ABSTRACT
This study presents an innovative approach for the reuse and recycling of waste material, brewer's spent grain (BSG) for creating a novel green biocatalyst. The same BSG was utilized in several consecutive steps: initially, it served as a substrate for the cultivation and production of laccase by a novel isolated fungal strain, Coriolopsis trogii 2SMKN, then, it was reused as a carrier for laccase immobilization, aiding in the process of azo dye decolorization and finally, reused as recycled BSG for the second successful laccase immobilization for six guaiacol oxidation, contributing to a zero-waste strategy. The novel fungal strain produced laccase with a maximum activity of 171.4 U/g after 6 days of solid-state fermentation using BSG as a substrate. The obtained laccase exhibited excellent performance in the decolorization of azo dyes, both as a free and immobilized, at high temperatures, without addition of harmful mediators, achieving maximum decolorization efficiencies of 99.0%, 71.2%, and 61.0% for Orange G (OG), Congo Red, and Eriochrome Black T (EBT), respectively. The immobilized laccase on BSG was successfully reused across five cycles of azo dye decolorization process. Notably, new green biocatalyst outperformed commercial laccase from Aspergillus spp. in the decolorization of OG and EBT. GC-MS and LC-MS revealed azo-dye degradation products and decomposition pathway. This analysis was complemented by antimicrobial and phytotoxicity tests, which confirmed the non-toxic nature of the degradation products, indicating the potential for safe environmental disposal.
Subject(s)
Azo Compounds , Laccase , Wastewater , Laccase/metabolism , Wastewater/chemistry , Coloring Agents/metabolismABSTRACT
Three newly synthesized triphenyltin(IV) compounds, Ph3SnL1 (L1- = 3-(4-methyl-2-oxoquinolin-1(2H)-yl)propanoato), Ph3SnL2 (L2- = 2-(4-methyl-2-oxoquinolin-1(2H)-yl)ethanoato), and Ph3SnL3 (L3- = 2-(4-hydroxy-2-oxoquinolin-1(2H)-yl)ethanoato), were characterized by elemental microanalysis, FT-IR spectroscopy and multinuclear (1H, 13C and 119Sn) NMR spectroscopy. A single X-ray diffraction study indicates that compounds Ph3SnL1 and Ph3SnL2 exhibit a 1D zig-zag chain polymeric structure, which in the case of Ph3SnL2 is additionally stabilized by π-interactions. In addition, the synthesized compounds were further examined using density functional theory and natural bond orbital analysis. The compounds have been evaluated for their in vitro anticancer activity against three human cell lines: MCF-7 (breast adenocarcinoma), A375 (melanoma), HCT116 (colorectal carcinoma), and three murine cell lines: 4T1 (breast carcinoma), B16 (melanoma), CT26 (colon carcinoma) using MTT and CV assays. The IC50 values fall in the nanomolar range, indicating that these compounds possess better anticancer activity than cisplatin. The study of the effect of the newly developed drug Ph3SnL1 showed its plasticity in achieving an antitumor effect in vitro, which depends on the specificity of the phenotype and the redox status of the malignant cell line and ranges from the initiation of apoptotic cell death to the induction of differentiation to a more mature cell form. In the syngeneic model of murine melanoma, Ph3SnL1 showed the potential to reduce the tumor volume similar to cisplatin, but in a well-tolerated form and with low systemic toxicity, representing a significant advantage over the conventional drug.
