Iron(ii) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers.

The combination of inexpensive Fe(ii) acetate with low molecular weight aliphatic carboxamides in situ generates an effective catalyst system for the ring opening polymerisation of lactones. PLLAs were produced in melt conditions with molar masses of up to 15 kg mol-1, narrow dispersity (D = 1.03), and without racemisation. The catalytic system was investigated in detail with regard to Fe(ii) source, and steric and electronic effects of the amide's substituents. Furthermore, the synthesis of PLLA-PCL block copolymers of very low randomness was achieved. This commercially available, inexpensive, modular, and user-friendly catalyst mixture may be suitable for polymers with biomedical applications.

Multivalent grafting of hyperbranched oligo- and polyglycerols shielding rough membranes to mediate hemocompatibility.

Hemocompatible materials are needed for internal and extracorporeal biomedical applications, which should be realizable by reducing protein and thrombocyte adhesion to such materials. Polyethers have been demonstrated to be highly efficient in this respect on smooth surfaces. Here, we investigate the grafting of oligo- and polyglycerols to rough poly(ether imide) membranes as a polymer relevant to biomedical applications and show the reduction of protein and thrombocyte adhesion as well as thrombocyte activation. It could be demonstrated that, by performing surface grafting with oligo- and polyglycerols of relatively high polydispersity (>1.5) and several reactive groups for surface anchoring, full surface shielding can be reached, which leads to reduced protein adsorption of albumin and fibrinogen. In addition, adherent thrombocytes were not activated. This could be clearly shown by immunostaining adherent proteins and analyzing the thrombocyte covered area. The presented work provides an important strategy for the development of application relevant hemocompatible 3D structured materials.

Dynamic in vitro hemocompatibility testing of poly(ether imide) membranes functionalized with linear, methylated oligoglycerol and oligo(ethylene glycol).

Linear, side-chain methylated oligoglycerols (OGMe) were recently reported as potential surface passivating molecules for improving the protein resistance of cardiovascular application relevant poly(ether imide) (PEI) membranes. A previously reported in vitro screening under static test conditions allowed an end-point evaluation of the adhesion and activation of adherent thrombocytes performed on the material surfaces and revealed similar levels of thrombogenicity on PEI membranes, functionalized with OGMe and oligo(ethylene glycol) (OEG) of similar molecular weight (Mn = 1,300 g·mol-1 - 1,800 g·mol-1). In the present study, we investigated the hemocompatibility of these materials in a dynamic closed loop system, in order to study time-dependent thrombocyte material interactions also of the circulating thrombocytes by mimicking in vivo relevant flow conditions in a dynamic test system with multiple material contacts. Activation and aggregation of circulating thrombocytes as well as complement activation and plasmatic coagulation were evaluated after 40 circulations of thrombocyte rich plasma in the closed loop system. The results of the dynamic tests revealed no differences between the OGMe and OEG functionalized PEI membranes. Furthermore, no differences were observed between the latter and a PEI membrane treated under the conditions of functionalization at pH 11 (PEI-pH11) without an oligoether being present. Blood plasma protein adsorption, as well as activation, and adherence of circulating thrombocytes occurred in a comparable, but minor manner on all investigated PEI membranes. From this we conclude that the OGMe and OEG surface functionalization did not lead to an improvement of the already good hemocompatibility of the PEI-pH11 membrane.

Intracardiac injection of matrigel induces stem cell recruitment and improves cardiac functions in a rat myocardial infarction model.

