Chitosan-PNIPAM Thermogel Associated with Hydrogel Microspheres as a Smart Formulation for MSC Injection.

Regenerative medicine based on cell therapy has emerged as a promising approach for the treatment of various medical conditions. However, the success of cell therapy heavily relies on the development of suitable injectable hydrogels that can encapsulate cells and provide a conducive environment for their survival, proliferation, and tissue regeneration. Herein, we address the medical need for cyto- and biocompatible injectable hydrogels by reporting on the synthesis of a hydrogel-forming thermosensitive copolymer. The copolymer was synthesized by grafting poly(N-isopropylacrylamide-co-carboxymethyl acrylate) (PNIPAM-COOH) onto chitosan through amide coupling. This chemical modification resulted in the formation of hydrogels that exhibit a sol-gel transition with an onset at approximately 27 °C, making them ideal for use in injectable applications. The hydrogels supported the survival and proliferation of cells for several days, which is critical for cell encapsulation. Furthermore, the study evaluates the addition of collagen/chitosan hybrid microspheres to support the adhesion of mesenchymal stem cells within the hydrogels. Altogether, these results demonstrate the potential of the PNIPAM-chitosan thermogel for cell encapsulation and its possible applications in regenerative medicine.

Engineered human liver based on pullulan-dextran hydrogel promotes mice survival after liver failure.

Liver tissue engineering approaches aim to support drug testing, assistance devices, or transplantation. However, their suitability for clinical application remains unsatisfactory. Herein, we demonstrate the beneficial and biocompatible use of porous pullulan-dextran hydrogel for the self-assembly of hepatocytes and biliary-like cells into functional 3D microtissues. Using HepaRG cells, we obtained 21 days maintenance of engineered liver polarity, functional detoxification and excretion systems, as well as glycogen storage in hydrogel. Implantation on two liver lobes in mice of hydrogels containing 3800 HepaRG 3D structures of 100 â€‹µm in diameter, indicated successful engraftment and no signs of liver toxicity after one month. Finally, after acetaminophen-induced liver failure, when mice were transplanted with engineered livers on left lobe and peritoneal cavity, the survival rate at 7 days significantly increased by 31.8% compared with mice without cell therapy. These findings support the clinical potential of pullulan-dextran hydrogel for liver failure management.

Channeled polysaccharide-based hydrogel reveals influence of curvature to guide endothelial cell arrangement in vessel-like structures.

Within the biomaterials proposed for tissue regeneration, synthetic 3D hydrogels that mimic soft tissues possess great potential for regenerative medicine but their poor vascularization rate is usually incompatible with long-term cell survival. Fabrication of biomaterials that promote and/or accelerate vascularization remains nowadays a challenge. In the present work, hydrogels with tubular geometries ranging from 28 to 680 µm in diameter, that correspond to those of human small artery/veins and arterioles and venules, were prepared. The surface of this tubes was coated with proteins of the extracellular matrix assuring the adhesion of endothelial cells in a monolayer. Interestingly, in the case of small diameter channels, polysaccharide-based hydrogels made of neutral pullulan and dextran that do not allow endothelial cell adhesion, were transformed into active materials guiding endothelial cell behavior solely by modification of the internal microarchitecture, without addition of proteins. Under static conditions, endothelial cell adhesion, migration, proliferation and polarization on the hydrogel was induced, without the addition of any extracellular matrix protein or adhesion peptide; this property was found to be directly dependent on the curvature of the internal channels. In the last years, the impact of the geometry of biomaterials to regulate cell behavior has been highlighted paving the way to use non-flat geometries as cues to develop biomaterials to guide tissue regeneration. Here, we report a functional material based on geometrical cues to assure endothelial cell arrangement in tubular vessel-like structures and providing with new pro-vascularizing properties.

Human bone marrow stem/stromal cell osteogenesis is regulated via mechanically activated osteocyte-derived extracellular vesicles.

