Microwave-Mediated Synthesis of Lead-Free Cesium Titanium Bromide Double Perovskite: A Sustainable Approach.

Theoretical studies have identified cesium titanium bromide (Cs2TiBr6), a vacancy-ordered double perovskite, as a promising lead-free and earth-abundant candidate to replace Pb-based perovskites in photovoltaics. Our research is focused on overcoming the limitations associated with the current Cs2TiBr6 syntheses, which often involve high-vacuum and high-temperature evaporation techniques, high-energy milling, or intricate multistep solution processes conducted under an inert atmosphere, constraints that hinder industrial scalability. This study presents a straightforward, low-energy, and scalable solution procedure using microwave radiation to induce the formation of highly crystalline Cs2TiBr6 in a polar solvent. This methodology, where the choice of the solvent plays a crucial role, not only reduces the energy costs associated with perovskite production but also imparts exceptional stability to the resulting solid, in comparison with previous reports. This is a critical prerequisite for any technological advancement. The low-defective material demonstrates unprecedented structural stability under various stimuli such as moisture, oxygen, elevated temperatures (over 130 °C), and continuous exposure to white light illumination. In summary, our study represents an important step forward in the efficient and cost-effective synthesis of Cs2TiBr6, offering a compelling solution for the development of eco-friendly, earth-abundant Pb-free perovskite materials.

Thermoluminescent glow curve of Gd1-xRExAlO3 (RE=Dy or Pr) beta irradiated phosphors.

Phosphors composed of Gd1-xRExAlO3 (0≤x ≤ 5 RE = Dy or Pr) stoichiometries were synthesized using the reverse coprecipitation pathway. The thermoluminescent responses of all phosphors were studied under beta radiation exposure. Doping the gadolinium aluminate host improved the thermoluminescent response of the phosphors, with the phosphors composed of Gd0.99Dy0.01AlO3 and Gd0.95Pr0.05AlO3 being the most sensitive. The Dy3+ ions produced a higher improvement of the thermoluminescent signal than the Pr3+ ions. Additionally, a proportional relationship between the similarity of the atomic numbers of the dopant and replaced ions and the sensitivity to thermoluminescence was confirmed. Besides, a slight shift of the thermoluminescent peaks toward lower temperatures was detected for doped phosphors. In the repeatability tests applied to the phosphor composed of Gd0.99Dy0.01AlO3, an anomalous increase in sensitization was observed. The observed sensitization was associated with the formation of electron trap clusters resulting from the continuous exposure to beta radiation. Furthermore, another sensitization phenomenon was detected in the phosphor with Gd0.95Pr0.05AlO3 stoichiometry when it was heated at low temperatures. The aforementioned striking behavior was related to quasi-continuous distributions of electron traps and the tunneling effect. In regard to linearity, the phosphor composed of Gd0.99Dy0.01AlO3 exhibited a linear response with the dose across the entire range of beta doses. However, the response of the Gd0.95Pr0.05AlO3 phosphor lost linearity beyond 26.4 Gy of beta dose. The results obtained through the use of the Tmax-Tstop method and deconvolutions suggested an enhancement in the efficiency of the thermoluminescent mechanisms due to the incorporation of activators.

Thermoluminescence analysis of beta particle irradiated Gd1-xEuxAlO3 phosphors.

The suitable choice of an activator and host combination is essential for synthesizing very sensitive thermoluminescence phosphors. In addition, conspicuous synthesis variables must be optimized to achieve the maximal response. The research presented herein shows that the most recommendable conditions to improve the thermoluminescence response of beta irradiated Gd1-xEuxAlO3 phosphors were: x = 0.02 for europium stoichiometry and 1500 °C for the calcination temperature. The glow curve recorded for the most sensitive phosphor was partially erased by photo-bleaching, and thus, should yield optically stimulated luminescence.

Relative Populations and IR Spectra of Cu38 Cluster at Finite Temperature Based on DFT and Statistical Thermodynamics Calculations.

