Quantifying Anterior Chest Wall Deformity in Adolescent Idiopathic Scoliosis: Correlation With Other Deformity Measures and Effects of Anterior Thoracoscopic Scoliosis Surgery.

STUDY DESIGN: Retrospective cohort study. OBJECTIVES: This study investigated how anterior chest wall deformity is affected by thoracoscopic anterior scoliosis fusion (TASF) surgery in adolescent idiopathic scoliosis patients. We aimed to determine correlations pre- and postoperatively with other clinical and radiological scoliosis measures. BACKGROUND DATA: Scoliosis surgery aims to halt progression of the deformity, and to reduce its severity. Currently, deformity correction is clinically measured in terms of Cobb angle and rib hump (RH); however, a significant cosmetic concern for patients is anterior chest wall deformity. METHODS: Pre- and postoperative CT scans of 28 female, Lenke type 1 patients with a mean preoperative Cobb angle of 50.2° ± 7.1° were retrieved from the Research Group's surgical database. Using ImageJ, 3D reconstructions of the thorax were created. Two observers measured the anterior chest wall deformity as a chest wall angle (CWA) and posterior deformity as a posterior apical deformity angle (PDA). We investigated pre- to postoperative changes in CWA, PDA, RH, and Cobb angle as well as their interrelationship. RESULTS: All deformity parameters (Cobb angle, RH, CWA, and PDA) showed statistically significant improvement post TASF. Correlation was found between RH and Cobb angle pre- and postoperatively, Cobb angle and CWA preoperatively and between postoperative change in Cobb angle and CWA. No relationship was found between CWA and RH or PDA. CONCLUSIONS: Anterior chest wall deformity is independent from the posterior chest wall measures RH and PDA, indicating that the anterior chest wall deformity is not reflected in the posterior rib cage. The correlation between Cobb angle and CWA indicates that the deformity in the spine and the deformity in the ribs are related, and shows that the anterior chest wall deformity is improved post thoracoscopic anterior scoliosis fusion surgery as the lateral deviation of the spine is corrected. LEVEL OF EVIDENCE: Level III.

Understanding how axial loads on the spine influence segmental biomechanics for idiopathic scoliosis patients: A magnetic resonance imaging study.

BACKGROUND: Segmental biomechanics of the scoliotic spine are important since the overall spinal deformity is comprised of the cumulative coronal and axial rotations of individual joints. This study investigates the coronal plane segmental biomechanics for adolescent idiopathic scoliosis patients in response to physiologically relevant axial compression. METHODS: Individual spinal joint compliance in the coronal plane was measured for a series of 15 idiopathic scoliosis patients using axially loaded magnetic resonance imaging. Each patient was first imaged in the supine position with no axial load, and then again following application of an axial compressive load. Coronal plane disc wedge angles in the unloaded and loaded configurations were measured. Joint moments exerted by the axial compressive load were used to derive estimates of individual joint compliance. FINDINGS: The mean standing major Cobb angle for this patient series was 46°. Mean intra-observer measurement error for endplate inclination was 1.6°. Following loading, initially highly wedged discs demonstrated a smaller change in wedge angle, than less wedged discs for certain spinal levels (+2,+1,-2 relative to the apex, (p<0.05)). Highly wedged discs were observed near the apex of the curve, which corresponded to lower joint compliance in the apical region. INTERPRETATION: While individual patients exhibit substantial variability in disc wedge angles and joint compliance, overall there is a pattern of increased disc wedging near the curve apex, and reduced joint compliance in this region. Approaches such as this can provide valuable biomechanical data on in vivo spinal biomechanics of the scoliotic spine, for analysis of deformity progression and surgical planning.

A biomechanical investigation of dual growing rods used for fusionless scoliosis correction.

BACKGROUND: The use of dual growing rods is a fusionless surgical approach to the treatment of early onset scoliosis which aims to harness potential growth and correct spinal deformity. The purpose of this study was to compare the in-vitro biomechanical response of two different dual rod designs under axial rotation loading. METHODS: Six porcine spines were dissected into seven level thoracolumbar multi-segment units. Each specimen was mounted and tested in a biaxial Instron machine, undergoing nondestructive left and right axial rotation to peak moments of 4 Nm at a constant rotation rate of 8 deg. s(-1). A motion tracking system (Optotrak) measured 3D displacements of individual vertebrae. Each spine was tested in an un-instrumented state first and then with appropriately sized semi-constrained and 'rigid' growing rods in alternating sequence. The range of motion, neutral zone size and stiffness were calculated from the moment-rotation curves and intervertebral range of motion was calculated from Optotrak data. FINDINGS: Irrespective of test sequence, rigid rods showed a significant reduction of total rotation across all instrumented levels (with increased stiffness) whilst semi-constrained rods exhibited similar rotational behavior to the un-instrumented spines (P<0.05). An 11.1% and 8.0% increase in stiffness for left and right axial rotation respectively and 14.9% reduction in total range of motion were recorded with dual rigid rods compared with semi-constrained rods. INTERPRETATION: Based on these findings, the Semi-constrained growing rods were shown to not increase axial rotation stiffness compared with un-instrumented spines. This is thought to provide a more physiological environment for the growing spine compared to dual rigid rod constructs.