Bone formation or regeneration requires the recruitment, proliferation, and osteogenic differentiation of stem/stromal progenitor cells. A potent stimulus driving this process is mechanical loading. Osteocytes are mechanosensitive cells that play fundamental roles in coordinating loading-induced bone formation via the secretion of paracrine factors. However, the exact mechanisms by which osteocytes relay mechanical signals to these progenitor cells are poorly understood. Therefore, this study aimed to demonstrate the potency of the mechanically stimulated osteocyte secretome in driving human bone marrow stem/stromal cell (hMSC) recruitment and differentiation, and characterize the secretome to identify potential factors regulating stem cell behavior and bone mechanobiology. We demonstrate that osteocytes subjected to fluid shear secrete a distinct collection of factors that significantly enhance hMSC recruitment and osteogenesis and demonstrate the key role of extracellular vesicles (EVs) in driving these effects. This demonstrates the pro-osteogenic potential of osteocyte-derived mechanically activated extracellular vesicles, which have great potential as a cell-free therapy to enhance bone regeneration and repair in diseases such as osteoporosis.

Development of 3D Hepatic Constructs Within Polysaccharide-Based Scaffolds with Tunable Properties.

Organoids production is a key tool for in vitro studies of physiopathological conditions, drug-induced toxicity assays, and for a potential use in regenerative medicine. Hence, it prompted studies on hepatic organoids and liver regeneration. Numerous attempts to produce hepatic constructs had often limited success due to a lack of viability or functionality. Moreover, most products could not be translated for clinical studies. The aim of this study was to develop functional and viable hepatic constructs using a 3D porous scaffold with an adjustable structure, devoid of any animal component, that could also be used as an in vivo implantable system. We used a combination of pharmaceutical grade pullulan and dextran with different porogen formulations to form crosslinked scaffolds with macroporosity ranging from 30 µm to several hundreds of microns. Polysaccharide scaffolds were easy to prepare and to handle, and allowed confocal observations thanks to their transparency. A simple seeding method allowed a rapid impregnation of the scaffolds with HepG2 cells and a homogeneous cell distribution within the scaffolds. Cells were viable over seven days and form spheroids of various geometries and sizes. Cells in 3D express hepatic markers albumin, HNF4α and CYP3A4, start to polarize and were sensitive to acetaminophen in a concentration-dependant manner. Therefore, this study depicts a proof of concept for organoid production in 3D scaffolds that could be prepared under GMP conditions for reliable drug-induced toxicity studies and for liver tissue engineering.

Functionalized polymer microbubbles as new molecular ultrasound contrast agent to target P-selectin in thrombus.

Thrombotic diseases rarely cause symptoms until advanced stage and sudden death. Thus, early detection of thrombus by a widely spread imaging modality can improve the prognosis and reduce mortality. Here, polymer microbubbles (MBs) made of degradable poly(IsoButylCyanoAcrylate) and functionalized with fucoidan (Fucoidan-MBs) were designed as a new targeted ultrasound contrast agent to image venous thrombus. The physicochemical characterizations demonstrate that the MBs with fucoidan surface exhibit a size of 2-6 µm and stability in suspension at 4 °C up to 2 months. MBs exhibit high echogenicity and could be completely burst under high destructive pulse. Flow chamber experiments on activated human platelets show a higher affinity of Fucoidan-MBs than control anionic MBs (CM-Dextran-MBs) under shear stress conditions. In vivo analysis by ultrasound and histological results demonstrate that Fucoidan-MBs are localized in rat venous thrombotic wall, whereas few CM-Dextran-MBs are present. In addition, the binding of Fucoidan-MBs in healthy vein is not observed. Collectively, Fucoidan-MBs appear as a promising functionalized carrier for ultrasound molecular imaging in thrombotic diseases.

Enhanced corrosion resistance and cytocompatibility of biomimetic hyaluronic acid functionalised silane coating on AZ31 Mg alloy for orthopaedic applications.

This paper reports the corrosion resistant and cytocompatible properties of the hyaluronic acid-silane coating on AZ31 Mg alloy. In this study, the osteoinductive properties of high molecular weight hyaluronic acid (HA, 1-4 MDa) and the corrosion protection of silane coatings were incorporated as a composite coating on biodegradable AZ31 Mg alloy for orthopaedic applications. The multi-step fabrication of coatings first involved dip coating of a passivated AZ31 Mg alloy with a methyltriethoxysilane-tetraethoxysilane sol-gel to deposit a dense, cross-linked and corrosion resistant silane coating (AZ31-MT). The second step was to create an amine-functionalised surface by treating coated alloy with 3-aminopropyl-triethoxy silane (AZ31-MT-A) which facilitated the immobilisation of HA via EDC-NHS coupling reactions at two different concentrations i.e 1 mg.ml-1 (AZ31-MT-A-HA1) and 2 mg.ml-1 (AZ31-MT-A-HA2). These coatings were characterised by Fourier transform infrared spectroscopy, atomic force microscopy and static contact angle measurements which confirmed the successful assembly of the full coatings onto AZ31 Mg alloy. The influence of HA-silane coating on the corrosion of Mg alloy was investigated by electrical impedance spectroscopy and long-term immersion studies measurements in HEPES buffered DMEM. The results showed an enhanced corrosion resistance of HA functionalised silane coated AZ31 substrate over the uncoated equivalent alloy. Furthermore, the cytocompatibility of MC3T3-E1 osteoblasts was evaluated on HA-coated AZ31-MT-A substrates by live-dead staining, quantification of total cellular DNA content, scanning electron microscope and alkaline phosphatase activity. The results showed HA concentration-dependent improvement of osteoblast cellular response in terms of enhanced cell adhesion, proliferation and differentiation. These findings hold great promise in employing such biomimetic multifunctional coatings to improve the corrosion resistance and cytocompatibility of biodegradable Mg-based alloy for orthopaedic applications.

