Confinement-Induced Isosymmetric Metal-Insulator Transition in Ultrathin Epitaxial V2O3 Films.

Dimensional confinement has shown to be an effective strategy to tune competing degrees of freedom in complex oxides. Here, we achieved atomic layered growth of trigonal vanadium sesquioxide (V2O3) by means of oxygen-assisted molecular beam epitaxy. This led to a series of high-quality epitaxial ultrathin V2O3 films down to unit cell thickness, enabling the study of the intrinsic electron correlations upon confinement. By electrical and optical measurements, we demonstrate a dimensional confinement-induced metal-insulator transition in these ultrathin films. We shed light on the Mott-Hubbard nature of this transition, revealing a vanishing quasiparticle weight as demonstrated by photoemission spectroscopy. Furthermore, we prove that dimensional confinement acts as an effective out-of-plane stress. This highlights the structural component of correlated oxides in a confined architecture, while opening an avenue to control both in-plane and out-of-plane lattice components by epitaxial strain and confinement, respectively.

Concomitant Light-Reversible Magnetic Response in Multiferroic Oxide Heterostructures for Multiphysics Applications.

The concept of multiphysics, where materials respond to diverse external stimuli, such as magnetic fields, electric fields, light irradiation, stress, heat, and chemical reactions, plays a fundamental role in the development of innovative devices. Nanomanufacturing, especially in low-dimensional systems, enhances the synergistic interactions taking place on the nanoscale. Light-matter interaction, rather than electric fields, holds great promise for achieving low-power, wireless control over magnetism, solving two major technological problems: the feasibility of electrical contacts at smaller scales and the undesired heating of the devices. Here, we shed light on the remarkable reversible modulation of magnetism using visible light in epitaxial Fe3O4/BaTiO3 heterostructure. This achievement is underpinned by the convergence of two distinct mechanisms. First, the magnetoelastic effect, triggered by ferroelectric domain switching, induces a proportional change in coercivity and remanence upon laser illumination. Second, light-matter interaction induces charged ferroelectric domain walls' electrostatic decompensations, acting intimately on the magnetization of the epitaxial Fe3O4 film by magnetoelectric coupling. Crucially, our experimental results vividly illustrate the capability to manipulate magnetic properties using visible light. This concomitant mechanism provides a promising avenue for low-intensity visible-light manipulation of magnetism, offering potential applications in multiferroic devices.

Eco-Friendly Sol-Gel Coatings with Organic Corrosion Inhibitors for Lightweight AZ61 Alloy.

The latest advances in technology and materials science have catalyzed a transformative shift towards the adoption of environmentally conscious and lightweight materials across key sectors such as aeronautics, biomedical, and automotive industries. Noteworthy among these innovations are the magnesium-aluminum (Mg-Al) alloys employed in aeronautical applications, contributing to the overall reduction in aircraft weight and subsequently diminishing fuel consumption and mitigating atmospheric emissions. The present work delves into a study of the anti-corrosive properties inherent in various sol-gel coatings, leveraging a range of environmentally friendly corrosion inhibitors, specifically tailored for samples of the AZ61 alloy. Methodologically, the work involves the synthesis and application of sol-gel coatings on AZ61 alloy containing eco-friendly inhibitors: L-cysteine, N-acetyl-cysteine, curcumin and methylene blue. Subsequently, an accelerated corrosion test in a simulated saline environment is performed. Through microstructural and compositional analyses, the best inhibitors responses are achieved with inhibitors containing S, N heteroatoms and conjugated double bonds in their structure, probably due to the creation of a continuous MgCl2 layer. This research contributes to the ongoing discourse on protective eco-coatings, aligning with the broader paradigm shift towards sustainable and lightweight materials in key industries.

Reversible optical control of magnetism in engineered artificial multiferroics.

Optical means instead of electric fields may offer a new pathway for low-power and wireless control of magnetism, holding great potential to design next-generation memory and spintronic devices. Artificial multiferroic materials have shown remarkable suitability as platforms towards the optical control of magnetic properties. However, the practical use of magnetic modulation should be both stable and reversible and, particularly, it should occur at room temperature. Here we show an unprecedented reversible modulation of magnetism using low-intensity visible-light in Fe75Al25/BaTiO3 heterostructures, at room temperature. This is enabled by the existence of highly oriented charged domain walls arranged in arrays of alternating in-plane and out-of-plane ferroelectric domains with stripe morphology. Light actuation yields a net anisotropic stress caused by ferroelectric domain switching, which leads to a 90-degree reorientation of the magnetic easy axis. Significant changes in the coercivity and squareness ratio of the hysteresis loops can be light-modulated, encouraging the development of novel low energy-consumption wireless magneto-optical devices.

Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy.

Today's environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated.

Room Temperature Polymorphism in WO3 Produced by Resistive Heating of W Wires.

Polymorphous WO3 micro- and nanostructures have been synthesized by the controlled Joule heating of tungsten wires under ambient conditions in a few seconds. The growth on the wire surface is assisted by the electromigration process and it is further enhanced by the application of an external electric field through a pair of biased parallel copper plates. In this case, a high amount of WO3 material is also deposited on the copper electrodes, consisting of a few cm2 area. The temperature measurements of the W wire agrees with the values calculated by a finite element model, which has allowed us to establish the threshold density current to trigger the WO3 growth. The structural characterization of the produced microstructures accounts for the γ-WO3 (monoclinic I), which is the common stable phase at room temperature, along with low temperature phases, known as δ-WO3 (triclinic) on structures formed on the wire surface and ϵ-WO3 (monoclinic II) on material deposited on external electrodes. These phases allow for a high oxygen vacancies concentration, which is interesting in photocatalysis and sensing applications. The results could help to design experiments to produce oxide nanomaterials from other metal wires by this resistive heating method with scaling-up potential.

Generation of Defective Few-Layered Graphene Mesostructures by High-Energy Ball Milling and Their Combination with FeSiCuNbB Microwires for Reinforcing Microwave Absorbing Properties.

Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RLmin) = -21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe73.5Si13.5B9Cu1Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (-53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a fmin tunability is demonstrated, maintaining similar RLmin and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs.

Use of Polar Heliostats to Improve Levels of Natural Lighting inside Buildings with Little Access to Sunlight.

The growing need to increase environmental and energy sustainability in buildings (housing, offices, warehouses, etc.) requires the use of solar radiation as a renewable source of energy that can help to lower carbon footprint, making buildings more efficient and thereby contributing to a more sustainable planet, while enhancing the health and wellbeing of its occupants. One of the technologies deployed in the use of solar energy in buildings is heliostats. In this context, this paper presents an analysis of the performance of a heliostat illuminator to improve illumination in a classroom at the Campus of Rabanales of the University of Cordoba (Spain). A design of a system in charge of monitoring and measuring daylighting variables using Arduino hardware technology and free software is shown. This equipment develops the communications, programming and collection of lighting data. In parallel, installation of an artificial lighting system complementary to the natural lighting system is implemented. Finally, an analysis of the impact of the proposed solution on the improvement of energy efficiency is presented. Specifically, it is estimated that up to 64% of savings in artificial lighting can be achieved in spaces with heliostatic illuminators compared to those without them.

Hybrid Sol-Gel Coatings Doped with Non-Toxic Corrosion Inhibitors for Corrosion Protection on AZ61 Magnesium Alloy.

Physiological human fluid is a natural corrosive environment and can lead to serious corrosion and mechanical damages to light Mg-Al alloys used in prosthetics for biomedical applications. In this work, organic-inorganic hybrid coatings doped with various environmentally friendly and non-toxic corrosion inhibitors have been prepared by the sol-gel process for the corrosion protection of AZ61 magnesium alloys. Effectiveness has been evaluated by pH measurements, optical microscopy, and SEM during a standard corrosion test in a Hanks' Balanced Salt Solution. The results showed that the addition of an inhibitor to the sol-gel coating can improve significantly the corrosion performance, being an excellent barrier for the L-cysteine-doped hybrid sol-gel films. The incorporation of TiO2 nanoparticles, 2-Aminopyridine and quinine organic molecules slowed down the corrosion rate of the Mg-Al alloy. Graphene oxide seemed to have the same response to corrosion as the hybrid sol-gel coating without inhibitors.

Boosting the Tunable Microwave Scattering Signature of Sensing Array Platforms Consisting of Amorphous Ferromagnetic Fe2.25Co72.75Si10B15 Microwires and Its Amplification by Intercalating Cu Microwires.