The relative populations of Cu38 isomers depend to a great extent on the temperature. Density functional theory and nanothermodynamics can be combined to compute the geometrical optimization of isomers and their spectroscopic properties in an approximate manner. In this article, we investigate entropy-driven isomer distributions of Cu38 clusters and the effect of temperature on their IR spectra. An extensive, systematic global search is performed on the potential and free energy surfaces of Cu38 using a two-stage strategy to identify the lowest-energy structure and its low-energy neighbors. The effects of temperature on the populations and IR spectra are considered via Boltzmann factors. The computed IR spectrum of each isomer is multiplied by its corresponding Boltzmann weight at finite temperature. Then, they are summed together to produce a final temperature-dependent, Boltzmann-weighted spectrum. Our results show that the disordered structure dominates at high temperatures and the overall Boltzmann-weighted spectrum is composed of a mixture of spectra from several individual isomers.

Imaging and SERS Study of the Au Nanoparticles Interaction with HPV and Carcinogenic Cervical Tissues.

In this work, gold NPs were prepared by the Turkevich method, and their interaction with HPV and cancerous cervical tissues were studied by scanning electron microscopy, energy-dispersive x-ray spectroscopy, confocal and multiphoton microscopy and SERS. The SEM images confirmed the presence and localization of the gold NPs inside of the two kinds of tissues. The light absorption of the gold NPs was at 520 nm. However, it was possible to obtain two-photon imaging (red emission region) of the gold NPs inside of the tissue, exciting the samples at 900 nm, observing the morphology of the tissues. The infrared absorption was probably due to the aggregation of gold NPs inside the tissues. Therefore, through the interaction of gold nanoparticles with the HPV and cancerous cervical tissues, a surface enhanced Raman spectroscopy (SERS) was obtained. As preliminary studies, having an average of 1000 Raman spectra per tissue, SERS signals showed changes between the HPV-infected and the carcinogenic tissues; these spectral signatures occurred mainly in the DNA bands, potentially offering a tool for the rapid screening of cancer.

Discrimination of radiosensitive and radioresistant murine lymphoma cells by Raman spectroscopy and SERS.

Intrinsic radiosensitivity is a biological parameter known to influence the response to radiation therapy in cancer treatment. In this study, Raman spectroscopy and surface enhanced Raman spectroscopy (SERS) were successfully used in conjunction with principal component analysis (PCA) to discriminate between radioresistant (LY-R) and radiosensitive (LY-S) murine lymphoma sublines (L5178Y). PCA results for normal Raman analysis showed a differentiation between the radioresistant and radiosensitive cell lines based on their specific spectral fingerprint. In the case of SERS with gold nanoparticles (AuNPs), greater spectral enhancements were observed in the radioresistant subline in comparison to its radiosensitive counterpart, suggesting that each subline displays different interaction with AuNPs. Our results indicate that spectroscopic and chemometric techniques could be used as complementary tools for the prediction of intrinsic radiosensitivity of lymphoma samples.

A Turn-On Luminescence Method for Phosphate Determination Based on Fast Green-Functionalized ZrO2:Yb,Er@ZrO2 Core@Shell Upconversion Nanoparticles.

The development of practical and sensitive tools for detecting phosphate deficiency could facilitate engineering approaches to enhance crop yield and quality in phosphate-stressed environments, reducing the misuse of nonrenewable fertilizers and their consequent ecological impact. Herein, a 975 nm-activated method based on ZrO2:Yb,Er@ZrO2 core@shell upconversion nanoparticles is presented for rapid visualization and determination of the phosphate ions in aqueous solutions and extracts. At optimized thickness, the nondoped ZrO2 shell not only enhances the emission of the ZrO2:Yb,Er but also provides an active surface for the intense interaction with the phosphate group, allowing a "label-free" determination that avoids the use of additional phosphate-recognizing elements like ligands or antibodies. According to the experimental evidence, the optical output of the ZrO2:Yb,Er@ZrO2 nanoparticles specifically matches with the absorption spectrum of the fast green alimentary dye (FG) electrostatically attached to the nanoparticle surface, activating the Förster resonance energy transfer (FRET) and thereby the upconversion luminescence quenching. Upon addition of the phosphate ions and the covalent interaction with the ZrO2:Yb,Er@ZrO2-FG nanocomplex, the FG is gradually removed, displaying a fast and reproducible "turn-on" luminescence which allows measurements in a few minutes. This rapid response is due to the stronger coordination between the ZrO2 shell and the phosphate compared to the FG molecules (-31.97 and -5.99 eV, respectively). The detection method was then effectively modulated in a 20-1000 nM linear response range without interfering effects of commonly coexisting ions, achieving a detection limit up to 15 times lower than that obtained with the conventionally used colorimetric methods.