Thin films of binary amorphous Zn-Zr alloys developed by magnetron co-sputtering for the production of degradable coronary stents: A preliminary study.

Image 1.

Effect of cross-linking on the physicochemical and in vitro properties of pullulan/dextran microbeads.

Hydrogels are very promising for tissue engineering as they provide scaffolds and a suitable microenvironment to control cell behavior and tissue regeneration. We used a patented method to obtain beads of pullulan/dextran cross-linked with sodium trimetaphosphate (STMP), that were already described for in vivo bone repair. The aim of this study was to provide a comparative analysis of microbeads made of polysaccharides prepared using three different STMP feeding ratio of 1.5, 2.25 or 3 % w/w. The morphology, swelling and biodegradability of these structures were assessed. Mesenchymal stem cells were also seeded to evaluate the cell organization onto the beads. We found that the amount of phosphorus resulting from the cross-linking was proportional to the introduced STMP concentration. An increase of cross-linking decreased the in vitro enzymatic degradability, and also decreased the swelling in PBS or water. The microstructures observed by SEM and confocal microscopy indicated that homogeneous spherical microbeads were obtained, except for the lower cross-linking ratio where the shapes were altered. Beads hydrated in PBS exhibited a mean diameter ranging from 400 to 550 µm with the decrease of STMP ratio. Cells adhered to the surface of microbeads even in the absence of protein coating. Cell viability studies revealed an increase in cell numbers over two weeks for the highest cross-linked beads, whereas the two lowest STMP concentrations induced a decrease of cell viability. Overall, this study demonstrated that pullulan/dextran hydrogels can be designed as microbeads with adjustable physicochemical and biological properties to fulfill requirements for tissue engineering approaches.

TRPV4-mediates oscillatory fluid shear mechanotransduction in mesenchymal stem cells in part via the primary cilium.

Skeletal homeostasis requires the continued replenishment of the bone forming osteoblast from a mesenchymal stem cell (MSC) population, a process that has been shown to be mechanically regulated. However, the mechanisms by which a biophysical stimulus can induce a change in biochemical signaling, mechanotransduction, is poorly understood. As a precursor to loading-induced bone formation, deciphering the molecular mechanisms of MSC osteogenesis is a critical step in developing novel anabolic therapies. Therefore, in this study we characterize the expression of the mechanosensitive calcium channel Transient Receptor Potential subfamily V member 4 (TRPV4) in MSCs and demonstrate that TRPV4 localizes to areas of high strain, specifically the primary cilium. We demonstrate that TRPV4 is required for MSC mechanotransduction, mediating oscillatory fluid shear induced calcium signaling and early osteogenic gene expression. Furthermore, we demonstrate that TRPV4 can be activated pharmacologically eliciting a response that mirrors that seen with mechanical stimulation. Lastly, we show that TRPV4 localization to the primary cilium is functionally significant, with MSCs with defective primary cilia exhibiting an inhibited osteogenic response to TRPV4 activation. Collectively, this data demonstrates a novel mechanism of stem cell mechanotransduction, which can be targeted therapeutically, and further highlights the critical role of the primary cilium in MSC biology.

Oscillatory fluid flow induces the osteogenic lineage commitment of mesenchymal stem cells: The effect of shear stress magnitude, frequency, and duration.