Subject(s)
Antineoplastic Agents , Drug Screening Assays, Antitumor , Organotin Compounds , Quinolones , Organotin Compounds/chemistry , Organotin Compounds/pharmacology , Organotin Compounds/chemical synthesis , Antineoplastic Agents/pharmacology , Antineoplastic Agents/chemistry , Antineoplastic Agents/chemical synthesis , Humans , Animals , Mice , Quinolones/chemistry , Quinolones/pharmacology , Quinolones/chemical synthesis , Cell Proliferation/drug effects , Cell Line, Tumor , Density Functional Theory , Molecular Structure , Structure-Activity Relationship , Cell Survival/drug effectsABSTRACT
This paper outlines a novel simple protocol for tuning the structure and properties of jute using sodium periodate (NaIO4) oxidation and coating with alginate. When compared to the raw jute, fabrics oxidized with a 0.2 or 0.4 % NaIO4 solution for 30-120 min exhibited an increased aldehyde group content (0.185 vs. 0.239-0.398 mmol/g), a significantly increased negative zeta potential (from -8.57 down to -20.12 mV), a slight disruption of fiber crystallinity, 15.1-37.5 % and 27.9-49.8 % lower fabric maximum force and stiffness, respectively. Owing to the removal of hydrophobic surface barrier, decreased crystallinity index and the presence of micropores on the fabrics' surfaces, oxidized fabrics have a 22.3-29.6 % improved ability for moisture sorption compared to raw fabric. Oxidized fabrics characterized by very long wetting times and excellent antioxidant activities (> 98 %), can find applications as hydrophobic packaging materials. To further extend the utilization of jute in biocarpet engineering such as water-binding geo-prebiotic supports, oxidized fabrics were coated with alginate resulting in 7.9-24.9 % higher moisture sorption and 352-660 times lower wetting times than their oxidized counterparts. This modification protocol has never been applied to lignocellulosic fibers and sheds new light on obtaining jute fabrics with tuned structure and properties intended for various applications.
Subject(s)
Alginates , Alginates/chemistry , Periodic Acid , Oxidation-Reduction , Hydrophobic and Hydrophilic InteractionsABSTRACT
Three new diphenyltin(IV) complexes, bis(3-(4-methyl-2-oxoquinolinyl-1(2H)-yl)propanoato)diphenyltin(IV) (1), bis(2-(4-methyl-2-oxoquinolin-1(2H)-yl)ethanoato)diphenyltin(IV) (2), and bis(2-(4-hydroxy-2-oxoquinolin-1(2H)-yl)ethanoato)diphenyltin(IV) (3), were synthesized and characterized by elemental microanalysis, FT-IR spectroscopy, and multinuclear (1H, 13C and 119Sn) NMR spectroscopy. Crystal structure of ligand precursor, 2-(4-methyl-2-oxoquinolinyl-1-(2H)-yl)acetic acid (HL2), has been determined by X-ray diffraction studies. Asymmetric bidentate coordination of the carboxylato ligands and skew trapezoidal structures are assumed for the synthesized complexes. In vitro anticancer activity of the synthesized diphenyltin(IV) complexes was evaluated against three human: MCF-7 (breast adenocarcinoma), A375 (melanoma), HCT116 (colorectal carcinoma), and three mouse tumor cell lines: 4T1 (breast carcinoma), B16 (melanoma), CT26 (colon carcinoma) using MTT and CV assays. The IC50 values fall in the range from 0.1 to 3.7 µM. Flow cytometric analysis and fluorescent microscopy suggest that complex 1 induces caspase-dependent apoptosis followed with strong blockade of cell division in HCT116 cells. Since complex 1 showed ROS/RNS scavenging potential mentioned cytotoxicity was not connected with oxidative stress.
Subject(s)
Antineoplastic Agents , Breast Neoplasms , Coordination Complexes , Melanoma , Humans , Animals , Mice , Female , Antineoplastic Agents/chemistry , Spectroscopy, Fourier Transform Infrared , Ligands , Cell Line, TumorABSTRACT
This study aimed to characterize mixtures of goat milk proteins and Agaricus blazei Murrill (ABM) extracts (aqueous, AE and polysaccharides, PE). The mixtures showed stable particles with ζ-potential more negative than -41.1 mV. The addition of AMB extracts to goat milk did not result in a significant particle size change, whereas their addition to heated goat milk significantly increased mean particle diameter (from 194 nm to 225 nm). Fourier Transform Infrared Spectroscopy (FTIR) showed that ABM extracts provoked changes in the secondary structure of goat milk proteins and interactions between polysaccharides and milk proteins predominantly via hydrogen and/or glycoside bonds and hydrophobic interactions. The milk protein profiles revealed proteolytic activity in mixtures with AE resulting in the formation of five new polypeptides. The different microstructures of mixtures with AE and PE were found by Scanning Electron Microscopy (SEM). A schematic representation of possible milk proteins-ABM extracts interactions has been given.
