Quantitative measurement of udder oedema in dairy cows using ultrasound to monitor the effectiveness of diuretic treatment with furosemide.

INTRODUCTION: The aim of this study was to record the course of peripartal udder oedema with ultrasonography in dairy cows and to investigate the therapeutic effects of diuretic furosemide. For this purpose, a device with a force sensor for the ultrasound probe was developed, which ensured the generation of data under similar pressure conditions and thereby repeatable and comparable results. In a pretrial with ten cows, ultrasonographic measurements were performed daily at four locations per udder quarter beginning 14 days ante partum until 14 d post partum. The main study included 50 dairy cows. The experimental group (n=25) received 500 mg furosemide intramuscularly on the day of calving, as well as on the first and second day post partum. The control group (n=25) was treated with 10 mL 0,9 % sodium chloride solution (NaCl) at the same timepoints. The experimental period was extended from 21 days ante partum until 21 days post partum and included 15 ultrasonographic measurements at three-day intervals. The measurements were performed at the teat base, which turned out to be the most suitable location in the pretrial. Quarter milk samples were collected on the day of calving, 7 and 14 days post partum. The average thickness of the udder oedema between the group treated with furosemide and the control group did not differ. In conclusion, a method for the ultrasonographic measurement of udder oedema under comparable applied forces was established. The teat base turned out to be a suitable location to monitor the characteristic temporal course of udder oedema. In the present study, treatment with furosemide did not have a measurable, positive effect on the severity of the udder oedema post partum in the study animals. Finally, further studies with a higher sample size are necessary to confirm this relationship.

INTRODUCTION: Le but de la présente étude était d'enregistrer l'évolution de l'œdème de la mamelle périnatal par échographie chez les vaches laitières et d'étudier les effets thérapeutiques du diurétique furosémide. À cette fin, un appareil avec un capteur de force pour la sonde à ultrasons a été développé, ce qui a assuré la génération de données dans des conditions de pression similaires et ainsi des résultats reproductibles et comparables. Dans un essai préliminaire avec dix vaches, des mesures échographiques ont été effectuées quotidiennement à quatre endroits par quartier à partir de 14 jours ante partum jusqu'à 14 jours post partum. L'étude principale portait sur 50 vaches laitières. Le groupe expérimental (n=25) a reçu 500 mg de furosémide par voie intramusculaire le jour du vêlage ainsi que les premier et deuxième jours post-partum. Le groupe témoin (n = 25) a été traité avec 10 ml de solution de chlorure de sodium à 0,9 % (NaCl) aux mêmes moments. La période expérimentale a été étendue de 21 jours ante partum jusqu'à 21 jours post partum et comprenait 15 mesures échographiques à trois jours d'intervalle. Les mesures ont été effectuées à la base du trayon, qui s'est avérée être l'emplacement le plus approprié dans la phase préliminaire. Des échantillons de lait de chaque quartier ont été prélevés le jour du vêlage, 7 et 14 jours post-partum. L'épaisseur moyenne de l'œdème de la mamelle entre le groupe traité au furosémide et le groupe témoin ne différait pas. En conclusion, une méthode de mesure échographique de l'œdème de la mamelle sous des forces appliquées comparables a été établie. La base du trayon s'est avérée être un endroit approprié pour surveiller l'évolution temporelle caractéristique de l'œdème de la mamelle. Dans la présente étude, le traitement au furosémide n'a pas eu d'effet positif mesurable sur la gravité de l'œdème de la mamelle post-partum chez les animaux de l'étude. Enfin, d'autres études avec une taille d'échantillon plus élevée sont nécessaires pour confirmer cette relation.

Anatomy of equine incisors: Pulp horns and subocclusal dentine thickness.