Print metallic nanoparticles on a fiber probe for 1064-nm surface-enhanced Raman scattering.

This Letter presents 1064-nm surface-enhanced Raman scattering (SERS) on an optical fiber probe, or 1064-nm-SERS-on-fiber. Metallic nanoparticles are printed on an optical fiber probe by using optothermal surface bubbles under ambient conditions. An optothermal surface bubble is a laser-induced micro-sized bubble that is formed on a solid-liquid interface. The SERS activity of the optical fiber probe for 1064-nm Raman microscopy is tested with rhodamine 6G in aqueous solution. The 1064-nm-SERS-on-fiber can reduce the fluorescent background noise that commonly exists in other Raman systems. It can also compensate for the decreased Raman signal due to the use of an infrared Raman laser. The 1064-nm-SERS-on-fiber will find potential applications in low-background-noise biosensing and endoscopy.

Controlling trapping states on selective theranostic core@shell (NaYF4:Yb,Tm@TiO2-ZrO2) nanocomplexes for enhanced NIR-activated photodynamic therapy against breast cancer cells.

Photodynamic and immune therapies are innovative medical strategies against cancer, and their integration with upconversion nanoparticles (UCNPs) can improve the diagnosis and treatment of the disease. The UCNPs convert the deep penetrating near-infrared (NIR) light into higher energy emissions, allowing the imaging and detection of malignant cells and the simultaneous energy transfer for activation of the photosensitizers. In this work, the UCNPs were coated with a photocatalytic TiO2/ZrO2 shell and an increase of oxygen defects (VO) was observed as a result of the partial substitution of Ti4+ by Zr4+ ions in the crystalline lattice of TiO2. Such defects act as trapping states improving charge separation and then reducing the recombination rate of the electron-hole pairs (e-/h+) generated upon resonant energy transfer from the donor (UCNPs) to acceptors (shell). The overall results are the enhancement of both ROS production and the emission band centered at 801 nm which is useful for tracking cells at the deep tissue level. However, an excess of those defects produces deleterious effects on both processes as a result of charge migration. The specificity against HER2 positive breast cancer was provided by bioconjugation with the monoclonal antibody trastuzumab. After administration of the synthesized NaYF4:Yb,Tm@TiO2/ZrO2-trastuzumab theranostic nanocomplex doped with an optimal ZrO2 molar concentration (25%) and subsequent exposure to 975 nm light (0.71 W cm-2) during 5 minutes, HER2-positive SKBr3 breast cancer cells were suppressed with 88% drop of the cell viability, 28% higher than UCNPs decorated with a pure TiO2 shell.

An immunoconjugated up-conversion nanocomplex for selective imaging and photodynamic therapy against HER2-positive breast cancer.

Photodynamic therapy represents a very attractive therapeutic tool considered to be effective, minimally invasive and minimally toxic. However, conventional photodynamic therapy actually has two main constraints: the limited penetration depth of visible light needed for its activation, and the lack of selectivity. Considering this, this work reports the synthesis and evaluation of a novel nanoconjugate for imaging and selective photodynamic therapy against HER2-positive breast cancer, a particularly aggressive form of the disease. It was demonstrated that upon 975 nm near infrared light exposure, the red emission of the NaYF4:Yb,Er up-conversion nanoparticles (UCNPs) can be used for optical imaging and simultaneously represent the source for the excitation of a covalently bound zinc tetracarboxyphenoxy phthalocyanine (ZnPc), a photosensitizer that in turn transfers energy to ground state molecular oxygen to produce cytotoxic singlet oxygen. The specificity of our nanoconjugates was achieved by immunoconjugation with Trastuzumab (Tras), a specific monoclonal antibody for selective detection and treatment of HER2-overexpressing malignant breast cancer cells. Selective tracking of SKBR-3 HER2-positive cells was verified by confocal microscopy analysis, and the photodynamic therapy effect was considerably improved when Trastuzumab was incorporated into the nanoconjugate, the UCNPs-ZnPc-Tras being practically inert in the absence of infrared light exposure but reducing the HER2-positive cell viability up to 21% upon 5 min of the irradiation. This theranostic nanoconjugate represents a valuable alternative for HER2-positive breast cancer imaging and selective photodynamic therapy.

