Development of double porous poly (ε - caprolactone)/chitosan polymer as tissue engineering scaffold.

Polymer blend made from poly(ε - caprolactone)/chitosan (PCL/CHT) offers interesting opportunities for biological applications. The paper presents a new way to fabricate PCL/CHT double-porosity (macrovoids with interconnected microporosity) membrane materials from a chemical optimization of the solvent and non-solvent phases and from a modified phase inversion technique. By varying the PCL/CHT proportion, it is shown that it is possible to improve the chemical and physical properties of the CHT carbohydrate polymer. The PCL/CHT membranes are fully characterized in term of physico-chemical properties (ATR-FTIR, XRD and DSC) to understand the miscibility of the two-polymer blend. Morphological characterization by SEM shows that by increasing CHT wt% in the blend, the size of the macrovoids was increasing. Rapid enzymatic degradation of PCL from all the blend was found by using lipase (from P. cepacia). The mechanisms at the origin of the morphological structuration of the material is also discussed. To test the ability to operate these materials as small diameter vascular scaffolds, cell culture with human umbilical vein endothelial cells (HUVECs) were carried out on the membrane and the results analyzed with laser scanning confocal microscopy (LSCM). Data suggest that the blend membrane with higher concentration of CHT polymer wt% have suitable properties that promote high number of cells on the surface by maintaining cellular cytoskeleton integrity within 3 days. The blend membrane with a double porous morphology could be potentially applicable in future for small diameter vascular graft application. The surface macrovoids (20-90 µm) could be useful for three-dimensional cellular adhesion and proliferation and interconnected microporous spongy network (7-20 µm) is expected to transfer essential nutrients, oxygen, growth factor between the macrovoids and the supernatant.

Double porous poly (Ɛ-caprolactone)/chitosan membrane scaffolds as niches for human mesenchymal stem cells.

In this paper, we developed membrane scaffolds to mimic the biochemical and biophysical properties of human mesenchymal stem cell (hMSC) niches to help direct self-renewal and proliferation providing to cells all necessary chemical, mechanical and topographical cues. The strategy was to create three-dimensional membrane scaffolds with double porosity, able to promote the mass transfer of nutrients and to entrap cells. We developed poly (Ɛ-caprolactone) (PCL)/chitosan (CHT) blend membranes consisting of double porous morphology: (i) surface macrovoids (big pores) which could be easily accessible for hMSCs invasion and proliferation; (ii) interconnected microporous network to transfer essential nutrients, oxygen, growth factors between the macrovoids and throughout the scaffolds. We varied the mean macrovoid size, effective surface area and surface morphology by varying the PCL/CHT blend composition (100/0, 90/10, 80/20, 70/30). Membranes exhibited macrovoids connected with each other through a microporous network; macrovoids size increased by increasing the CHT wt%. Cells adhered on the surfaces of PCL/CHT 100/0 and PCL/CHT 90/10 membranes, that are characterized by a high effective surface area and small macrovoids while PCL/CHT 80/20 and PCL/CHT 70/30 membranes with large macrovoids and low effective surface area entrapped cells inside macrovoids. The scaffolds were able to create a permissive environment for hMSC adhesion and invasion promoting viability and metabolism, which are important for the maintenance of cell integrity. We found a relationship between hMSCs proliferation and oxygen uptake rate with surface mean macrovoid size and effective surface area. The macrovoids enabled the cell invasion into the membrane and the microporosity ensured an adequate diffusive mass transfer of nutrients and metabolites, which are essential for the long-term maintenance of cell viability and functions.

Tunable Microstructured Membranes in Organs-on-Chips to Monitor Transendothelial Hydraulic Resistance.