BACKGROUND: Equine incisors are often reduced in height during corrective dental procedures. Increased knowledge of subocclusal dentine thickness and pulp morphology may help prevent iatrogenic pulpar exposure. Although such data exist for equine cheek teeth, there are currently no reliable data for incisors. OBJECTIVES: To measure the distances between pulp cavities and the occlusal as well as the labial surfaces of equine incisors and to test if these distances change with age. Furthermore, pulp morphology with regard to number and orientation of pulp horns was investigated. STUDY DESIGN: Observational study using cadaver material and high-resolution computed tomography. METHODS: Upper and lower incisor arcades were removed from heads of 13 horses and scanned with high-resolution computed tomography. 3D Models were reconstructed and configuration as well as number of the pulp horns was evaluated. Anatomical marker points were set to measure distances between the pulp horn tips and the labial and occlusal surfaces. RESULTS: Subocclusal dentine thickness ranged between 1.5 and 11.7 mm in upper and 0.7 and 6.7 mm in lower incisors. It decreased with tooth age. Distance to labial aspect ranged between 3.5 and 9.0 mm in upper and 3.8 and 8.1 mm in lower incisors and increased with tooth age. MAIN LIMITATIONS: Details of horse management, feeding and previous dental care were not available. Therefore, it remains unknown how these factors influenced the results. CONCLUSIONS: Although mean subocclusal dentine thickness of greater than 4.1 mm was found, equine incisors occasionally have less than 1 mm of thickness with potential for iatrogenic pulpar exposure during incisor reduction. Therefore, great care should be exercised by any practitioner during incisor reduction.

Impact of summer drought on isoprenoid emissions and carbon sink of three Scots pine provenances.

Scots pine (Pinus sylvestris L.) provenances cover broad ecological amplitudes. In a greenhouse study, we investigated the impact of drought stress and rewetting on gas exchange for three provenances (Italy: Emilia Romagna; Spain: Alto Ebro; Germany: East-German lowlands) of 2-year old Scots pine seedlings. CO2, water vapour and isoprenoid exchange of stressed and control trees were quantified with a four-chamber dynamic-enclosure system in the controlled environment of a climate chamber. The three provenances showed distinct isoprenoid emission patterns and were classified into a non-Δ3-carene, with either high α-/ß-pinene or ß-myrcene fraction, and a Δ3-carene dominated type. Isoprenoid emission rates, net-photosynthesis and transpiration were reduced during summer drought stress and significantly recovered after rewetting. A seasonal increase of isoprenoid emission rates towards autumn was observed for all control groups. Compared with the German provenance, the Spanish and Italian provenances revealed higher isoprenoid emission rates and more plastic responses to drought stress and seasonal development, which points to a local adaptation to climate. As a result of drought, net carbon uptake and transpiration of trees was reduced, but recovered after rewetting. We conclude from our study that Scots pine isoprenoid emission is more variable than expected and sensitive to drought periods, likely impacting regional air chemistry. Thus, a provenance-specific emission assessment accounting for reduced emission during prolonged (summer) drought is recommend for setting up biogenic volatile organic compound emission inventories used in air quality models.

[Deafness in the dog and cat: aetiology, diagnostics and treatment]. / Taubheit bei Hunden und Katzen: Ursachen, Diagnostik und Therapie.

Deafness is one of the most common sensory deficits in cats and dogs. Determining the scope and the cause of deafness is important for a possible therapy and can enable the handling of the animal by its owner as well as influence the decision about breeding with the affected animal. Electrodiagnostic testing using the brainstem auditory evoked response (BAER) enables an objective evaluation of the hearing function. Additionally, otoscopy and various diagnostic imaging techniques, including computed tomography, can help in determining the cause of deafness. While conductive deafness can often be treated, there is normally no satisfactory treatment for sensorineural deafness. In such cases, an important task of the attending veterinarian is to advise the owner on handling his/her animal.

Finite element analysis of equine incisor teeth. Part 1: determination of the material parameters of the periodontal ligament.

