Sterically Stabilized Diblock Copolymer Nanoparticles Enable Convenient Preparation of Suspension Concentrates Comprising Various Agrochemical Actives.

It is well known that sterically stabilized diblock copolymer nanoparticles can be readily prepared using polymerization-induced self-assembly. Recently, we reported that such nanoparticles can be employed as a dispersant to prepare micron-sized particles of a widely used fungicide (azoxystrobin) via ball milling. In the present study, we examine the effect of varying the nature of the steric stabilizer block, the mean nanoparticle diameter, and the glass transition temperature (Tg) of the core-forming block on the particle size and colloidal stability of such azoxystrobin microparticles. In addition, the effect of crosslinking the nanoparticle cores is also investigated. Laser diffraction studies indicated the formation of azoxystrobin microparticles of approximately 2 µm diameter after milling for between 15 and 30 min at 6000 rpm. Diblock copolymer nanoparticles comprising a non-ionic steric stabilizer, rather than a cationic or anionic steric stabilizer, were determined to be more effective dispersants. Furthermore, nanoparticles of up to 51 nm diameter enabled efficient milling and ensured overall suspension concentrate stability. Moreover, crosslinking the nanoparticle cores and adjusting the Tg of the core-forming block had little effect on the milling of azoxystrobin. Finally, we show that this versatile approach is also applicable to five other organic crystalline agrochemicals, namely pinoxaden, cyproconazole, difenoconazole, isopyrazam and tebuconazole. TEM studies confirmed the adsorption of sterically stabilized nanoparticles at the surface of such agrochemical microparticles. The nanoparticles are characterized using TEM, DLS, aqueous electrophoresis and 1H NMR spectroscopy, while the final aqueous' suspension concentrates comprising microparticles of the above six agrochemical actives are characterized using optical microscopy, laser diffraction and electron microscopy.

Block Copolymer Nanoparticles are Effective Dispersants for Micrometer-Sized Organic Crystalline Particles.

Well-defined sterically stabilized diblock copolymer nanoparticles of 29 nm diameter are prepared by RAFT aqueous emulsion polymerization of methyl methacrylate using a dithiobenzoate-capped poly(glycerol monomethacrylate) precursor. These nanoparticles are evaluated as a dispersant for the preparation of organic crystalline microparticles via ball milling. This is exemplified for azoxystrobin, which is a broad-spectrum fungicide that is widely used to protect various food crops. Laser diffraction and optical microscopy studies indicate the formation of azoxystrobin microparticles of approximately 2 µm diameter after ball milling for 10 min at 400 rpm. Nanoparticle adsorption at the surface of these azoxystrobin microparticles is confirmed by electron microscopy studies. The extent of nanoparticle adsorption on the azoxystrobin microparticles can be quantified using a supernatant assay based on solution densitometry. This technique indicates an adsorbed amount of approximately 5.5 mg m-2, which is sufficient to significantly reduce the negative zeta potential exhibited by azoxystrobin. Moreover, this adsorbed amount appears to be essentially independent of the nature of the core-forming block, with similar data being obtained for both poly(methyl methacrylate)- and poly(2,2,2-trifluoroethyl methacrylate)-based nanoparticles. Finally, X-ray photoelectron spectroscopy studies confirm attenuation of the underlying N1s signal arising from the azoxystrobin microparticles by the former adsorbed nanoparticles, suggesting a fractional surface coverage of approximately 0.24. This value is consistent with a theoretical surface coverage of 0.25 calculated from the adsorption isotherm data. Overall, this study suggests that sterically stabilized diblock copolymer nanoparticles may offer a useful alternative approach to traditional soluble copolymer dispersants for the preparation of suspension concentrates affecting the context of agrochemical applications.

Bottom-up device fabrication via the seeded growth of polymer-based nanowires.

The bottom-up assembly of nanoelectronic devices from molecular building blocks is a target of widespread interest. Herein we demonstrate an in situ seeded growth approach to produce a nanowire-based electrical device. This exploits the chemisorption of block terpolymer-based seed fibres with a thiophene-functionalised corona onto metal electrodes as the initial step. We then use these surface-bound seeds to initiate the growth of well-defined one-dimensional fibre-like micelles via the seeded growth method known as "Living crystallisation-driven self-assembly'' and demonstrate that they are capable of spanning an interelectrode gap. Finally, a chemical oxidation step was used to transform the nanofibres into nanowires to generate a two-terminal device. This seeded growth approach of growing well-defined circuit elements provides a useful new design tool for bottom-up device fabrication.

