold enhancement of luminance compared to a PeLEC without NIL, reaching a maximum current efficiency of 0.07598 cd/A at 3.5 V and luminance of 1084 cd/m2 at 4 V.

Remote heteroepitaxy of GaN microrod heterostructures for deformable light-emitting diodes and wafer recycle.

There have been rapidly increasing demands for flexible lighting apparatus, and micrometer-scale light-emitting diodes (LEDs) are regarded as one of the promising lighting sources for deformable device applications. Herein, we demonstrate a method of creating a deformable LED, based on remote heteroepitaxy of GaN microrod (MR) p-n junction arrays on c-Al2O3 wafer across graphene. The use of graphene allows the transfer of MR LED arrays onto a copper plate, and spatially separate MR arrays offer ideal device geometry suitable for deformable LED in various shapes without serious device performance degradation. Moreover, remote heteroepitaxy also allows the wafer to be reused, allowing reproducible production of MR LEDs using a single substrate without noticeable device degradation. The remote heteroepitaxial relation is determined by high-resolution scanning transmission electron microscopy, and the density functional theory simulations clarify how the remote heteroepitaxy is made possible through graphene.

Delayed Photoluminescence and Modified Blinking Statistics in Alumina-Encapsulated Zero-Dimensional Inorganic Perovskite Nanocrystals.

We demonstrate enhancement of the photoluminescence (PL) properties of individual zero-dimensional (0D) Cs4PbBr6 perovskite nanocrystals (PNCs) upon encapsulation by alumina using an appropriately modified atomic layer deposition method. In addition to the increased PL intensity and improved long-term stability of encapsulated PNCs, our single-particle studies reveal substantial changes in the PL blinking statistics and the persistent appearance of the long-lived, "delayed" PL components. The blinking patterns exhibit a modification from the fast switching between fluorescent ON and OFF states found in bare PNCs to a behavior with longer ON states and more isolated OFF states in alumina-encapsulated PNCs. Controlled exposure of 0D nanocrystals to moisture suggests that the observed PL lifetime changes may be related to water-induced "reservoir" states that allow for longer-lived charge storage with subsequent back-feeding into the emissive states. Viable encapsulation of PNCs with metal oxides that can preserve and even enhance their PL properties can be utilized in the fabrication of extended structures on their basis for optoelectronic and photonic applications.

Combination effect of saturated or superheated steam and lactic acid on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium and Listeria monocytogenes on cantaloupe surfaces.

The purpose of this study was to evaluate the effectiveness of the combination treatment of lactic acid immersion and saturated or superheated steam (SHS) on inactivation of foodborne pathogens on cantaloupes. Saturated steam (SS) treatments were performed at 100 °C, while SHS treatments were delivered at either 150 or 200 °C. Escherichia coli O157:H7, Salmonella Typhimurium and Listeria monocytogenes-inoculated cantaloupes were exposed to 2% lactic acid or sterile distilled water for 1 min followed by a maximum of 20 s of SS or SHS. Populations of each of the three pathogens on cantaloupes were reduced to under the detection limit (1.0 log CFU/cm2) after the combination treatment of 2% lactic acid and 200 °C steam for 20 s. To compare the effect of the lactic acid treatment method, we conducted spray application with 2% lactic acid combined with SS or SHS treatment; however, no significant log reduction differences were found between immersion and spraying techniques. After combination treatment of cantaloupes for 20 s, color and maximum load values (a characteristic of texture) were not significantly different from those of untreated controls. The results of this study suggest that the combination treatment of lactic acid and SHS can be used as an antimicrobial intervention for cantaloupes without inducing quality deterioration.

Comparison of the effect of saturated and superheated steam on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium and Listeria monocytogenes on cantaloupe and watermelon surfaces.

The purpose of this study was evaluation of the effectiveness of superheated steam (SHS) on inactivation of foodborne pathogens on cantaloupes and watermelons. Saturated steam (SS) treatment was performed at 100 °C and that of SHS at 150 and 200 °C. Escherichia coli O157:H7, Salmonella Typhimurium and Listeria monocytogenes-inoculated cantaloupes and watermelons were exposed for a maximum of 30 s and 10 s, respectively. Populations of the three pathogens on cantaloupes and watermelons were reduced by more than 5 log after 200 °C steam treatment for 30 s and 10 s, respectively. After SHS treatment of cantaloupes and watermelons for each maximum treatment time, color and maximum load values were not significantly different from those of untreated controls. By using a noncontact 3D surface profiler, we found that surface characteristics, especially surface roughness, is the main reason for differences in microbial inactivation between cantaloupes and watermelons. The results of this study suggest that SHS treatment can be used as an antimicrobial intervention for cantaloupes and watermelons without inducing quality deterioration.

Thermo-mechanically responsive crystalline organic cantilever.

We report thermo-mechanically responsive and thermochromic behavior in the single crystalline organic semiconductor butoxyphenyl N-substituted naphthalene diimide (BNDI). We show that initially monoclinic single crystals of BNDI undergo a single-crystal to single-crystal transition to a triclinic phase. This transition accompanies large changes in the crystal packing, a visible decrease in crystal size, reversible thermochromic behavior, and motion including bending, jumping, and splitting. We have shown that by fixing single crystals to a surface, we can harness the energy of the phase transition to create a single crystal cantilever capable of lifting weights with masses nigh two orders of magnitude heavier than the single crystal itself.