Tissue engineering is an interdisciplinary field, wherein scientists from different backgrounds collaborate to address the challenge of replacing damaged tissues and organs through the in vitro fabrication of functional and transplantable biological structures. Because the development and optimization of tissue engineering strategies rely on the complex interaction of cells, materials, and the physical-chemical tissue microenvironment, there is a need for experimental models that allow controlled studies of these aspects. Organs-on-chips (OOCs) have recently emerged as in vitro models that capture the complexity of human tissues in a controlled manner, while including functional readouts related to human organ physiology. OOCs consist of multiple microfluidic cell culture compartments, which are interfaced by porous membranes or hydrogels in which human cells can be cultured, thereby providing a controlled culture environment that resembles the microenvironment of a certain organ, including mechanical, biochemical, and geometrical aspects. Because OOCs provide both a well-controlled microenvironment and functional readouts, they provide a unique opportunity to incorporate, evaluate, and optimize materials for tissue engineering. In this study, we introduce a polymeric blend membrane with a three-dimensional double-porous morphology prepared from a poly(ɛ-caprolactone)-chitosan blends (PCL-CHT) by a modified liquid-induced phase inversion technique. The membranes have different physicochemical, microstructural, and morphological properties depending on different PCL-CHT ratios. Big surface pores (macrovoids) provide a suitable microenvironment for the incorporation of cells or growth factors, whereas an interconnected small porous (macroporous) network allows transfer of essential nutrients, diffusion of oxygen, and removal of waste. Human umbilical vein endothelial cells were seeded on the blend membranes embedded inside an OOC device. The cellular hydraulic resistance was evaluated by perfusing culture medium at a realistic transendothelial pressure of 20 cmH2O or 2 kPa at 37°C after 1 and 3 days postseeding. By introducing and increasing CHT weight percentage, the resistance of the cellular barrier after 3 days was significantly improved. The high tuneability over the membrane physicochemical and architectural characteristics might potentially allow studies of cell-matrix interaction, cell transportation, and barrier function for optimization of vascular scaffolds using OOCs. Impact Statement Organs-on-chips (OOCs) offer interesting potential for progress in the treatment of diseases and injury in the growing field of tissue engineering and regenerative medicine. The article presents a new way to develop polymer membrane with a tunable microstructured morphology and to implement this biomaterial inside an OOC device. The reader should find measurements of the transendothelial hydraulic resistance in real time during endothelial cells culture: a simple and controlled way of mimicking human physiological condition for vascular tissue regeneration. This combination of novel biomaterial inside an OOC will explore innovative ideas in tissue engineering field.

Influence of the Counterion Nature on the Stability Sequence of Hydrophobic Latex Particles.

The aggregation kinetics of negatively charged polystyrene latex particles in the presence of monovalent electrolytes have been investigated. The inferred coagulation critical concentrations were compared to establish the stability sequence. With the same representative co-ions, this sequence is reversed when using kosmotrope sodium and chaotrope potassium cations. The results have been ascribed to a variable competition of the co-ions toward the hydrophobic surface depending on the lyotropic nature of the associated counterion. They provide new insights into the implication of ionic specificity in the stability behavior of aqueous dispersions of charged colloids.

Wet air oxidation of formic acid using nanoparticle-modified polysulfone hollow fibers as gas-liquid contactors.

Catalytic wet air oxidation (CWAO) using membrane contactors is attractive for remediation of aqueous pollutants, but previous studies of even simple reactions such as formic acid oxidation required multiple passes through tubular ceramic membrane contactors to achieve high conversion. This work aims to increase single-pass CWAO conversions by using polysulfone (PS) hollow fibers as contactors to reduce diffusion distances in the fiber lumen. Alternating adsorption of polycations and citrate-stabilized platinum colloids in fiber walls provides catalytically active PS hollow fibers. Using a single PS fiber, 50% oxidation of a 50 mM formic acid feed solution results from a single pass through the fiber lumen (15 cm length) with a solution residence time of 40 s. Increasing the number of PS fibers to five while maintaining the same volumetric flow rate leads to over 90% oxidation, suggesting that further scale up in the number of fibers will facilitate high single pass conversions at increased flow rates. The high conversion compared to prior studies with ceramic fibers stems from shorter diffusion distances in the fiber lumen. However, the activity of the Pt catalyst is 20-fold lower than in previous ceramic fibers. Focusing the Pt deposition near the fiber lumen and limiting pore wetting to this region might increase the activity of the catalyst.

Use of lanthanide-grafted inorganic nanoparticles as effective contrast agents for cellular uptake imaging.

The improvement of commonly used Gd3+ -based MRI agents requires the design of new systems with optimized in vivo efficacy, pharmacokinetic properties, and specificity. To design these contrast agents, two parameters are usually considered: increasing the number of coordinated water molecules or increasing the rotational correlation time by increasing molecular weight and size. This has been achieved by noncovalent or covalent binding of low-molecular weight Gd3+ chelates to macromolecules or polymers. The grafting of these high-spin paramagnetic gadolinium chelates on metal oxide nanoparticles (SiO2, Al2O3) is proposed. This new synthetic strategy presents at least two main advantages: (1) a high T1-relaxivity for MRI with a 275% increase of the MRI signal and (2) the ability of nanoparticles to be internalized in cells. Results indicate that these new contrast agents lead to a huge reconcentration of Gd3+ paramagnetic species inside microglial cells. This reconcentration phenomenon gives rise to high signal-to-noise ratios on MR images of cells after particle internalization, from 1.4 to 3.75, using Al2O3 or SiO2 particles, respectively. The properties of these new particles will be further used to get new insight into gene therapy against glioma, using microglial cells as vehicles to simultaneously transport a suicide gene and contrast agents. Since microglia are chemoattracted to brain tumors, the presence of these new contrast agents inside the cells will lead to a better MRI determination of the in vivo location, shape, and borders of the tumors. These Gd3+-loaded microglia can therefore provide effective localization of tumors by MRI before applying any therapeutic treatment. The rate of carcinoma remission following a suicide gene strategy is also possible.