Compositional Optimization of Sputtered WO3/MoO3 Films for High Coloration Efficiency.

Thin films of mixed MoO3 and WO3 were obtained using reactive magnetron sputtering onto ITO-covered glass, and the optimal composition was determined for the best electrochromic (EC) properties. A combinatorial material synthesis approach was applied throughout the deposition experiments, and the samples represented the full composition range of the binary MoO3/WO3 system. The electrochromic characteristics of the mixed oxide films were determined with simultaneous measurement of layer transmittance and applied electric current through the using organic propylene carbonate electrolyte cells in a conventional three-electrode configuration. Coloration efficiency data evaluated from the primary data plotted against the composition displayed a characteristic maximum at around 60% MoO3. Our combinatorial approach allows the localization of the maximum at 5% accuracy.

Investigation of Electrochromic, Combinatorial TiO2-SnO2 Mixed Layers by Spectroscopic Ellipsometry Using Different Optical Models.

We determined the optimal composition of reactive magnetron-sputtered mixed layers of Titanium oxide and Tin oxide (TiO2-SnO2) for electrochromic purposes. We determined and mapped the composition and optical parameters using Spectroscopic Ellipsometry (SE). Ti and Sn targets were put separately from each other, and the Si-wafers on a glass substrate (30 cm × 30 cm) were moved under the two separated targets (Ti and Sn) in a reactive Argon-Oxygen (Ar-O2) gas mixture. Different optical models, such as the Bruggeman Effective Medium Approximation (BEMA) or the 2-Tauc-Lorentz multiple oscillator model (2T-L), were used to obtain the thickness and composition maps of the sample. Scanning Electron Microscopy (SEM) with Energy-Dispersive X-ray Spectroscopy (EDS) has been used to check the SE results. The performance of diverse optical models has been compared. We show that in the case of molecular-level mixed layers, 2T-L is better than EMA. The electrochromic effectiveness (the change of light absorption for the same electric charge) of mixed metal oxides (TiO2-SnO2) that are deposited by reactive sputtering has been mapped too.

Investigation of Combinatorial WO3-MoO3 Mixed Layers by Spectroscopic Ellipsometry Using Different Optical Models.

Reactive (Ar-O2 plasma) magnetron sputtered WO3-MoO3 (nanometer scaled) mixed layers were investigated and mapped by Spectroscopic Ellipsometry (SE). The W- and Mo-targets were placed separately, and 30 × 30 cm glass substrates were slowly moved under the two (W and Mo) separated targets. We used different (oscillator- and Effective Medium Approximation, EMA-based) optical models to obtain the thickness and composition maps of the sample layer relatively quickly and in a cost-effective and contactless way. In addition, we used Rutherford Backscattering Spectrometry to check the SE results. Herein, we compare the "goodness" of different optical models depending upon the sample preparation conditions, for instance, the speed and cycle number of the substrate motion. Finally, we can choose between appropriate optical models (2-Tauc-Lorentz oscillator model vs. the Bruggeman Effective Medium Approximation, BEMA) depending on the process parameters. If one has more than one "molecular layer" in the "sublayers", BEMA can be used. If one has an atomic mixture, the multiple oscillator model is better (more precise) for this type of layer structure.

Flagellin-based electrochemical sensing layer for arsenic detection in water.

Regular monitoring of arsenic concentrations in water sources is essential due to the severe health effects. Our goal was to develop a rapidly responding, sensitive and stable sensing layer for the detection of arsenic. We have designed flagellin-based arsenic binding proteins capable of forming stable filament structures with high surface binding site densities. The D3 domain of Salmonella typhimurium flagellin was replaced with an arsenic-binding peptide motif of different bacterial ArsR transcriptional repressor factors. We have shown that the fusion proteins developed retain their polymerization ability and have thermal stability similar to that of wild-type filament. The strong arsenic binding capacity of the monomeric proteins was confirmed by isothermal titration calorimetry (ITC), and dissociation constants (Kd) of a few hundred nM were obtained for all three variants. As-binding fibers were immobilized on the surface of a gold electrode and used as a working electrode in cyclic voltammetry (CV) experiments to detect inorganic arsenic near the maximum allowable concentration (MAC) level. Based on these results, it can be concluded that the stable arsenic-binding flagellin variant can be used as a rapidly responding, sensitive, but simple sensing layer in a field device for the MAC-level detection of arsenic in natural waters.

Sensing Layer for Ni Detection in Water Created by Immobilization of Bioengineered Flagellar Nanotubes on Gold Surfaces.

The environmental monitoring of Ni is targeted at a threshold limit value of 0.34 µM, as set by the World Health Organization. This sensitivity target can usually only be met by time-consuming and expensive laboratory measurements. There is a need for inexpensive, field-applicable methods, even if they are only used for signaling the necessity of a more accurate laboratory investigation. In this work, bioengineered, protein-based sensing layers were developed for Ni detection in water. Two bacterial Ni-binding flagellin variants were fabricated using genetic engineering, and their applicability as Ni-sensitive biochip coatings was tested. Nanotubes of mutant flagellins were built by in vitro polymerization. A large surface density of the nanotubes on the sensor surface was achieved by covalent immobilization chemistry based on a dithiobis(succimidyl propionate) cross-linking method. The formation and density of the sensing layer was monitored and verified by spectroscopic ellipsometry and atomic force microscopy. Cyclic voltammetry (CV) measurements revealed a Ni sensitivity below 1 µM. It was also shown that, even after two months of storage, the used sensors can be regenerated and reused by rinsing in a 10 mM solution of ethylenediaminetetraacetic acid at room temperature.