Matrigel promotes angiogenesis in the myocardium from ischemic injury and prevents remodelling of the left ventricle. We assessed the therapeutic efficacy of intracardiac matrigel injection and matrigel-mediated stem cell homing in a rat myocardial infarction (MI) model. Following MI, matrigel (250 µl) or phosphate-buffered solution (PBS) was delivered by intracardiac injection. Compared to the MI control group (MI-PBS), matrigel significantly improved left ventricular function (n= 11, P < 0.05) assessed by pressure-volume loops after 4 weeks. There is no significant difference in infarct size between MI-matrigel (MI-M; 21.48 ± 1.49%, n = 10) and MI-PBS hearts (20.98 ± 1.25%, n = 10). The infarct wall thickness of left ventricle is significantly higher (P < 0.01) in MI-M (0.72 ± 0.02 mm, n = 10) compared with MI-PBS (0.62 ± 0.02 mm, n = 10). MI-M hearts exhibited higher capillary density (border 130.8 ± 4.7 versus 115.4 ± 6.0, P < 0.05; vessels per high-power field [HPF; 400×], n = 6) than MI-PBS hearts. c-Kit(+) stem cells (38.3 ± 5.3 versus 25.7 ± 1.5 c-Kit(+) cells per HPF [630×], n = 5, P < 0.05) and CD34(+) cells (13.0 ± 1.51 versus 5.6 ± 0.68 CD34(+) cells per HPF [630×], n = 5, P < 0.01) were significantly more numerous in MI-M than in MI-PBS in the infarcted hearts (n = 5, P < 0.05). Intracardiac matrigel injection restores myocardial functions following MI, which may attribute to the improved recruitment of CD34(+) and c-Kit(+) stem cells.

Polyethylenimine-mediated gene delivery into human bone marrow mesenchymal stem cells from patients.

Transplantation of mesenchymal stem cells (MSCs) derived from adult bone marrow has been proposed as a potential therapeutic approach for post-infarction left ventricular (LV) dysfunction. However, age-related functional decline of stem cells has restricted their clinical benefits after transplantation into the infarcted myocardium. The limitations imposed on patient cells could be addressed by genetic modification of stem cells. This study was designed to improve our understanding of genetic modification of human bone marrow derived mesenchymal stem cells (hMSCs) by polyethylenimine (PEI, branched with Mw 25 kD), one of non-viral vectors that show promise in stem cell genetic modification, in the context of cardiac regeneration for patients. We optimized the PEI-mediated reporter gene transfection into hMSCs, evaluated whether transfection efficiency is associated with gender or age of the cell donors, analysed the influence of cell cycle on transfection and investigated the transfer of therapeutic vascular endothelial growth factor gene (VEGF). hMSCs were isolated from patients with cardiovascular disease aged from 41 to 85 years. Optimization of gene delivery to hMSCs was carried out based on the particle size of the PEI/DNA complexes, N/P ratio of complexes, DNA dosage and cell viability. The highest efficiency with the cell viability near 60% was achieved at N/P ratio 2 and 6.0 µg DNA/cm(2) . The average transfection efficiency for all tested samples, middle-age group (<65 years), old-age group (>65 years), female group and male group was 4.32%, 3.85%, 4.52%, 4.14% and 4.38%, respectively. The transfection efficiency did not show any correlation either with the age or the gender of the donors. Statistically, there were two subpopulations in the donors; and transfection efficiency in each subpopulation was linearly related to the cell percentage in S phase. No significant phenotypic differences were observed between these two subpopulations. Furthermore, PEI-mediated therapeutic gene VEGF transfer could significantly enhance the expression level.

Cytocompatibility testing of cell culture modules fabricated from specific candidate biomaterials using injection molding.

Most polymers used in clinical applications today are materials that have been developed originally for application areas other than biomedicine. Testing the cell- and tissue-compatibility of novel materials in vitro and in vivo is of key importance for the approval of medical devices and is regulated according to the Council Directive 93/42/EEC of the European communities concerning medical devices. In the standardized testing methods the testing sample is placed in commercially available cell culture plates, which are often made from polystyrene. Thus not only the testing sample itself influences cell behavior but also the culture vessel material. In order to exclude this influence, a new system for cell testing will be presented allowing a more precise and systematic investigation by preparing tailored inserts which are made of the testing material. Inserts prepared from polystyrene, polycarbonate and poly(ether imide) were tested for their cytotoxity and cell adherence. Furthermore a proof of principle concerning the preparation of inserts with a membrane-like surface structure and its surface modification was established. Physicochemical investigations revealed a similar morphology and showed to be very similar to the findings to analogous preparations and modifications of flat-sheet membranes.

