Bisphenol A Diglycidyl Ether-Primary Amine Cooligomer-poly(ε-caprolactone) Networks: Synthesis and Characterization.

In this work, the preparation and systematic investigation of cross-linked polyurethane-epoxy (PU-EP) polymer systems are reported. The PU-EP polymers were prepared using a reaction of isocyanate (NCO)-terminated PU-prepolymer with diglycidyl ether of bisphenol A (DGEBA)-amine cooligomer. The oligomerization of DGEBA was carried out by adding furfurylamine (FA) or ethanolamine (EA), resulting in DGEBA-amine cooligomers. For the synthesis of NCO-terminated PU-prepolymer, poly(ε-caprolactone)diol (PCD) (Mn = 2 kg/mol) and 1,6-hexamethylene diisocyanate (HDI) were used. The cross-linking was achieved by adding DGEBA-amine cooligomer to PU-prepolymer, in which the obtained urethane bonds, due to the presence of free hydroxil groups in the activated DGEBA, served as netpoints. During cross-linking, ethanolamine provides an additional free hydroxyl group for the formation of a new urethane bond, while furfurylamine can serve as a thermoreversible coupling element (e.g., Diels-Alder adduct). The PU-EP networks were characterized using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and scanning electron microscopy (SEM). The DMA curves of some PU-EPs (depending on the compositions and the synthetic method) revealed a plateau-like region above the melting temperature (Tm) of PCD, confirming the presence of a cross-linked structure. This property resulted in a shape memory (SM) behavior for these samples, which can be fine-tuned in the presence of furfurylamine through the formation of additional thermoreversible bonds (e.g., Diels-Alder adduct).

Flourishing Together: The Longitudinal Effect of Goal Coordination on Goal Progress and Life Satisfaction in Romantic Relationships.

Goal pursuit shapes people' everyday experiences and is deeply embedded within close relationships. Several studies have shown that goal support from romantic partners facilitates goal progress, and individual goal progress contributes to wellbeing. However, few pieces of research have examined the whole process, how efficient goal coordination in a romantic relationship contributes to life satisfaction through goal progress. In these studies, short time frames were used and only one aspect of goal coordination was examined. To generate more complex, long-term understanding we collected data from 148 married or cohabitating Hungarian heterosexual couples (mean age 39.71 ± 10.40 and 38.57 ± 10.00 years for men and women, respectively) in a two-wave longitudinal study with a year-long time window. Both partners individually completed an adapted version of the Personal Project Assessment and evaluated four chosen projects associated with project coordination (emotional support, communication, and cooperation) at baseline, and project attainment (progress, success, satisfaction) in the follow up. Life satisfaction was assessed during both waves. Results from the actor-partner interdependence mediation modeling revealed complete mediation, where project coordination increased project attainment one year later, and consequently associated with higher life satisfaction for both partners. The direct effect between project coordination and life satisfaction remained nonsignificant. This association indicates that for long-term life satisfaction, it is crucial to experience better goal outcomes as the result of the couple's collaborative effort.

Novel Polyurethane Scaffolds Containing Sucrose Crosslinker for Dental Application.

In this paper, the synthesis, characterization, and properties of crosslinked poly(ε-caprolactone)-based polyurethanes as potential tissue replacement materials are reported. The polyurethane prepolymers were prepared from poly(ε-caprolactone)diol (PCD), polyethylene glycol (PEG)/polylactic acid diol (PLAD), and 1,6-hexamethylene diisocyanate (HDI). In these segmented polyurethanes, the role of PEG/PLAD was to tune the hydrophobic/hydrophilic character of the resulting polymer while sucrose served as a crosslinking agent. PLAD was synthesized by the polycondensation reaction of D,L-lactic acid and investigated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and nuclear magnetic resonance spectroscopy (NMR). The crosslinked polyurethane samples (SUPURs) obtained were characterized by attenuated total reflectance Fourier-transform infrared spectroscopy (AT-FT-IR), swelling, and mechanical (uniaxial tensile tests) experiments. The thermo and thermomechanical behavior were studied by differential scanning calorimetry (DSC) and dynamical mechanical analysis (DMA). The viability of dental pulp stem cells was investigated in the case of polyurethanes composed of fully biocompatible elements. In our studies, none of our polymers showed toxicity to stem cells (DPSCs).

Synthesis of Sucrose-HDI Cooligomers: New Polyols for Novel Polyurethane Networks.

Sucrose-1,6-hexamethylene diisocyanate (HDI) cooligomers were synthesized and used as new polyols for poly(ε-caprolactone) (PCL)-based polyurethanes. The polyaddition reaction of sucrose and HDI was monitored by MALDI-TOF MS. It was found that by selecting appropriate reaction conditions, mostly linear oligomer chains containing 16 sucrose units could be obtained. For the synthesis of polyurethane networks, prepolymers were prepared by the reaction of poly(ε-caprolactone) (PCL, 10 kg/mol) with HDI or 4,4'-methylene diphenyl diisocyanate (MDI) and were reacted with sucrose-HDI cooligomers. The so-obtained sucrose-containing polyurethanes were characterized by means of attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FT IR), swelling, mechanical (uniaxial tensile tests) and differential scanning calorimetry (DSC).

Kinetically Equivalent Functionality and Reactivity of Commonly Used Biocompatible Polyurethane Crosslinking Agents.

