Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 23
Filter
Add more filters










Publication year range
1.
Perfusion ; : 2676591241260179, 2024 Jun 06.
Article in English | MEDLINE | ID: mdl-38843822

ABSTRACT

Background: Antithrombin (AT) replacement is occasionally utilized in the setting of extracorporeal membrane oxygenation (ECMO)-associated heparin resistance. Although past studies emphasized the high costs and limited clinical benefit of AT supplementation,  guidance on strategies to prevent unnecessary use remain lacking.Methods: In this retrospective study, we evaluated the cost, efficacy, and safety outcomes three years pre- and post-implementation of an AT restriction protocol in adult ECMO patients. The primary endpoint was the cost spent on anticoagulation and AT normalized to ECMO duration. Secondary endpoints included thromboembolic and bleeding outcomes.Results: 175 patients were included for analysis (pre-restriction protocol n = 87; post-restriction protocol n = 88). Implementation of the restriction resulted in complete elimination of AT use and significantly reduced the primary cost endpoint from $1009.20 to $42.99 per ECMO day (p < .001). There was no significant change in occurrence of new Venous Thromboembolism (VTE) (p = .099). Those in the pre-implementation group had significantly higher rates of transfusions (p < .001) and ISTH major bleeding (p < .001). Outcomes remained significant after exclusion of patients with coronavirus infections.Conclusion: Results of this study exemplify how AT restriction can be successfully implemented to decrease anticoagulation-associated costs without jeopardizing the risk of bleeding and thrombosis in ECMO patients.

2.
Small ; : e2400057, 2024 Mar 22.
Article in English | MEDLINE | ID: mdl-38519846

ABSTRACT

A simple and precious-metal free photosystem for the reduction of aqueous CO2 to syngas (CO and H2) is reported consisting of carbon dots (CDs) as the sole light harvester together with a molecular cobalt bis(terpyridine) CO2 reduction co-catalyst. This homogeneous photocatalytic system operates in the presence of a sacrificial electron donor (triethanolamine) in DMSO/H2O solution at ambient temperature. The photocatalytic system exhibits an activity of 7.7 ± 0.2 mmolsyngas gCDs -1 (3.6 ± 0.2 mmolCO gCDs -1 and 4.1 ± 0.1 mmolH2 gCDs -1) after 24 hours of full solar spectrum irradiation (AM 1.5G). Spectroscopic and electrochemical characterization supports that this photocatalytic performance is attributed to a favorable association between CDs and the molecular cobalt catalyst, which results in improved interfacial photoelectron transfer and catalytic mechanism. This work provides a scalable and inexpensive platform for the development of CO2 photoreduction systems using CDs.

3.
Chimia (Aarau) ; 77(3): 154-158, 2023 Mar 29.
Article in English | MEDLINE | ID: mdl-38047820

ABSTRACT

The Catalysis Hub - Swiss CAT+ is a new infrastructure project funded by ETH-domain, co-headed by EPFL and ETHZ. It offers the scientific community a unique integrated technology platform combining automated and high-throughput experimentation with advanced computational data analysis to accelerate the discoveries in the field of sustainable catalytic technologies. Divided into two hubs of expertise, homogeneous catalysis at EPFL and heterogeneous catalysis at ETHZ, the platform is open to academic and private research groups. Following a multi-year investment plan, both hubs have acquired and developed several high-end robotic platforms devoted to the synthesis, characterization, and testing of large numbers of molecular and solid catalysts. The hardware is associated with a fully digitalized experimental workflow and a specific data management strategy to support closed-loop experimentation and advanced computational data analysis.