A potent regulator of bone anabolism is physical loading. However, it is currently unclear whether physical stimuli such as fluid shear within the marrow cavity is sufficient to directly drive the osteogenic lineage commitment of resident mesenchymal stem cells (MSC). Therefore, the objective of the study is to employ a systematic analysis of oscillatory fluid flow (OFF) parameters predicted to occur in vivo on early MSC osteogenic responses and late stage lineage commitment. MSCs were exposed to OFF of 1Pa, 2Pa and 5Pa magnitudes at frequencies of 0.5Hz, 1Hz and 2Hz for 1h, 2h and 4h of stimulation. Our findings demonstrate that OFF elicits a positive osteogenic response in MSCs in a shear stress magnitude, frequency, and duration dependent manner that is gene specific. Based on the mRNA expression of osteogenic markers Cox2, Runx2 and Opn after short-term fluid flow stimulation, we identified that a regime of 2Pa shear magnitude and 2Hz frequency induces the most robust and reliable upregulation in osteogenic gene expression. Furthermore, long-term mechanical stimulation utilising this regime, elicits a significant increase in collagen and mineral deposition when compared to static control demonstrating that mechanical stimuli predicted within the marrow is sufficient to directly drive osteogenesis.

TGFß1 - induced recruitment of human bone mesenchymal stem cells is mediated by the primary cilium in a SMAD3-dependent manner.

The recruitment of mesenchymal stem cells (MSCs) is a crucial process in the development, maintenance and repair of tissues throughout the body. Transforming growth factor-ß1 (TGFß1) is a potent chemokine essential for the recruitment of MSCs in bone, coupling the remodelling cycle. The primary cilium is a sensory organelle with important roles in bone and has been associated with cell migration and more recently TGFß signalling. Dysregulation of TGFß signalling or cilia has been linked to a number of skeletal pathologies. Therefore, this study aimed to determine the role of the primary cilium in TGFß1 signalling and associated migration in human MSCs. In this study we demonstrate that low levels of TGFß1 induce the recruitment of MSCs, which relies on proper formation of the cilium. Furthermore, we demonstrate that receptors and downstream signalling components in canonical TGFß signalling localize to the cilium and that TGFß1 signalling is associated with activation of SMAD3 at the ciliary base. These findings demonstrate a novel role for the primary cilium in the regulation of TGFß signalling and subsequent migration of MSCs, and highlight the cilium as a target to manipulate this key pathway and enhance MSC recruitment for the treatment of skeletal diseases.

3D compartmented model to study the neurite-related toxicity of Aß aggregates included in collagen gels of adaptable porosity.

UNLABELLED: Insoluble deposits of ß-amyloid (Aß) are associated to neurodegenerative pathologies, in particular Alzheimer's Disease (AD). The toxicity of synthetic amyloid-like peptides has been largely demonstrated and shown to depend upon their aggregation state. However, standard 2D cell culture conditions are not well suited to study the role of the close vicinity of Aß aggregates and growing neurites in the degenerative process. Here, we have designed a compartmented set-up where model neural cells are differentiated on the surface of Aß-containing collagen matrices. The average pore size can be modulated, from below 0.2µm to more than 0.5µm by simple treatment with collagenase, to respectively hamper or permit neurite outgrowth towards the depth of the matrix. Dense Aß aggregates (Congo red and ThT-positive) were obtained inside the collagen matrix with a homogeneous distribution and dimensions similar to those observed in post-mortem brain slices from Alzheimer's patients. The aggregates are not toxic to cells when the pore size is small, in spite of relatively high concentrations of 0.05-0.62mg of peptide per gram of collagen (equivalent to 11.3-113µM). In contrast, on Aß-containing matrices with large pores, massive neural death is observed when the cells are seeded in the same conditions. It is the first time to our knowledge that Aß aggregates with a typical morphology of dense plaques are obtained within a porous biomimetic matrix, and are shown to be toxic only when accessible to differentiating cells. STATEMENT OF SIGNIFICANCE: Insoluble deposits of ß-amyloid (Aß) are associated to neurodegenerative pathologies, in particular Alzheimer's Disease (AD). In this study, we have formed Aß aggregates directly inside a biomimetic collagen matrix loaded with growth factors to induce the differentiation of PC12 or SH-SY6Y cells. For the first time, we show that when the contact between cells and Aß aggregates is allowed by opening up the matrix porosity, the close vicinity with aggregates induces neurite dystrophy. The compartmented 3D culture model developed and used in this study is a valuable tool to study the cytotoxicity of preformed dense Aß aggregates and proves that contact between the aggregates and neurons is required to induce neurodegenerative processes.