Subject(s)
Agaricus , Milk Proteins , Animals , Spectroscopy, Fourier Transform Infrared , Goats , Agaricus/chemistry , Polysaccharides/chemistry , Hydrogen , GlycosidesABSTRACT
A diluted ethanol orange peel extract was used for sustainable dyeing and functionalization of different fabrics. The extract analysis was performed using UPLC-ESI-MS/MS; its total flavonoid (0.67 g RE/100 g d.w.) and antioxidant (2.81 g GAE/100 g d.w.) contents and antioxidant activity (IC50 of 65.5 µg/mL) were also determined. The extract dyeing performance at various dyebath pH values was evaluated using multifiber fabric. Among six fabrics, extract possessed the ability for dyeing wool, polyamide, and cellulose acetate (at pH 4.5), which color strength (K/S) values increased after washing (9.7-19.8 vs. 11.6-23.2). Extract:water ratio of 20:35 (v/v) was found to be sufficient for achieving satisfactory K/S values (i.e., 20.17, 12.56, and 10.38 for wool, polyamide, and cellulose acetate, respectively) that were slightly changed after washing. The optimal dyeing temperatures for wool, polyamide, and cellulose acetate are 55, 35, and 25 °C, while the equilibrium dye exhaustion at those temperatures was achieved after 45, 120, and 90 min, respectively. The color coordinate measurements revealed that wool and polyamide fabrics are yellower than cellulose acetate, while, compared to polyamide and cellulose acetate, wool is redder. Possible interactions between selected fabrics and extract compounds are suggested. All fabrics possessed excellent antioxidant activity (88.6-99.6%) both before and after washing. Cellulose acetate provided maximum bacterial reduction (99.99%) for Escherichia coli, and Staphylococcus aureus, which in the case of Staphylococcus aureus remained unchanged after washing. Orange peel extract could be used for simultaneous dyeing and functionalization of wool and polyamide (excellent antioxidant activity) and cellulose acetate (excellent antioxidant and antibacterial activity) fabrics.
ABSTRACT
In order to improve the performance of theoretical UV-Vis spectra predictions, a theoretical and experimental study of solvatochromic properties of ten azo pyridone dyes has been performed. For quantitative estimation of intermolecular solvent-solute interactions, a concept of the linear solvation energy relationships has been applied using Kamlet-Taft and Catalán models. Theoretical UV-Vis spectra for all dyes have been calculated using four TD-DFT methods in nine different solvents with the aim to define the most reliable model. Finally, new polylinear equations for more accurate theoretical prediction of UV-Vis maxima are developed using empirical Kamlet-Taft and Catalán solvent parameters as additive corrections for specific and nonspecific solvent-solute interactions.
Subject(s)
Azo Compounds , Pyridones , Coloring Agents , SolventsABSTRACT
The inclusion complexes of the selected, potentially biologically active, succinimides with ß-cyclodextrin (µCD) and (2-hydroxypropyl)-ß-cyclodextrin (HPµCD) were prepared. the formation of the inclusion complexes of the investigated monophenyl and diphenyl succinimide derivatives was confirmed using attenuated total reflection (ATR) study. Their electrochemical behavior was examined by cyclic voltammetry (CV) and square wave voltammetry (SWV) in 0.05 M NaHCO3 on a gold electrode. The stability constants for compound 1 were determined by cyclic voltammetry and calculated as KµCD = 350.87 M-1 and KHPµCD = 250.67 M-1. The SWV measurements reveal well defined peak at potential Ep = ~ 60 mV and the higher currents at Ep for both inclusion complex of the succinimides compared to the free compounds. The impact of chlorine atom in the phenyl moiety of succinimide derivatives on the activity in electrooxidation reaction is presented. Among the studied succinimides, according to SWV measurements, the most active is the monophenyl succinimide derivative (compound 1) in complex with µCD. The difference of peak current of compound 1 + µCD compared to compound 1 + HPµCD and free compound is 6.3 and 35.2 µA cm-2, respectively.