4.
Green Chem ; 25(24): 10611-10621, 2023 Dec 11.
Article in English | MEDLINE | ID: mdl-38089755

ABSTRACT

The simultaneous upcycling of all components in lignocellulosic biomass and the greenhouse gas CO2 presents an attractive opportunity to synthesise sustainable and valuable chemicals. However, this approach is challenging to realise due to the difficulty of implementing a solution process to convert a robust and complex solid (lignocellulose) together with a barely soluble and stable gas (CO2). Herein, we present the complete oxidative valorisation of lignocellulose coupled to the reduction of low concentration CO2 through a three-stage fractionation-photocatalysis-electrolysis process. Lignocellulose from white birch wood was first pre-treated using an acidic solution to generate predominantly cellulosic- and lignin-based fractions. The solid cellulosic-based fraction was solubilised using cellulase (a cellulose depolymerising enzyme), followed by photocatalytic oxidation to formate with concomitant reduction of CO2 to syngas (a gas mixture of CO and H2) using a phosphonate-containing cobalt(ii) bis(terpyridine) catalyst immobilised onto TiO2 nanoparticles. Photocatalysis generated 27.9 ± 2.0 µmolCO gTiO2-1 (TONCO = 2.8 ± 0.2; 16% CO selectivity) and 147.7 ± 12.0 µmolformate gTiO2-1 after 24 h solar light irradiation under 20 vol% CO2 in N2. The soluble lignin-based fraction was oxidised in an electrolyser to the value-added chemicals vanillin (0.62 g kglignin-1) and syringaldehyde (1.65 g kglignin-1) at the anode, while diluted CO2 (20 vol%) was converted to CO (20.5 ± 0.2 µmolCO cm-2 in 4 h) at a Co(ii) porphyrin catalyst modified cathode (TONCO = 707 ± 7; 78% CO selectivity) at an applied voltage of -3 V. We thus demonstrate the complete valorisation of solid and a gaseous waste stream in a liquid phase process by combining fractioning, photo- and electrocatalysis using molecular hybrid nanomaterials assembled from earth abundant elements.

5.
J Am Chem Soc ; 145(37): 20355-20364, 2023 Sep 20.
Article in English | MEDLINE | ID: mdl-37671930

ABSTRACT

Plastic upcycling through catalytic transformations is an attractive concept to valorize waste, but the clean and energy-efficient production of high-value products from plastics remains challenging. Here, we introduce chemoenzymatic photoreforming as a process coupling enzymatic pretreatment and solar-driven reforming of polyester plastics under mild temperatures and pH to produce clean H2 and value-added chemicals. Chemoenzymatic photoreforming demonstrates versatility in upcycling polyester films and nanoplastics to produce H2 at high yields reaching ∼103-104 µmol gsub-1 and activities at >500 µmol gcat-1 h-1. Enzyme-treated plastics were also used as electron donors for photocatalytic CO2-to-syngas conversion with a phosphonated cobalt bis(terpyridine) catalyst immobilized on TiO2 nanoparticles (TiO2|CotpyP). Finally, techno-economic analyses reveal that the chemoenzymatic photoreforming approach has the potential to drastically reduce H2 production costs to levels comparable to market prices of H2 produced from fossil fuels while maintaining low CO2-equivalent emissions.

6.
Angew Chem Int Ed Engl ; 62(20): e202215894, 2023 May 08.
Article in English | MEDLINE | ID: mdl-36888559

ABSTRACT

Formate production via both CO2 reduction and cellulose oxidation in a solar-driven process is achieved by a semi-artificial biohybrid photocatalyst consisting of immobilized formate dehydrogenase on titanium dioxide (TiO2 |FDH) producing up to 1.16±0.04 mmolformate g TiO 2 ${{_{\ {\rm TiO}{_{2}}}}}$ -1 in 24 hours at 30 °C and 101 kPa under anaerobic conditions. Isotopic labeling experiments with 13 C-labeled substrates support the mechanism of stoichiometric formate formation through both redox half-reactions. TiO2 |FDH was further immobilized on hollow glass microspheres to perform more practical floating photoreforming allowing vertical solar light illumination with optimal light exposure of the photocatalyst to real sunlight. Enzymatic cellulose depolymerization coupled to the floating photoreforming catalyst generates 0.36±0.04 mmolformate per m2 irradiation area after 24 hours. This work demonstrates the synergistic solar-driven valorization of solid and gaseous waste streams using a biohybrid photoreforming catalyst in aqueous solution and will thus provide inspiration for the development of future semi-artificial waste-to-chemical conversion strategies.

