Synthesis of gold-silver luminescent honeycomb aggregates by both solvent-based and solvent-free methods.

Heterometallic clusters with strong luminescence have been synthesized (see picture: Au(C≡CPh)(2)yellow-red, Ag(2)blue, Ored) from the metalloligand unit [Au(C≡CPh)PPh(3) ] (yellow/red bars) by using both standard solvent-based and solvent-free reactions. The aggregates are stabilized only by acetylide-metal or metal-metal interactions, and their nuclearity is controlled through the addition of different donor ligands.

Electrochemistry of sulfur and polysulfides in ionic liquids.

The electrochemistry of elemental sulfur (S(8)) and the polysulfides Na(2)S(4) and Na(2)S(6) has been studied for the first time in nonchloroaluminate ionic liquids. The cyclic voltammetry of S(8) in the ionic liquids is different to the behavior reported in some organic solvents, with two reductions and one oxidation peak observed. Supported by in situ UV-vis spectro-electrochemical experiments, the main reduction products of S(8) in [C(4)mim][DCA] ([C(4)mim] = 1-butyl-3-methylimidazolium; DCA = dicyanamide) have been identified as S(6)(2-) and S(4)(2-), and plausible pathways for the formation of these species are proposed. Dissociation and/or disproportionation of the polyanions S(6)(2-) and S(4)(2-) appears to be slow in the ionic liquid, with only small amounts of the blue radical species S(3)(•-) formed in the solutions at r.t., in contrast with that observed in most molecular solvents.

Electrochemistry of Hg(II) salts in room-temperature ionic liquids.

The electrochemistry of HgCl(2) and [Hg(NTf(2))(2)] ([NTf(2)](-)=bis-{(trifluoromethyl)sulfonyl}imide) has been studied in room temperature ionic liquids. It has been found that the cyclic voltammetry of Hg(II) is strongly dependent on a number of factors (e.g., concentration, anions present in the mixture, and nature of the working electrode) and differs from that found in other media. Depending on conditions, the cyclic voltammetry of Hg(II) can give rise to one, two, or four reduction peaks, whereas the reverse oxidative scans show two to four peaks. Diffuse reflectance UV-vis spectroscopy and X-ray powder diffraction have been used to aid the assignment of the voltammetric waves.

Multiple evidence for gold(I)...silver(I) interactions in solution.

[AuAg3(C6F5)(CF3CO2)3(CH2PPh3)]n (2) was prepared by reaction of [Au(C6F5)(CH2PPh3)] (1) and [Ag(CF3CO2)] (1:3). The crystal structures of complexes 1 and 2 were determined by X-ray diffraction, and the latter shows a polymeric 2D arrangement built by Au...Ag, Ag...Ag, and Ag...O contacts. The metallophilic interactions observed in 2 in the solid state seem to be preserved in concentrated THF solutions, as suggested by EXAFS, pulsed-gradient spin-echo NMR, and photophysical studies, which showed that the structural motif [AuAg3(C6F5)(CF3CO2)3(CH2PPh3)] is maintained under such conditions. Time-dependent DFT calculations agree with the experimental photophysical energies and suggest a metal-to-ligand charge-transfer phosphorescence process. Ab initio calculations give an estimated interaction energy of around 60 kJ mol(-1) for each Au...Ag interaction.

A new approach for the detection of ethylene using silica-supported palladium complexes.

The coordination of olefins to square-planar Pd(II) and Pt(II) complexes containing 2,9-dimethylphenanthroline ( L1) often involves a change of color associated with a change of geometry at the metal center. In order to obtain suitable colorimetric detectors for ethylene gas, a series of new Pd(II) and Pt(II) compounds with a range of 2,9-disubstituted phenanthroline ligands [2,9-di- n-butyl-1,10-phenanthroline ( L2), 2,9-di- s-butyl-1,10-phenanthroline ( L3), 2,9-diphenyl-1,10-phenanthroline ( L4), and 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bathocuproine, L5)] have been prepared and their reactivity toward ethylene investigated both in solution and after depositing the detector compounds on a variety of solid supports. The Pd(II) complex [PdCl 2( L2)] supported on silica undergoes a clear color change upon exposure to ethylene, while remaining stable toward air and water, and forms the basis for new simple colorimetric detectors with potential applications in ethylene pipe-leak detection and the monitoring of fruit ripening. Encouragingly, the detector is able to discriminate between fruit at different stages of ripening. The response of the detector to other volatiles was also examined, and specific color changes were also observed upon exposure to aromatic acetylenes. The crystal structures of four new derivatives, including the ethylene-Pt(II) complex [PtCl 2(C 2H 4)( L2)], are also described.