Poly(3-alkylthiophene)- block-poly(3-alkylselenophene)s: Conjugated Diblock Co-polymers with Atypical Self-Assembly Behavior.

Understanding self-assembly behavior and resulting morphologies in block co-polymer films is an essential aspect of chemistry and materials science. Although the self-assembly of amorphous coil-coil block co-polymers is relatively well understood, that of semicrystalline block co-polymers where each block has distinct crystallization properties remains unclear. Here, we report a detailed study to elucidate the rich self-assembly behavior of conjugated thiophene-selenophene (P3AT- b-P3AS) block co-polymers. Using a combination of microscopy and synchrotron-based X-ray techniques, we show that three different film morphologies, denoted as lamellae, co-crystallized fibers, and patchy fibers, arise from the self-assembly of these block co-polymers over a relatively narrow range of overall degrees of polymerization (30 < N < 90). Crystallization-driven phase separation occurs at a very low N (<35), and lamellar films are formed. Conversely, at medium N (50-60) and high N (>80), the thiophene and selenophene blocks co-crystallize into nanofibers, where medium N leads to much more mixing than high N. The overall tendency for phase separation in these systems follows rather different trends than phase separation in amorphous polymers in that we observe the greatest degree of phase separation at the lowest N. Finally, we demonstrate how each morphology influences transport properties in organic thin-film transistors comprised of these conjugated polymers.

Chemically Addressable Perovskite Nanocrystals for Light-Emitting Applications.

Whereas organic-inorganic hybrid perovskite nanocrystals (PNCs) have remarkable potential in the development of optoelectronic materials, their relatively poor chemical and colloidal stability undermines their performance in optoelectronic devices. Herein, this issue is addressed by passivating PNCs with a class of chemically addressable ligands. The robust ligands effectively protect the PNC surfaces, enhance PNC solution processability, and can be chemically addressed by thermally induced crosslinking or radical-induced polymerization. This thin polymer shield further enhances the photoluminescence quantum yields by removing surface trap states. Crosslinked methylammonium lead bromide (MAPbBr3 ) PNCs are applied as active materials to build light-emitting diodes that have low turn-on voltages and achieve a record luminance of over 7000 cd m-2 , around threefold better than previous reported MA-based PNC devices. These results indicate the great potential of this ligand passivation approach for long lifespan, highly efficient PNC light emitters.

Three-Dimensional Arylene Diimide Frameworks for Highly Stable Lithium Ion Batteries.

Lithium ion batteries are the best commercial technology to satisfy the energy storage needs of current and emerging applications. However, the use of transition-metal-based cathodes precludes them from being low-cost, sustainable, and environmentally benign, even with recycling programs in place. In this study, we report a highly stable organic material that can be used in place of the transition-metal cathodes. By creating a three-dimensional framework based on triptycene and perylene diimide (PDI), a cathode can be constructed that mitigates stability issues that organic electrodes typically suffer from. When a lithium ion battery is assembled using the PDI-triptycene framework (PDI-Tc) cathode, a capacity of 75.9 mAh g-1 (78.7% of the theoretical value) is obtained. Importantly, the battery retains a near perfect Coulombic efficiency and >80% of its capacity after cycling 500 times, which is the best value reported to date for PDI-based materials.

Patchy Nanofibers from the Thin Film Self-Assembly of a Conjugated Diblock Copolymer.

An unexpected morphology comprising patchy nanofibers can be accessed from the self-assembly of an all-conjugated, polyselenophene-block-polythiophene copolymer. This morphology consists of very small (<10 nm), polythiophene- and polyselenophene-rich domains and is unprecedented for both conjugated polymers and diblock copolymers in general. We propose that the patchy morphology occurs from the enhanced miscibility of the blocks arising from the longer alkyl chains in comparison to similar block copolymers with shorter alkyl chains, which fully phase separate, as well as the difference in rigidity between the polythiophene and polyselenophene blocks. This work demonstrates a facile way to tune the self-assembly behavior of conjugated block copolymers by modification of the side chain substituents.