7.
ACS Catal ; 12(21): 13360-13371, 2022 Nov 04.
Article in English | MEDLINE | ID: mdl-36366764

ABSTRACT

Ethylene is an important feedstock in the chemical industry, but currently requires production from fossil resources. The electrocatalytic oxidative decarboxylation of succinic acid offers in principle an environmentally friendly route to generate ethylene. Here, a detailed investigation of the role of different carbon electrode materials and characteristics revealed that a flat electrode surface and high ordering of the carbon material are conducive for the reaction. A range of electrochemical and spectroscopic approaches such as Koutecky-Levich analysis, rotating ring-disk electrode (RRDE) studies, and Tafel analysis as well as quantum chemical calculations, electron paramagnetic resonance (EPR), and in situ infrared (IR) spectroscopy generated further insights into the mechanism of the overall process. A distinct reaction intermediate was detected, and the decarboxylation onset potential was determined to be 2.2-2.3 V versus the reversible hydrogen electrode (RHE). Following the mechanistic studies and electrode optimization, a two-step bio-electrochemical process was established for ethylene production using succinic acid sourced from food waste. The initial step of this integrated process involves microbial hydrolysis/fermentation of food waste into aqueous solutions containing succinic acid (0.3 M; 3.75 mmol per g bakery waste). The second step is the electro-oxidation of the obtained intermediate succinic acid to ethylene using a flow setup at room temperature, with a productivity of 0.4-1 µmol ethylene cmelectrode -2 h-1. This approach provides an alternative strategy to produce ethylene from food waste under ambient conditions using renewable energy.

9.
J Am Chem Soc ; 144(21): 9399-9412, 2022 06 01.
Article in English | MEDLINE | ID: mdl-35594410

ABSTRACT

Light-driven conversion of CO2 to chemicals provides a sustainable alternative to fossil fuels, but homogeneous systems are typically limited by cross reactivity between different redox half reactions and inefficient charge separation. Herein, we present the bioinspired development of amphiphilic photosensitizer and catalyst pairs that self-assemble in lipid membranes to overcome some of these limitations and enable photocatalytic CO2 reduction in liposomes using precious metal-free catalysts. Using sodium ascorbate as a sacrificial electron source, a membrane-anchored alkylated cobalt porphyrin demonstrates higher catalytic CO production (1456 vs 312 turnovers) and selectivity (77 vs 11%) compared to its water-soluble nonalkylated counterpart. Time-resolved and steady-state spectroscopy revealed that self-assembly facilitates this performance enhancement by enabling a charge-separation state lifetime increase of up to two orders of magnitude in the dye while allowing for a ninefold faster electron transfer to the catalyst. Spectroelectrochemistry and density functional theory calculations of the alkylated Co porphyrin catalyst support a four-electron-charging mechanism that activates the catalyst prior to catalysis, together with key catalytic intermediates. Our molecular liposome system therefore benefits from membrane immobilization and provides a versatile and efficient platform for photocatalysis.


Subject(s)
Liposomes , Porphyrins , Carbon Dioxide/chemistry , Catalysis , Electrons
10.
J Am Chem Soc ; 143(42): 17557-17565, 2021 10 27.
Article in English | MEDLINE | ID: mdl-34647724

ABSTRACT

Potassium acyltrifluoroborates (KATs) undergo chemoselective amide-forming ligations with hydroxylamines. Under aqueous, acidic conditions these ligations can proceed rapidly, with rate constants of ∼20 M-1 s-1. The requirement for lower pH to obtain the fastest rates, however, limits their use with certain biomolecules and precludes in vivo applications. By mechanistic investigations into the KAT ligation, including kinetic studies, X-ray crystallography, and DFT calculations, we have identified a key role for a proton in accelerating the ligation. We applied this knowledge to the design and synthesis of 8-quinolyl acyltrifluoroborates, a new class of KATs that ligates with hydroxylamines at pH 7.4 with rate constants >4 M-1 s-1. We trace the enhanced rate at physiological pH to unexpectedly high basicity of the 8-quinoline-KATs, which leads to their protonation even under neutral conditions. This proton assists the formation of the key tetrahedral intermediate and activates the leaving groups on the hydroxylamine toward a concerted 1,2-BF3 shift that leads to the amide product. We demonstrate that the fast ligations at pH 7.4 can be carried out with a protein substrate at micromolar concentrations.