Localized SDF-1alpha gene release mediated by collagen substrate induces CD117 stem cells homing.

Stromal cell-derived factor-1alpha (SDF-1alpha) mediated mobilization and homing of stem cells showed promising potential in stem cell based tissue engineering and regenerative medicine. However local and sustained release of SDF-1alpha is indispensable for stem cell mediated regenerative process due to its short half-life under inflammatory conditions. In this study, a gene activated collagen substrate (GAC) was formed via assembly of plasmid encoding SDF-1alpha into a collagen substrate to create a microenvironment favoring stem cell homing. Local release of SDF-1alpha from the transfected cells on GAC and its effect on CD117(+) stem cell homing were investigated. Non-viral poly-ethyleneimine (25kDa PEI)/DNA complexes were mixed with rat tail collagen solution to form the GAC. Optimization of GAC was carried out based on collagen effects on the PEI/DNA complexes, viability and luciferase expression of COS7 cells on GAC. CD117(+) stem cells homing in response to SDF-1alpha local expression from transfected cells on GAC were investigated in a flow chamber in vitro and in a mouse hind limb model in vivo. The gene expression, migration of CD117(+) stem cells and the induced inflammation were investigated with immunostaining, reverse transcription polymerase chain reaction (RT-PCR) and H&E staining. The optimized parameters for GAC were DNA dosage 10 microg/cm(2), molar ratio of PEI nitrogen in primary amine to DNA phosphate (N/P ratio) 4 and mass ratio of collagen to DNA (C/D ratio) 1.0. It kept cell viability above 75% and transfection efficiency around 5.8 x 10(5) RLU/mg protein. GAC allowed the sustained gene release up to 60 days. GAC mediated SDF-1alpha gene release induced migration and homing of CD117(+) stem cells in vitro and in vivo significantly, and the inflammation of GAC reduced significantly two weeks after transplantation. GAC is a promising stem cell based therapeutic strategy for regenerative medicine.

Localized and sustained SDF-1 gene release mediated by fibronectin films: A potential method for recruiting stem cells.

Gene-activated matrix has wide potential utilization in tissue engineering. It may genetically modify cells with plasmid DNA encoding therapeutic genes and allow sustained expression and release of the proteins to surrounding tissues. In this study, we assessed the feasibility of the local gene release from human fibronectin (HFN) substrate and the efficacy of local release of stromal cell-derived factor-1 (SDF-1) gene on c-kit+ cell homing. Cationic polymer polyethylenimine (25kDa PEI) was used as non-viral DNA vector. Gene-activated HFN (GAH) was prepared by mixing PEI/DNA complexes with HFN substrate. The DNA retardation, the complex size, and the DNA release speed from the GAH were studied. The in vitro transfection was optimized by luciferase expression and cell viability assay in the COS7 cell line. Localized gene expression in COS7 cells cultured on the GAH was assessed by LacZ and GFP-N3-SDF-1 marker genes. Ckit+ cell homing was investigated in response to the local in vitro SDF-1 expression from rat mesenchymal stem cells (RMSCs) cultured on GAH. Results showed GAH allows long time-sustained DNA release, localized gene delivery, and high transfection efficiency. Local SDF-1 expression with GAH is a promising method to induce targetable stem cell homing.

Enhanced thoracic gene delivery by magnetic nanobead-mediated vector.