In equine dentistry, periodontal diseases are frequently found in aged horses. Excessive strains and stresses within the periodontal ligament (PDL) occurring during the masticatory cycle may be predisposing factors especially in old horses with short, worn teeth. The finite element (FE) analysis is a valuable tool to investigate such strains and stresses in biological materials but a precondition for a realistic and reliable FE analysis is accurate knowledge of material parameters. As no data exist concerning the PDL of equine incisor teeth, this study was undertaken to determine the equine specific, age related and load dependent Young's modulus of equine incisors. To determine the biomechanical behaviour of the PDL, the incisor jaw-regions of horses of different ages were sectioned into 5mm thick slice samples and the incisors experimentally intruded (i.e. axially displaced into the alveolus) while recording the load-displacement relationship. Based on high resolution micro-computer tomography (µCT)-datasets, reliable and detailed 3-dimensional models of the slice samples were constructed focusing on precisely modelling the anatomy of the PDL. FE calculations were then performed and set-actual comparisons of the FE results with the experimentally measured displacements enabled the Young's modulus of the PDL to be determined. The results of this study reflect the typical non-linear behaviour of the collagen fibres of the PDL and present a high load dependency of the PDL's Young's modulus. Further investigations calculating the strains and stresses within the periodontal ligament, teeth and surrounding bone of the entire rostral aspect of the jaw are warranted.

Finite element analysis of equine incisor teeth. Part 2: investigation of stresses and strain energy densities in the periodontal ligament and surrounding bone during tooth movement.

This study investigated the hypothetical contribution of biomechanical loading to the onset of equine odontoclastic tooth resorption and hypercementosis (EOTRH) and to elucidate the physiological age-related positional changes of the equine incisors. Based on high resolution micro-computed tomography (µCT) datasets, 3-dimensional models of entire incisor arcades and the canine teeth were constructed representing a young and an old incisor dentition. Special attention was paid to constructing an anatomically correct model of the periodontal ligament (PDL). Using previously determined Young's moduli for the equine incisor PDL, finite element (FE) analysis was performed. Resulting strains, stresses and strain energy densities (SEDs), as well as the resulting regions of tension and compression within the PDL and the surrounding bone were investigated during occlusion. The results showed a distinct distribution pattern of high stresses and corresponding SEDs in the PDL and bone. Due to the tooth movement, peaks of SEDs were obtained in the PDL as well as in the bone on the labial and palatal/lingual sides of the alveolar crest. At the root, highest SEDs were detected in the PDL on the palatal/lingual side slightly occlusal of the root tip. This distribution pattern of high SEDs within the PDL coincides with the position of initial resorptive lesions in EOTRH affected teeth. The position of high SEDs in the bone can explain the typical age-related alteration of shape and angulation of equine incisors.

Finite element analysis in 3-D models of equine cheek teeth.

Periodontal diseases occur frequently in equine dentistry and excessive strain in biological tissues is assumed to be a predisposing factor in their development. Finite element (FE) analysis enables strains and stresses occurring in the periodontium to be calculated and is a useful tool for testing this hypothesis. The current study aimed to establish reliable 3-D models from equine maxillary and mandibular cheek teeth for use in FE simulations, with particular attention to the detailed construction of the periodontal ligament (PDL). Age-related morphological aspects of the teeth and the periodontium were also considered by constructing different models for three defined age groups. Finally, the biomechanical behaviour of the equine PDL was examined during experimental tooth intrusion (i.e. axial displacement of the tooth into its alveolar socket). The results showed an increase in intrusion with increasing age due to age-related changes in the periodontal elastic properties. The general stress level in PDL and surrounding bone also increased with age. Reliable FE models were established to calculate aetiologically relevant biomechanical effects occurring in the equine periodontium.

Extraction methods in bovine obstetrics: comparison of the demanded energy and importance of calf and traction method in the variance of force and energy.

