Deposition of inhaled nanoparticles is reduced in subjects with COPD and correlates with the extent of emphysema: proof of concept for a novel diagnostic technique.

BACKGROUND: The diagnosis of chronic obstructive pulmonary disease (COPD) is often based on spirometry, which is not sensitive to early emphysema. We have recently described a method for assessing distal airspace dimensions by measuring recovery of nanoparticles in exhaled air after a single-breath inhalation followed by breath-hold. Recovery refers to the non-deposited particle fraction. The aim of this study was to explore differences in the recovery of exhaled nanoparticles in subjects with COPD and never-smoking controls. A secondary aim was to determine whether recovery correlates with the extent of emphysema. METHOD: A total of 19 patients with COPD and 19 controls underwent three repeats of single-breath nanoparticle inhalation followed by breath-hold. Particle concentrations in the inhaled aerosol, and in an alveolar sample exhaled after breath-hold, were measured to obtain recovery. FINDINGS: The patients with COPD had a significantly higher mean recovery than controls, 0·128 ± 0·063 versus 0·074 ± 0·058; P = 0·010. Also, recovery correlated significantly with computed tomography (CT) densitometry variables (P<0·01) and diffusing capacity for carbon monoxide (DL,CO ; P = 0·002). INTERPRETATION: Higher recovery for emphysema patients, relative to controls, is explained by larger diffusion distances in enlarged distal airspaces. The nanoparticle inhalation method shows potential to be developed towards a tool to diagnose emphysema.

Temperature-controlled airflow ventilation in operating rooms compared with laminar airflow and turbulent mixed airflow.

AIM: To evaluate three types of ventilation systems for operating rooms with respect to air cleanliness [in colony-forming units (cfu/m3)], energy consumption and comfort of working environment (noise and draught) as reported by surgical team members. METHODS: Two commonly used ventilation systems, vertical laminar airflow (LAF) and turbulent mixed airflow (TMA), were compared with a newly developed ventilation technique, temperature-controlled airflow (TcAF). The cfu concentrations were measured at three locations in an operating room during 45 orthopaedic procedures: close to the wound (<40cm), at the instrument table and peripherally in the room. The operating team evaluated the comfort of the working environment by answering a questionnaire. FINDINGS: LAF and TcAF, but not TMA, resulted in less than 10cfu/m3 at all measurement locations in the room during surgery. Median values of cfu/m3 close to the wound (250 samples) were 0 for LAF, 1 for TcAF and 10 for TMA. Peripherally in the room, the cfu concentrations were lowest for TcAF. The cfu concentrations did not scale proportionally with airflow rates. Compared with LAF, the power consumption of TcAF was 28% lower and there was significantly less disturbance from noise and draught. CONCLUSION: TcAF and LAF remove bacteria more efficiently from the air than TMA, especially close to the wound and at the instrument table. Like LAF, the new TcAF ventilation system maintained very low levels of cfu in the air, but TcAF used substantially less energy and provided a more comfortable working environment than LAF. This enables energy savings with preserved air quality.

A study on particles and some microbial markers in waterpipe tobacco smoke.

Waterpipe smoking is becoming increasingly popular worldwide. Research has shown that cigarette smoke, in addition to hundreds of carcinogenic and otherwise toxic compounds, may also contain compounds of microbiological origin. In the present study we analyzed waterpipe smoke for some microbial compounds. Both of the two markers studied, viz 3-hydroxy fatty acids of bacterial lipopolysaccharide (LPS) and ergosterol of fungal biomass, were found in waterpipe tobacco, in amounts similar as previously found in cigarette tobacco, and in smoke. Waterpipe mainstream smoke contained on average 1800 pmol LPS and 84.4 ng ergosterol produced per session. An average concentration of 2.8 pmol/m(3) of LPS was found in second hand smoke during a 1-2-h waterpipe smoking session while ergosterol was not detected; corresponding concentrations from smoking five cigarettes were 22.2 pmol/m(3) of LPS and 87.5 ng/m(3) of ergosterol. This is the first time that waterpipe smoking has been shown to create a bioaerosol. In the present study we also found that waterpipe smoking generated several polycyclic aromatic hydrocarbons, carbon monoxide, and high fraction of small (<200 nm) particles that may have adverse effects on human health upon inhalation.

Methodology for identifying particle sources in indoor environments.

Growing concern about airborne particles in indoor environments requires fast source identification in order to apply remedial actions. A methodology for identifying sources emitting particles larger than 0.5 microm was designed and applied. It includes: (1) visual inspection of interior surfaces in order to identify deposited particles and inspection of potential sources (equipment, materials, activities etc.) of airborne particles. (2) Technical measurements of airborne particles at different positions in a building with simultaneous logging of activities. (3) Isolating potential activities/particle sources in a test chamber, initially free from particles, for controlled characterizations of the particles generated. The methodology was applied in a study of three houses in southern Sweden. The results show that source identification is facilitated by knowledge of concentration variations between different rooms, real-time measurements together with activity reports and information on particle characteristics that are comparable with results from laboratory simulations. In the houses to which the methodology was applied, major particle emissions from textile handling were identified, which were likely due to detergent zeolite residues.