In this paper, the kinetics of the reaction of phenyl isocyanate with crosslinking agents such as sucrose, sorbitol, and glycerol are reported. Crosslinking agents were used in high molar excess to isocyanate to obtain pseudo-first-order rate dependencies, and the reaction products were separated by high-performance liquid chromatography and detected by UV spectroscopy and mass spectrometry. It was found that the glycerol's primary hydroxyl groups were approximately four times reactive than the secondary ones. However, in the case of sorbitol, the two primary OH groups were found to be the most reactive, and the reactivity of hydroxyl groups decreased in the order of kOH(6)(8.43) > kOH(1)(6.91) > kOH(5)(1.19) > kOH(2)(0.98) > kOH(3)(0.93) > kOH(4)(0.64), where the numbers in the subscript and in the brackets denote the position of OH groups and the pseudo-first-order rate constants, respectively. The Atomic Polar Tenzor (APT) charges of OH groups and dipole moments of monosubstituted sorbitol derivatives calculated by density functional theory (DFT) also confirmed the experimental results. On the other hand, the reactions of phenyl isocyanate with crosslinking agents were also performed using high excess isocyanate in order to determine the number of OH-groups participating effectively in the crosslinking process. However, due to the huge number of derivatives likely formed in these latter reactions, a simplified reaction scheme was introduced to describe the resulting product versus reaction time distributions detected by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS). Based on the results, the kinetically equivalent functionality (fk) of each crosslinking agent was determined and found to be 2.26, 2.6, and 2.96 for glycerol, sorbitol, and sucrose, respectively.

Block Copolymers of Poly(ω-Pentadecalactone) in Segmented Polyurethanes: Novel Biodegradable Shape Memory Polyurethanes.

In this report, the synthesis of poly(ω-pentadecalactone) (PPDL) (co)polymers and their incorporation into polyurethanes (PUs) are reported. Optimal conditions for the ring-opening polymerization (ROP) of ω-pentadecalactone (PDL) using dibutyltin dilaurate catalyst were established. For the synthesis of linear and crosslinked PUs, 50 kDa poly(ε-caprolactone) (PCL) and 1,6-hexamethylenediisocyanate (HDI) were used. The obtained polyurethanes were characterized by Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (AT-FTIR), differential scanning calorimetry (DSC), and dynamical mechanical analysis (DMA). The DMA of the selected sample showed a rubbery plateau on the storage modulus versus temperature curve predicting shape memory behavior. Indeed, good shape memory performances were obtained with shape fixity (Rf) and shape recovery (Rr) ratios.

[Attachment style, relationship and sexual satisfaction: comparing breast cancer patients and healthy women]. / Kötodési stílus, kapcsolati és szexuális elégedettség: emlorákos és egészséges nok összehasonlító vizsgálata.

Introduction: Many studies have investigated attachment styles in adults diagnosed with breast cancer: previous results indicate the importance of considering the associations between attachment style and relationship functioning in order to support better quality of life and optimal healing process in patients. Aim and method: In this study we intend to assess the attachment style (anxiety and avoidance) of Hungarian women diagnosed with breast cancer (n = 135) and to compare it with a group of women not diagnosed with cancer (n = 137). We examined attachment style in relation to self-rated health as well as relational and sexual satisfaction. Results: In the diagnosed group, we found higher level of avoidant attachment as well as poorer self-rated health, and lower relationship and sexual satisfaction. Both higher avoidance and anxiety predicted lower relationship satisfaction, while sexual satisfaction was predicted by having a breast cancer diagnosis and better self-rated health. Conclusion: Our results indicate that the attachment pattern of women diagnosed with cancer can play a role in their relationships and sexual satisfaction, along with their subjective health status. Monitoring and supporting physical, mental and relational characteristics may contribute to the attainment of better quality of life. Orv Hetil. 2020; 161(13): 510-518.

One-Pot Synthesis and Characterization of Novel Shape-Memory Poly(ε-Caprolactone) Based Polyurethane-Epoxy Co-networks with Diels⁻Alder Couplings.

The present work aimed at the preparation and investigation of different epoxy-polyurethane (EP-PU) co-networks. The EP-PU co-networks were obtained by applying two different synthetic strategies, in which the coupling element, the Diels⁻Alder (DA) adduct, was prepared previously or formed "in situ" in the reaction between furan functionalized polyurethane and furfuryl amine-diglycidyl ether bisphenol-A oligomers (FA_DGEBA). For the synthesis of these EP-PU networks, poly(ε-caprolactone)-diol (PCD, Mn = 2 kg/mol) and poly(ε-caprolactone) (PCL) with different molecular weights (Mn = 10, 25 and 50 kg/mol) and 1,6-hexamethylenediisocyanate (HDI) were used. The EP-PU co-networks were characterized by Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (AT-FT-IR), differential scanning calorimetry (DSC) and dynamical mechanical analysis (DMA). Scanning electron microscopy (SEM) was applied to assess the morphology of the EP-PU samples. It was demonstrated that the stress⁻strain curves for the EP-PUs could be interpreted based on the Standard Linear Solid (SLS) model. The DMA traces of some EP-PUs (depending on the composition and the synthetic method) revealed a plateau-like region above the melting temperature (Tm) of PCL confirming the presence of cross-linked structure. This feature predicted shape memory (SM) behavior for these EP-PU samples. Indeed, very good shape fixity and moderate shape recovery were obtained. The shape recovery processes of these EP-PU samples were described using double exponential decay functions.