Improving the Optoelectronic Properties of Mesoporous TiO2 by Cobalt Doping for High-Performance Hysteresis-free Perovskite Solar Cells.

We for the first time report the incorporation of cobalt into a mesoporous TiO2 electrode for application in perovskite solar cells (PSCs). The Co-doped PSC exhibits excellent optoelectronic properties; we explain the improvements by passivation of electronic trap or sub-band-gap states arising due to the oxygen vacancies in pristine TiO2, enabling faster electron transport and collection. A simple postannealing treatment is used to prepare the cobalt-doped mesoporous electrode; UV-visible spectroscopy, X-ray photoemission spectroscopy, space charge-limited current, photoluminescence, and electrochemical impedance measurements confirm the incorporation of cobalt, enhanced conductivity, and the passivation effect induced in the TiO2. An optimized doping concentration of 0.3 mol % results in the maximum power conversion efficiency of 18.16%, 21.7% higher than that of a similar cell with an undoped TiO2 electrode. Also, the device shows negligible hysteresis and higher stability, retaining 80.54% of the initial efficiency after 200 h.

Operating Mechanisms of Mesoscopic Perovskite Solar Cells through Impedance Spectroscopy and J-V Modeling.

The performance of perovskite solar cell (PSC) is highly sensitive to deposition conditions, the substrate, humidity, and the efficiency of solvent extraction. However, the physical mechanism involved in the observed changes of efficiency with different deposition conditions has not been elucidated yet. In this work, PSCs were fabricated by the antisolvent deposition (AD) and recently proposed air-extraction antisolvent (AAD) process. Impedance analysis and J-V curve fitting were used to analyze the photogeneration, charge transportation, recombination, and leakage properties of PSCs. It can be elucidated that the improvement in morphology of perovskite film promoted by AAD method leads to increase in light absorption, reduction in recombination sites, and interstitial defects, thus enhancing the short-circuit current density, open-circuit voltage, and fill factor. This study will open up doors for further improvement of device and help in understanding its physical mechanism and its relation to the deposition methods.

SERS-active Au/SiO2 clouds in powder for rapid ex vivo breast adenocarcinoma diagnosis.

In the present work, we report a dry-based application technique of Au/SiO2 clouds in powder for rapid ex vivo adenocarcinoma diagnosis through surface-enhanced Raman scattering (SERS); using low laser power and an integration time of one second. Several characteristic Raman peaks frequently used for the diagnosis of breast adenocarcinoma in the range of the amide III are successfully enhanced by breading the tissue with Au/SiO2 powder. The SERS activity of these Au/SiO2 powders is attributed to their rapid rehydration upon contact with the wet tissues, which promotes the formation of gold nanoparticle aggregates. The propensity of the Au/SiO2 cloud structures to adsorb biomolecules in the vicinity of the gold nanoparticle clusters promotes the necessary conditions for SERS detection. In addition, electron microscopy, together with elemental analysis, have been used to confirm the structure of the new Au/SiO2 cloud material and to investigate its distribution in breast tissues.

Interaction of TGA@CdTe Quantum Dots with an Extracellular Matrix of Haematococcus pluvialis Microalgae Detected Using Surface-Enhanced Raman Spectroscopy (SERS).

