ABSTRACT
This research work analyses the influence of the use of by-products from a fluorite mine to replace the fine fraction of natural aggregates, on the properties of Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC). Replacing natural aggregates for different kinds of wastes is becoming common in concrete manufacturing and there are a number of studies into the use of waste from the construction sector in UHPFRC. However, there is very little work concerning the use of waste from the mining industry. Furthermore, most of the existing studies focus on granite wastes. So, using mining sand waste is an innovative alternative to replace natural aggregates in the manufacture of UHPFRC. The substitutions in this study are of 50%, 70% and 100% by volume of 0-0.5 mm natural silica sand. The results obtained show that the variations in the properties of consistency, compressive strength, modulus of elasticity and tensile strength, among others, are acceptable for substitutions of up to 70%. Therefore, fluorite mining sand waste is proved to be a viable alternative in the manufacturing of UHPFRC.
ABSTRACT
This study analyzes the effect of using waste by-products generated in the process of granite cutting as part of the granular structure of Ultra High Performance Concrete (UHPC). The manufactured concrete has a compressive strength greater than 115 MPa. This study substitutes 35%, 70% and 100% of the volume of micronized quartz powder (<40 µm) with granite cutting waste. This is an innovative study where the feasibility of using waste from granite quarries as a replacement for micronized quartz in UHPC has been analyzed. The results show an improvement in the workability and compressive strength of UHPC, for all substitution ratios. The flexural strength and tensile strength increase when the substitution ratio is 35%, and even the values obtained for 100% substitution are acceptable. In view of the results obtained in this study, granite cutting waste, instead of the micronized quartz powder usually used, is a viable alternative for the manufacture of expectedly more sustainable UHPC.