The following work addresses new configurations of sensing array platforms that are composed of Co-based amorphous ferromagnetic microwires (MWs) to obtain an enhanced modulation of the microwave scattering effects through the application of low strength DC or AC magnetic fields. An amorphous MW is an ultrasoft ferromagnetic material (coercivity ~0.2 Oe) with a circumferential magnetic anisotropy that provides a high surface sensitivity when it is subjected to an external magnetic field. Firstly, microwave scattering experiments are performed as a function of the length and number of MWs placed parallel to each other forming an array. Subsequently, three array configurations are designed, achieving high S21 scattering coefficients up to about -50 dB. The influence of DC and AC magnetic fields on S21 has been analyzed in frequency and time domains representation, respectively. In addition, the MWs sensing array has been overlapped by polymeric surfaces and the variations of their micrometric thicknesses also cause strong changes in the S21 amplitude with displacements in the frequency that are associated to the maximum scattering behavior. Finally, a new concept for amplifying microwave scattering is provided by intercalating Cu MWs into the linear Co-based arrays. The designed mixed system that is composed by Co-based and Cu MWs exhibits a higher S21 coefficient when compared to a single Co-based MW system because of higher electrical conductivity of Cu. However, the ability to modulate the resulting electromagnetic scattering is conferred by the giant magneto-impedance (GMI) effects coming from properties of the ultrasoft amorphous MWs. The mixed array platform covers a wide range of sensor applications, demonstrating the feasibility of tuning the S21 amplitude over a wide scattering range by applying AC or DC magnetic fields and tuning the resonant frequency position according to the polymeric slab thickness.

Assessment of diagnostic tools for eradication of bovine tuberculosis in cattle co-infected with Mycobacterium bovis and M. avium subsp. paratuberculosis.

The intradermal tuberculin (IDTB) test and the interferon-gamma (IFN-gamma) assay are used worldwide for detection of bovine tuberculosis in cattle, but little is known about the effect of co-infecting agents on the performance of these diagnostic tests. This report describes a field trial conducted in a cattle herd with dual infection (bovine tuberculosis and paratuberculosis) during 3.5 years. It has been based on a strategic approach encompassing serial parallel testing (comparative IDTB test, the IFN-gamma assay and serology of paratuberculosis) that was repeated 8 times over the period, and segregation of animals into two herds. The IDTB test detected 65.2% and the IFN-gamma test detected 69.6% of the Mycobacterium bovis culture-positive cattle. However, the IDTB test performed better during the first part of the trial, while the IFN-gamma test was the only method that detected infected animals during the following three samplings. The number of false positive reactors with the IDTB and/or the IFN-gamma tests was remarkably high compared to other reports, and could be caused by cross-reactivity with M. avium subsp. paratuberculosis. Also, the M. bovis isolates from cattle and wildlife from the same property were characterised using molecular techniques to disclose an epidemiological link. The IDTB test may not be appropriate to eradicate bovine tuberculosis in herds with dual mycobacterial infections. This report highlights the need to use several diagnostic techniques for the accurate detection of M. bovis infected animals in these herds.

Interkinetic nuclear movement may provide spatial clues to the regulation of neurogenesis.

During the transition from S phase to mitosis, vertebrate neuroepithelial cells displace their nuclei and subsequently migrate from the basal membrane to the apical surface of the neuroepithelium, a phenomenon termed interkinetic nuclear movement (INM). Here we provide evidence that cycling neuroepithelial cells pass through a neurogenic state in which they are situated apically, as defined by the capacity to express Notch1, Delta1, and Neurogenin2 (Ngn2). Based on this scenario, we have developed a mathematical model to analyze the influence of INM on neurogenesis. In the absence of INM, the model predicted an increase in the rate of neurogenesis due to the reduction in the influence of inhibitory signals on cells in the neurogenic state. This exacerbation in neurogenesis led to the diminished growth of the neuroepithelium and a reduction in the later production of neurons. Pharmacological perturbation of the stereotypical distribution of precursors along the orthogonal axis of the neuroepithelium resulted in an excess of neurogenesis, as seen by the expression of Ngn2, and of the neuronal marker RA4 in the retina. These findings suggest that INM might be important for the efficient and continued production of neurons in G0, since it is involved in defining a proneural cluster in the ventricular part of the neuroepithelium that contains precursors at stages of the mitotic cycle compatible with neuronal differentiation.