The present study reports the localization and interaction of thioglycolic acid (TGA) capped CdTe quantum dots (TGA@CdTe QDs) within the extracellular matrix (ECM) of Haematococcus pluvialis (Chlorophyceae) microalgae (HPM) after an incubation period of 5 min. Changes in the Raman spectrum of HPM induced by the adsorption of the TGA@CdTe QDs are successfully found by using naked gold anisotropic structures as nano-sensors for surface-enhanced Raman scattering (SERS effect). Raman spectroscopy results show that TGA@CdTe QDs interact with the biomolecules present in the ECM. Sample preparation and characterization by complementary techniques such as confocal and electron microscopy are also used to confirm the presence and localization of the nanoparticles in the algae. This research shows new evidence on early accumulation of QDs in plant cells and would further improve our understanding about their environmental impact.

SERS and integrative imaging upon internalization of quantum dots into human oral epithelial cells.

CdTe quantum dots (QDs) are widely used in bio-applications due to their size and highly efficient optical properties. However internalization mechanisms thereof for the variety of freshly extracted, not cultivated human cells and their specific molecular interactions remains an open topic for discussion. In this study, we assess the internalization mechanism of CdTe quantum dots (3.3 nm) capped with thioglycolic acid using non cultivated oral epithelial cells obtained from healthy donors. Naked gold nanoparticles (40 nm) were successfully used as nanosensors for surface-enhanced Raman spectroscopy to efficiently identify characteristic Raman peaks, providing new evidence indicating that the first interactions of these QDs with epithelial cells occurred preferentially with aromatic rings and amine groups of amino acid residues and glycans from trans-membrane proteins and cytoskeleton. Using an integrative combination of advanced imaging techniques, including ultra-high resolution SEM, high resolution STEM coupled with EDX spectroscopy together with the results obtained by Raman spectroscopy, it was determined that thioglycolic acid capped CdTe QDs are efficiently internalized into freshly extracted oral epithelial cells only by facilitated diffusion, distributed into cytoplasm and even within the cell nucleus in three minutes.

Photovoltaic properties of multilayered quantum dot/quantum rod-sensitized TiO2 solar cells fabricated by SILAR and electrophoresis.

A multilayered semiconductor sensitizer structure composed of three differently sized CdSe quantum rods (QRs), labeled as Q530, Q575, Q590, were prepared and deposited on the surface of mesoporous TiO2 nanoparticles by electrophoretic deposition (EPD) for photovoltaic applications. By varying the arrangement of layers as well as the time of EPD, the photoconversion efficiency was improved from 2.0% with the single layer of CdSe QRs (TiO2/Q590/ZnS) to 2.9% for multilayers (TiO2/Q590Q575/ZnS). The optimal EPD time was shorter for the multilayered structures. The effect of CdS quantum dots (QDs) deposited by successive ionic layer adsorption and reaction (SILAR) was also investigated. The addition of CdS QDs resulted in the enhancement of efficiency to 4.1% for the configuration (TiO2/CdS/Q590Q575/ZnS), due to increased photocurrent and photovoltage. Based on detailed structural, optical, and photoelectrical studies, the increased photocurrent is attributed to broadened light absorption while the increased voltage is due to a shift in the relevant energy levels.

Labeling of HeLa cells using ZrO2:Yb(3+)-Er(3+) nanoparticles with upconversion emission.

This work reports the synthesis, structural characterization, and optical properties of ZrO2:Yb(3+)-Er(3+) (2­1 mol%) nanocrystals. The nanoparticles were coated with 3-aminopropyl triethoxysilane (APTES) and further modified with biomolecules, such as Biotin-Anti-rabbit (mouse IgG) and rabbit antibody-AntiKi-67, through a conjugation method. The conjugation was successfully confirmed by Fourier transform infrared, zeta potential, and dynamic light scattering. The internalization of the conjugated nanoparticles in human cervical cancer (HeLa) cells was followed by two-photon confocal microscopy. The ZrO2:Yb(3+)-Er(3+) nanocrystals exhibited strong red emission under 970-nm excitation. Moreover, the luminescence change due to the addition of APTES molecules and biomolecules on the nanocrystals was also studied. These results demonstrate that ZrO2:Yb(3+)-Er(3+) nanocrystals can be successfully functionalized with biomolecules to develop platforms for biolabeling and bioimaging.