Subject(s)
Amides/chemical synthesis , Borates/chemistry , Quinolines/chemistry , Borates/chemical synthesis , Green Fluorescent Proteins/chemistry , Green Fluorescent Proteins/genetics , Hydroxylamines/chemistry , Kinetics , Models, Chemical , Mutation , Quinolines/chemical synthesis
11.
JACS Au ; 1(4): 450-458, 2021 Apr 26.
Article in English | MEDLINE | ID: mdl-34467307

ABSTRACT

The direct conversion of CO2 to CH3OH represents an appealing strategy for the mitigation of anthropogenic CO2 emissions. Here, we report that small, narrowly distributed alloyed PdGa nanoparticles, prepared via surface organometallic chemistry from silica-supported GaIII isolated sites, selectively catalyze the hydrogenation of CO2 to CH3OH. At 230 °C and 25 bar, high activity (22.3 molMeOH molPd -1 h-1) and selectivity for CH3OH/DME (81%) are observed, while the corresponding silica-supported Pd nanoparticles show low activity and selectivity. X-ray absorption spectroscopy (XAS), IR, NMR, and scanning transmission electron microscopy-energy-dispersive X-ray provide evidence for alloying in the as-synthesized material. In situ XAS reveals that there is a dynamic dealloying/realloying process, through Ga redox, while operando diffuse reflectance infrared Fourier transform spectroscopy demonstrates that, while both methoxy and formate species are observed in reaction conditions, the relative concentrations are inversely proportional, as the chemical potential of the gas phase is modulated. High CH3OH selectivities, across a broad range of conversions, are observed, showing that CO formation is suppressed for this catalyst, in contrast to reported Pd catalysts.

12.
Angew Chem Int Ed Engl ; 60(43): 23306-23312, 2021 10 18.
Article in English | MEDLINE | ID: mdl-34464003

ABSTRACT

Immobilization of a phosphonated cobalt bis(terpyridine) catalyst on TiO2 nanoparticles generates a photocatalyst that allows coupling aqueous CO2 -to-syngas (CO and H2 ) reduction to selective oxidation of biomass-derived oxygenates or cellulose to formate. An enzymatic saccharification pre-treatment process is employed that enables the use of insoluble cellulose as an electron-donating substrate under benign aqueous conditions suitable for photocatalytic CO2 conversion. The hybrid photocatalyst consists of solely earth-abundant components, and its heterogeneous nature allows for reuse and operation in aqueous solution for several days at 25 °C, reaching a cellulose-to-formate conversion yield of 17 %. Thus, the proof-of-concept for valorizing two waste streams (CO2 and biomass) simultaneously into value-added chemicals through solar-driven catalysis is demonstrated.

13.
Angew Chem Int Ed Engl ; 60(17): 9650-9659, 2021 Apr 19.
Article in English | MEDLINE | ID: mdl-33559910

ABSTRACT

CH3 OH formation rates in CO2 hydrogenation on Cu-based catalysts sensitively depend on the nature of the support and the presence of promoters. In this context, Cu nanoparticles supported on tailored supports (highly dispersed M on SiO2 ; M=Ti, Zr, Hf, Nb, Ta) were prepared via surface organometallic chemistry, and their catalytic performance was systematically investigated for CO2 hydrogenation to CH3 OH. The presence of Lewis acid sites enhances CH3 OH formation rate, likely originating from stabilization of formate and methoxy surface intermediates at the periphery of Cu nanoparticles, as evidenced by metrics of Lewis acid strength and detection of surface intermediates. The stabilization of surface intermediates depends on the strength of Lewis acid M sites, described by pyridine adsorption enthalpies and 13 C chemical shifts of -OCH3 coordinated to M; these chemical shifts are demonstrated here to be a molecular descriptor for Lewis acid strength and reactivity in CO2 hydrogenation.