In a previous study we could demonstrate that in terms of the required forces alternate traction is preferable to simultaneous traction for the obstetrical delivery of calves. The aims of this study were to examine the required energies for delivery of calves and to compare the effects of the factors of calf and traction method on the forces and energies required for the delivery. In a biomechanical in vitro model 12 stillborn Holstein-Friesian calves were pulled through the pelvic specimen of a cow at a controlled speed using two electric motors. Traction was applied simultaneously (ST) to both legs or alternately (AT) to one leg at a time to advance it 10 cm (AT 10) or 5 cm (AT5). Energies on each limb were measured digitally using load cells. The lowest energy for the entrance of the elbows in the pelvis was necessary using AT10 (19.9 ± 7.2 kJ, P < 0.05). In contrast, for the entrance of the chest, AT10 (104.9 ± 24.7 kJ) demanded 9% (P < 0.01) and 16% (P < 0.001) more energy than AT5 (96.7 ± 21.0 kJ) and ST (90.5 ± 24.9 kJ), respectively. Simultaneous traction tended to be better than AT5 (P = 0.09). Variance component estimates revealed that the factor calf contributed the main effect to the emerging forces and required energy. The traction method was responsible for up to 13% of the variance in most of the cases, but it accounted for 42% of the variance regarding the forces on the lower limb as the chest entered the pelvis. Based on these findings, the decision of the clinician whether or not to perform a manual traction should depend mainly on the calf. However, when such a decision has been made, alternate limb traction, 10 cm at a time, should be used until both elbows have entered the pelvis and a simultaneous traction should then be applied to complete extraction of the chest.

Extraction forces in bovine obstetrics: an in vitro study investigating alternate and simultaneous traction modes.

Whether extraction of a calf in longitudinal anterior presentation should be carried out by simultaneous or alternate traction on the forelimbs remains controversial. Because most recommendations are based on empirical observations rather than on scientific studies, the aim of this study was to develop an in vitro model to objectively compare the forces occurring during alternate and simultaneous traction. In a biomechanical in vitro model, 12 dead Holstein-Friesian (Bos taurus) calves were pulled through the prepared pelvic specimen of a cow at a controlled speed using two electric motors. Traction was applied simultaneously (ST) to both legs or alternately (AT) to one leg at a time to advance the calf 5 cm (AT 5) or 10 cm (AT 10). Forces on each limb were measured digitally using load cells. In all cases, two peaks of maximum force occurred during the extraction of the cranial part of the body. The first peak was observed when the elbows were pulled into the pelvis, and the second peak occurred when the chest emerged from the pelvis. Up to and including entry of the elbows into the pelvis, the maximum force on a single limb (341+/-106 N) was lowest (P<0.01) using AT10. The maximum traction forces acting on a single limb using AT5 (411+/-86 N) and ST (431+/-127 N) did not differ (P>0.05). During extraction of the thorax, the maximum force acting on a single limb was lower (P<0.0001) using ST (352+/-98 N) compared with AT5 (432+/-79 N) and AT10 (547+/-115 N). Based on these findings, alternate-limb traction, 10 cm at a time, should be used until both elbows have entered the pelvis. Simultaneous traction should then be applied to both forelimbs to complete extraction of the chest.

ROS release and Hsp70 expression after exposure to 1,800 MHz radiofrequency electromagnetic fields in primary human monocytes and lymphocytes.

The aim of this study is to investigate if 1,800 MHz radiofrequency electromagnetic fields (RF-EMF) can induce reactive oxygen species (ROS) release and/or changes in heat shock protein 70 (Hsp70) expression in human blood cells, using different exposure and co-exposure conditions. Human umbilical cord blood-derived monocytes and lymphocytes were used to examine ROS release after exposure to continuous wave or different GSM signals (GSM-DTX and GSM-Talk) at 2 W/kg for 30 or 45 min of continuous or intermittent (5 min ON/5 min OFF) exposure. The cells were exposed to incubator conditions, to sham, to RF-EMF, or to chemicals in parallel. Cell stimulation with the phorbol ester phorbol-12-myristate-13-acetate (PMA; 1 microM) was used as positive control for ROS release. To investigate the effects on Hsp70 expression, the human monocytes were exposed to the GSM-DTX signal at 2 W/kg for 45 min, or to heat treatment (42 degrees C) as positive control. ROS production and Hsp70 expression were determined by flow cytometric analysis. The data were compared to sham and/or to control values and the statistical analysis was performed by the Student's t-test (P<0.05). The PMA treatment induced a significant increase in ROS production in human monocytes and lymphocytes when the data were compared to sham or to incubator controls. After continuous or intermittent GSM-DTX signal exposure (2 W/kg), a significantly different ROS production was detected in human monocytes if the data were compared to sham. However, this significant difference appeared due to the lowered value of ROS release during sham exposure. In human lymphocytes, no differences could be detected if data were compared either to sham or to incubator control. The Hsp70 expression level after 0, 1, and 2 h post-exposure to GSM-DTX signal at 2 W/kg for 1 h did not show any differences compared to the incubator or to sham control.