BACKGROUND: Systemic gene delivery is limited by the adverse hydrodynamic conditions on the collection of gene carrier particles to the specific area. In the present study, a magnetic field was employed to guide magnetic nanobead (MNB)/polymer/DNA complexes after systemic administration to the left side of the mouse thorax in order to induce localized gene expression. METHODS: Nonviral polymer (poly ethyleneimine, PEI) vector-gene complexes were conjugated to MNBs with the Sulfo-NHS-LC-Biotin linker. In vitro transfection efficacy of MNB/PEI/DNA was compared with PEI/DNA in three different cell lines as well as primary endothelial cells under magnetic field stimulation. In vivo, MNB/PEI/DNA complexes were injected into the tail vein of mice and an epicardial magnet was employed to attract the circulating MNB/PEI/DNA complexes. RESULTS: Endocytotic uptake of MNB/PEI/DNA complexes and intracellular gene release with nuclear translocation were observed in vitro, whereas the residues of MNB/PEI complexes were localized at the perinuclear region. Compared with PEI/DNA complexes alone, MNB/PEI/DNA complexes had a 36- to 85-fold higher transfection efficiency under the magnetic field. In vivo, the epicardial magnet effectively attracted MNB/PEI/DNA complexes in the left side of the thorax, resulting in strong reporter and therapeutic gene expression in the left lung and the heart. Gene expression in the heart was mainly within the endothelium. CONCLUSIONS: MNB-mediated gene delivery could comprise a promising method for gene delivery to the lung and the heart.

Bcl-2 engineered MSCs inhibited apoptosis and improved heart function.

Engraftment of mesenchymal stem cells (MSCs) derived from adult bone marrow has been proposed as a potential therapeutic approach for postinfarction left ventricular dysfunction. However, limited cell viability after transplantation into the myocardium has restricted its regenerative capacity. In this study, we genetically modified MSCs with an antiapoptotic Bcl-2 gene and evaluated cell survival, engraftment, revascularization, and functional improvement in a rat left anterior descending ligation model via intracardiac injection. Rat MSCs were manipulated to overexpress the Bcl-2 gene. In vitro, the antiapoptotic and paracrine effects were assessed under hypoxic conditions. In vivo, the Bcl-2 gene-modified MSCs (Bcl-2-MSCs) were injected after myocardial infarction. The surviving cells were tracked after transplantation. Capillary density was quantified after 3 weeks. The left ventricular function was evaluated by pressure-volume loops. The Bcl-2 gene protected MSCs against apoptosis. In vitro, Bcl-2 overexpression reduced MSC apoptosis by 32% and enhanced vascular endothelial growth factor secretion by more than 60% under hypoxic conditions. Transplantation with Bcl-2-MSCs increased 2.2-fold, 1.9-fold, and 1.2-fold of the cellular survival at 4 days, 3 weeks, and 6 weeks, respectively, compared with the vector-MSC group. Capillary density in the infarct border zone was 15% higher in Bcl-2-MSC transplanted animals than in vector-MSC treated animals. Furthermore, Bcl-2-MSC transplanted animals had 17% smaller infarct size than vector-MSC treated animals and exhibited functional recovery remarkably. Our current findings support the premise that transplantation of antiapoptotic gene-modified MSCs may have values for mediating substantial functional recovery after acute myocardial infarction.

Poly(ether imide) scaffolds as multifunctional materials for potential applications in regenerative medicine.

This article gives an overview of scaffolds that can be prepared from poly(ether imide) (PEI). These scaffolds were developed for extracorporeal blood detoxification processes in which specific compounds from blood or plasma are removed selectively. Both the preparation of porous microparticles and the preparation of hollow fibers are described. Commercially available particulate support materials have the disadvantage of a low accessibility of the internal pore system, a poor flow-through behavior and low adsorption specificity. Thus, novel support materials with optimally adapted properties profiles are needed. The second part of this article shows some recently developed highly asymmetric PEI hollow fibers. PEI scaffolds can be considered multifunctional because they combine separation characteristics, biocompatibility, sufficient biostability, and the possibility of creating tailor-made biofunctional surfaces.