14.
Chem Sci ; 11(26): 6724-6735, 2020 Jul 14.
Article in English | MEDLINE | ID: mdl-33033594

ABSTRACT

Yttrium is present in various forms in molecular compounds and solid-state structures; it typically provides specific mechanical and optical properties. Hence, yttrium containing compounds are used in a broad range of applications such as catalysis, lasers and optical devices. Obtaining descriptors that can provide access to a detailed structure-property relationship would therefore be a strong base for the rational design of such applications. Towards this goal, 89Y (100% abundant spin ½ nucleus), is associated with a broad range of NMR chemical shifts that greatly depend on the coordination environment of Y, rendering 89Y NMR an attractive method for the characterization of yttrium containing compounds. However, to date, it has been difficult to obtain a direct relationship between 89Y chemical shifts and its coordination environment. Here, we use computational chemistry to model the chemical shift of a broad range of Y(iii) molecular compounds with the goal to reveal the underlying factors that determine the 89Y chemical shift. We show through natural chemical shift (NCS)-analysis that isotropic chemical shifts can easily help to distinguish between different types of ligands solely based on the electronegativity of the central atom of the anionic ligands directly bound to Y(iii). NCS-analysis further demonstrates that the second most important parameter is the degree of pyramidalization of the three anionic ligands imposed by additional neutral ligands. While isotropic chemical shifts can be similar due to compensating effects, investigation of the chemical shift anisotropy (CSA) enables discriminating between the coordination environment of Y.

15.
Chem Sci ; 11(29): 7593-7598, 2020 Feb 26.
Article in English | MEDLINE | ID: mdl-34094136

ABSTRACT

Small and narrowly distributed nanoparticles of copper alloyed with gallium supported on silica containing residual GaIII sites can be obtained via surface organometallic chemistry in a two-step process: (i) formation of isolated GaIII surface sites on SiO2 and (ii) subsequent grafting of a CuI precursor, [Cu(O t Bu)]4, followed by a treatment under H2 to generate CuGa x alloys. This material is highly active and selective for CO2 hydrogenation to CH3OH. In situ X-ray absorption spectroscopy shows that gallium is oxidized under reaction conditions while copper remains as Cu0. This CuGa material only stabilizes methoxy surface species while no formate is detected according to ex situ infrared and solid-state nuclear magnetic resonance spectroscopy.

16.
Angew Chem Int Ed Engl ; 58(39): 13989-13996, 2019 Sep 23.
Article in English | MEDLINE | ID: mdl-31328855

ABSTRACT

Selective hydrogenation of CO2 into methanol is a key sustainable technology, where Cu/Al2 O3 prepared by surface organometallic chemistry displays high activity towards CO2 hydrogenation compared to Cu/SiO2 , yielding CH3 OH, dimethyl ether (DME), and CO. CH3 OH formation rate increases due to the metal-oxide interface and involves formate intermediates according to advanced spectroscopy and DFT calculations. Al2 O3 promotes the subsequent conversion of CH3 OH to DME, showing bifunctional catalysis, but also increases the rate of CO formation. The latter takes place 1) directly by activation of CO2 at the metal-oxide interface, and 2) indirectly by the conversion of formate surface species and CH3 OH to methyl formate, which is further decomposed into CH3 OH and CO. This study shows how Al2 O3 , a Lewis acidic and non-reducible support, can promote CO2 hydrogenation by enabling multiple competitive reaction pathways on the oxide and metal-oxide interface.

17.
ChemSusChem ; 12(5): 968-972, 2019 Mar 07.
Article in English | MEDLINE | ID: mdl-30644172

ABSTRACT

Small and narrowly distributed Cu nanoparticles, supported on SiO2 decorated with isolated TiIV sites, prepared through surface organometallic chemistry, showed significantly improved CO2 hydrogenation activity and CH3 OH selectivity compared to the corresponding Cu nanoparticles supported on SiO2 . These isolated Lewis acid TiIV sites, evidenced by UV/Vis spectroscopy, are proposed to stabilize surface intermediates at the interface between Cu nanoparticles and the support.