Sensitivity loss of Lif:Mg,Cu,P thermoluminescence dosemeters caused by oven annealing.

LiF:Mg,Cu,P is a very sensitive thermoluminescence material that can be used for personal dosimetry in radiology. But if this material is heated too much during annealing or reading it quickly loses its sensitivity. This study shows that an annealing oven in wide use can cause thermal damage to the dosemeters owing to inhomogeneous temperature distribution in the annealing tray. At annealing temperatures>240 degrees C, differences of only 1 degrees C lead to significant losses of sensitivity. Therefore, it is necessary to measure the distribution of temperature in the annealing tray for correct placement of the dosemeters in the tray.

Hsp70 expression and free radical release after exposure to non-thermal radio-frequency electromagnetic fields and ultrafine particles in human Mono Mac 6 cells.

The contemporary urban environment has become increasingly complex in its composition, leading to discussions regarding possible novel health effects. Two factors that recently have received considerable attention are ultrafine particles (UFP; <0.1 microm) produced by combustion processes and emissions from wireless communication devices like mobile phones that emit in the radio-frequency (RF) part of the spectrum. Several studies have shown biological effects of both these exposures in various cell systems. Here we investigate if exposure to UFP (12-14 nm, 100 microg/ml) and RF-electromagnetic fields (EMF; 2 W/kg specific absorption rate (SAR); continuous wave (CW) or modulated (217Hz or GSM-nonDTX)), alone or in combination influences levels of the superoxide radical anion or the stress protein heat-shock protein (Hsp70) in the human monocyte cell line Mono Mac 6. Heat treatment (42-43 degrees C, 1h) was used as positive control for both stress reaction and for heat development in the RF exposure setup. Our results clearly show that Mono Mac 6 cells are capable to internalise UFP, and that this phagocytic activity is connected to an increased release of free radicals. This increase (40-45% above negative control) is stronger than the effect of heat treatment. On the other hand, none of the employed RF exposures showed any effects on free radical levels. Co-exposure of RF and UFP did not potentiate the UFP effect either. Our investigations showed a significantly increased Hsp70 expression level by heat treatment in a time-dependent manner, whereas UFP, RF, or UFP+RF were without any effect. Therefore, we conclude that in the investigated Mono Mac 6 cells, RF exposure alone or in combination with UFP cannot influence stress-related responses.

Chirality of amino acids of microorganisms used in food biotechnology.

Bacteria of the genera Acetobacter, Bifidobacterium, Brevibacterium, Lactobacillus, Micrococcus, Propionibacterium, and Streptococcus, which are used as so-called starter cultures for the large-scale production of fermented foods and beverages in food biotechnology, have been investigated for the chirality of their amino acids (AA) by gas chromatography (GC). Bacteria were grown in complex media, centrifuged, and washed with 0.85% aqueous NaCl. Aliquots were totally hydrolyzed (6 M HCl, 110 degrees C, 18 h), or extracted with 70% aqueous ethanol in order to isolated free AA. The AA were adsorbed on Dowex WX 8 cation-exchanger, eluted with 4 M ammonia and converted into their N(O)-trifluoro-acetyl(TFA) 2-propyl esters or TFA methyl esters. The AA derivatives were investigated by capillary GC using the chiral stationary phases Chirasil-L-Val, Chirasil-D-Val, and Lipodex E. Besides L-AA, in all bacteria D-amino acids (D-AA) were detected; those in the highest relative amounts were D-Ala and D-Asp (occurring in all bacteria) and, in several cases, D-Glu. Lower, but significant amounts of other D-AA such as D-Ser, D-Pro, D-Val, D-Thr. D-Ile, D-Leu, D-Met, D-Phe, D-Tyr, D-Orn, and D-Lys were also detected in certain bacteria. These findings explain the origin of D-AA found in all fermented foods and drinks produced with the aid of bacterial starter cultures.