Investigating the change in three dimensional deformity for idiopathic scoliosis using axially loaded MRI.

BACKGROUND: Adolescent idiopathic scoliosis is a complex three-dimensional deformity, involving a lateral deformity in the coronal plane and axial rotation of the vertebrae in the transverse plane. Gravitational loading plays an important biomechanical role in governing the coronal deformity, however, less is known about how they influence the axial deformity. This study investigates the change in three-dimensional deformity of a series of scoliosis patients due to compressive axial loading. METHODS: Magnetic resonance imaging scans were obtained and coronal deformity (measured using the coronal Cobb angle) and axial rotations measured for a group of 18 scoliosis patients (Mean major Cobb angle was 43.4°). Each patient was scanned in an unloaded and loaded condition while compressive loads equivalent to 50% body mass were applied using a custom developed compressive device. FINDINGS: The mean increase in major Cobb angle due to compressive loading was 7.4° (SD 3.5°). The most axially rotated vertebra was observed at the apex of the structural curve and the largest average intravertebral rotations were observed toward the limits of the coronal deformity. A level-wise comparison showed no significant difference between the average loaded and unloaded vertebral axial rotations (intra-observer error=2.56°) or intravertebral rotations at each spinal level. INTERPRETATION: This study suggests that the biomechanical effects of axial loading primarily influence the coronal deformity, with no significant change in vertebral axial rotation or intravertebral rotation observed between the unloaded and loaded condition. However, the magnitude of changes in vertebral rotation with compressive loading may have been too small to detect given the resolution of the current technique.

A biomechanical investigation of vertebral staples for fusionless scoliosis correction.

BACKGROUND: Fusionless scoliosis surgery is an early-stage treatment for idiopathic scoliosis which claims potential advantages over current fusion-based surgical procedures. Anterior vertebral stapling using a shape memory alloy staple is one such approach. Despite increasing interest in this technique, little is known about the effects on the spine following insertion, or the mechanism of action of the staple. The purpose of this study was to investigate the biomechanical consequences of staple insertion in the anterior thoracic spine, using in vitro experiments on an immature bovine model. METHODS: Individual calf spine thoracic motion segments were tested in flexion, extension, lateral bending and axial rotation. Changes in motion segment rotational stiffness following staple insertion were measured on a series of 14 specimens. Strain gauges were attached to three of the staples in the series to measure forces transmitted through the staple during loading. A micro-CT scan of a single specimen was performed after loading to qualitatively examine damage to the vertebral bone caused by the staple. FINDINGS: Small but statistically significant decreases in bending stiffness (P<0.05) occurred in flexion, extension, lateral bending away from the staple, and axial rotation away from the staple. Each strain-gauged staple showed a baseline compressive loading following insertion which was seen to gradually decrease during testing. Post-test micro-CT showed substantial bone and growth plate damage near the staple. INTERPRETATION: Based on our findings it is possible that growth modulation following staple insertion is due to tissue damage rather than sustained mechanical compression of the motion segment.

Histopathological analysis of Leri-Weill dyschondrosteosis: disordered growth plate.

Leri-Weill syndrome (LWS) is a dominant (pseudoautosomal) skeletal dysplasia with mesomelic short stature and bilateral Madelung deformity, due to dyschondrosteosis of the distal radius. It results from the loss of one copy of the Short Stature Homeobox Gene (SHOX) from the tip of the short arm of the X or Y chromosome. SHOX molecular testing enabled us to evaluate the histopathology of the radial physis in LWS patients with a documented SHOX abnormality. A widespread disorganisation of physeal anatomy was revealed with disruption of the normal parallel columnar arrangement of chondrocytes. Tandem stacking of maturing chondrocytes within columns was replaced by a side-by-side arrangement. The presence of hypertrophic osteoid with micro-enchondromata in the radial metaphysis suggests abnormal endochondral ossification. The Vickers' ligament was confirmed to blend with the triangular fibrocartilage complex (TFCC). This histopathological study demonstrates that the zone of dyschondrosteosis in LWS is characterised by marked disruption of normal physeal chondrocyte processes and that a generalised physeal abnormality is present.