18.
J Am Chem Soc ; 140(36): 11395-11401, 2018 09 12.
Article in English | MEDLINE | ID: mdl-30110534

ABSTRACT

In alkene metathesis, while group 6 (Mo or W) high-oxidation state alkylidenes are accepted to be key reaction intermediates for both homogeneous and heterogeneous catalysts, it has been proposed that low valent species in their +4 oxidation state can serve as precatalysts. However, the activation mechanism for these latter species-generating alkylidenes-is still an open question. Here, we report the syntheses of tungsten(IV)-oxo bisalkoxide molecular complexes stabilized by pyridine ligands, WO(OR)2py3 (R = CMe(CF3)2 (2a), R = Si(O tBu)3 (2b), and R = C(CF3)3 (2c); py = pyridine), and show that upon activation with B(C6F5)3 they display alkene metathesis activities comparable to W(VI)-oxo alkylidenes. The initiation mechanism is examined by kinetic, isotope labeling and computational studies. Experimental evidence reveals that the presence of an allylic CH group in the alkene reactant is crucial for initiating alkene metathesis. Deuterium labeling of the allylic C-H group shows a primary kinetic isotope effect on the rate of initiation. DFT calculations support the formation of an allyl hydride intermediate via activation of the allylic C-H bond and show that formation of the metallacyclobutane from the allyl "hydride" involves a proton transfer facilitated by the coordination of a Lewis acid (B(C6F5)3) and assisted by a Lewis base (pyridine). This proton transfer step is rate determining and yields the metathesis active species.

19.
J Am Chem Soc ; 140(33): 10530-10535, 2018 08 22.
Article in English | MEDLINE | ID: mdl-30028948

ABSTRACT

Copper nanoparticles supported on zirconia (Cu/ZrO2) or related supported oxides (Cu/ZrO2/SiO2) show promising activity and selectivity for the hydrogenation of CO2 to CH3OH. However, the role of the support remains controversial because most spectroscopic techniques provide information dominated by the bulk, making interpretation and formulation of structure-activity relationships challenging. In order to understand the role of the support and in particular of the Zr surface species at a molecular level, a surface organometallic chemistry approach has been used to tailor a silica support containing isolated Zr(IV) surface sites, on which copper nanoparticles (∼3 nm) are generated. These supported Cu nanoparticles exhibit increased CH3OH activity and selectivity compared to those supported on SiO2, reaching catalytic performances comparable to those of the corresponding Cu/ZrO2. Ex situ and in situ X-ray absorption spectroscopy reveals that the Zr sites on silica remain isolated and in their +4 oxidation state, while ex situ solid-state nuclear magnetic resonance spectroscopy and catalytic performances show that similar mechanisms are involved with the single-site support and ZrO2. These observations imply that Zr(IV) surface sites at the periphery of Cu particles are responsible for promoting CH3OH formation on Cu-Zr-based catalysts and provide a guideline to develop selective CH3OH synthesis catalysts.

20.
Inorg Chem ; 56(14): 7731-7736, 2017 Jul 17.
Article in English | MEDLINE | ID: mdl-28671845

ABSTRACT

Heterogeneous catalysts consisting of isolated transition-metal sites dispersed on the surface of metal oxide supports are commonly used in the chemical industry. Often their reactivity relies on the Lewis acidity of the active sites on the surface of the catalyst. A recent report from our group showed that silica-supported Co(II) sites, prepared via surface organometallic chemistry, are active in both alkene hydrogenation and alkane dehydrogenation, possibly linked to the Lewis acidity of the Co(II) sites. Here we use molecular probes and analogues to both qualitatively and quantitatively model the Lewis acidity of the surface sites. Some sites do not bind probe molecules like carbon monoxide, tetrahydrofuran, and olefins, while others exhibit a continuum of Lewis acidities. This is consistent with variations in the coordination environment of Co. These results suggest that only the most Lewis acidic sites are involved in dehydrogenation and hydrogenation, consistent with catalyst poisoning studies.

SELECTION OF CITATIONS
SEARCH DETAIL
...