Preparation of AgX (X = Cl, I) nanoparticles using ionic liquids.

Nanoparticles of silver halides have been prepared by mixing silver halide powder with a single liquid phase consisting of an ionic liquid, isooctane, n-decanol and water. Much higher nanoparticle concentrations may be formed with ionic liquids using this new simple method than are found with conventionally applied surfactants. This method also emphasizes the applicability of ionic liquids as versatile components in microemulsions and as solvents for the synthesis of nanomaterials. The effect on the nanoparticles of changing the composition of the liquid mixtures and the nature of the ionic liquid is analysed. High nanoparticle concentrations were only found with chloride based ionic liquids, indicating the importance of the ionic liquid anion in the mechanism of the reaction.

An electrochemical study of PCl3 and POCl3 in the room temperature ionic liquid [C4mpyrr][N(Tf)2].

Voltammetric studies of PCl3 and POCl3 have not been reported in the literature to date, probably due to the instability of these molecules in conventional aprotic solvents giving unstable and irreproducible results. From a previous study [Amigues et al. Chem. Commun. 2005, 1-4], it was found that ionic liquids have the ability to offer a uniquely stable solution phase environment for the study of these phosphorus compounds. Consequently, the electrochemistry of PCl3 and POCl3 has been studied by cyclic voltammetry on a gold microelectrode in the ionic liquid [C4mpyrr][N(Tf)2] (1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide). For both compounds, reduction and oxidation waves were observed and a tentative assignment of the waves is given. For PCl3, the reduction was thought to proceed via the following mechanism: PCl3 + e- <=> PCl3-, PCl3- <=> Cl- + P*Cl2, and Cl- + PCl3 <=> PCl4-. For POCl3, the suggested reduction mechanism was analogous to that of PCl3: POCl3 + e- <=> POCl3-, POCl3- <=> Cl- + P*OCl2, and Cl- + POCl3 <=> POCl4-. In both cases P*Cl2 and P*OCl2 are likely to engage in further reactions. Potential step microdisk chronoamperometry was carried out on the reductive waves of PCl3 and POCl3 to measure diffusion coefficients and number of electrons transferred. It was found that the diffusion of PCl3 was unusually slow (3.1 x 10(-12) m2 s(-1)): approximately 1 order of magnitude less than that for POCl3 (2.2 x 10(-11) m2 s(-1)). For both PCl3 and POCl3, a "split wave" was observed, with an overall electron count of 1. This observation is shown to be consistent with and to "fingerprint" the mechanisms proposed above.

A new type of luminescent alkynyl Au4Cu2 cluster.

Changes in the optical properties of an alkynyldigold(I) complex upon reaction with Cu(I) are associated with a complicated structural change to form an unusual Au4Cu2 cluster with metallophilic interactions as well as pi-alkyne coordination.

First EXAFS studies on aurophilic interactions in solution.

EXAFS has been used to directly show the existence of Au...Au interactions in dissolved Au(I) complexes for the first time; the information has been used to understand the optical properties of these materials.

A family of Au-Tl loosely bound butterfly clusters.

By treatment of the polymeric species [AuTl(C6Cl5)2]n with ketones or with acetylacetone and 4,4'-bipyridine, the new tetranuclear complexes [Au2Tl2(C6Cl5)4] x L (L = PhMeC=O, acacH) or [Au2Tl2(C6Cl5)4(bipy)] x (acacH) have been prepared. Their crystal structures have been determined by X-ray diffraction methods and they all present a central Au2Tl2 core formed via one Tl...Tl and four Au...Tl unsupported interactions resulting in a loosely bound butterfly cluster. These complexes are strongly luminescent in both the solid state and solution showing an optical behavior in agreement with the maintenance of the Tl...Tl contact even in solution.

Effects of diphosphine structure on aurophilicity and luminescence in Au(I) complexes.

The effects of diphosphine flexibility and bite angle on the structures and luminescence properties of Au(I) complexes have been investigated. A range of diphosphines based on heteroaromatic backbones [bis(2-diphenylphosphino)phenylether (dpephos), 9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene (xantphos), and 4,6-bis(diphenylphosphino)dibenzofuran (dbfphos)] has been used to prepare mono- and digold derivatives. A clear relationship between the presence of aurophilic contacts and the emission properties of dinuclear complexes has been observed, with one of the complexes studied, [Au(2)Cl(2)(micro-xantphos)], exhibiting luminescence thermochromism.