Defining Cephalomedullary Nail Breakage Rates: A Systematic Review and Meta-Analysis.

OBJECTIVE: To establish the background rate of breakage of cephalomedullary nails. DATA SOURCES: MEDLINE, PubMed, and Web of Science were searched on April 3, 2023. STUDY SELECTION: All English-language studies that examined trochanteric with or without subtrochanteric fractures and identified cephalomedullary nail breakage as an outcome measure and a breakage rate could be derived were included. Implants captured were predominantly the TFNA, TFN, and PFN by DePuy Synthes, various versions of the Gamma nail by Stryker, the Zimmer Natural Nail by Zimmer Biomet, and the Intertan by Smith and Nephew. DATA EXTRACTION: The author, year of publication, dates of implant insertion, study design, method of detection of breakages, implant used, number of implant breakages, number of implants inserted, breakage rate, and follow-up were extracted. DATA SYNTHESIS: Meta-analysis of included studies used descriptive nonparametric statistics and a noncomparative proportion for the pooled result. Differences in results between study design types were compared using the mean breakage rate per study design. CONCLUSIONS: Cephalomedullary nail breakage is a rare complication with a median reported rate of 0.6% and a pooled result rate of 0.4%. Ninety-five percent of studies had a breakage rate of 1.3% or less, which sets a benchmark from the reported literature for future studies. There is wide variability in rates of breakage reported between different types of study designs with single-center review studies reporting breakage rates nearly 4-fold greater than large-scale administrative database reviews. The rate of implant breakage should not be used in isolation to judge an implant's performance. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Accuracy of Leg Length and Offset Measurements During Total Hip Arthroplasty Using an Imageless Navigation System.

Introduction Leg length and offset are important considerations in total hip arthroplasty (THA). Navigation systems are capable of providing intra-operative measurements of leg length and offset, and high accuracy has been shown in experimental studies. This study assesses the accuracy of an imageless navigation system with a pinless femoral array (Hip 5.1, BrainLAB, Feldkirchen, Germany) in measuring leg length and offset changes in vivo. Methods A prospective, consecutive series of 37 patients undergoing navigated THA were included in the study. Intra-operative measurements of leg length and offset were recorded using the navigation system. For each patient, pre- and post-operative digital radiographs were scaled and analyzed to provide radiographic measurements for comparison. Results Measurements of leg length change made by the navigation system showed a strong correlation with the size of change measured radiographically (R = 0.71; p<0.0001). The mean difference between the radiographic and navigational measurement was 2.6mm ± 3.0mm (0.0-16.0mm) (mean, SD, range). The navigation system was accurate to within 1mm of the radiographic measurement in 49% of cases, within 2mm in 66% of cases, and within 5mm in 89% of cases. Measurements of offset change by the navigation system also showed a correlation with radiographic measurements, albeit less pronounced (R = 0.35; p=0.035). The mean difference between navigational and radiographic measurements was 5.5mm ± 4.7mm (0.0-16.0mm) (mean, SD, range). The navigation system was accurate within 1mm of the radiographic measurement in 22% of cases, within 2mm in 35% of cases, and within 5mm in 57% of cases. Conclusions This research demonstrates in vivo that an imageless, non-invasive navigation system is a reliable tool for intra-operative leg length (accurate within 2mm) and to a lesser extent offset measurement (accurate within 5mm) when compared to standard practice of plain film radiographs.

Utility assessment of virtual reality technology in orthopaedic surgical training.

BACKGROUND: Virtual reality (VR) has proved to be a useful technology beyond the field of surgery in areas that are highly dependent on consolidating motor tasks. Despite being reliant on these skills, the uptake of VR in orthopaedics has been extremely limited. Therefore, this study's purpose was to help assess the utility of applying this technology in teaching different experience levels of orthopaedic training. Secondary objectives were to assess enjoyability and feasibility to complete modules prior to surgery. METHODS: The study explored which experience level of orthopaedic trainee benefits the most from the proposed haptic VR package. Participants completed a total hip arthroplasty module using the Fundamental Surgery package. Qualitative data was collected in the form of a post completion survey of 24 participants. Quantitative data was collected in the form of module completion time and percentage of skills completed. RESULTS: 37.5% of participants rated non-training orthopaedic registrars as the experience level that would benefit the most from using VR. 88% of participants would recommend this module to a colleague and found the module very enjoyable (4.2 out of 5). 50% of participants took between 25 and 31.5 min to finish and completed between 80% and 95% of tasks in the module. CONCLUSIONS: The study demonstrated that non-training orthopaedic registrars were most likely to benefit using this particular VR package. Most users found the experience to be enjoyable and would recommend it to a colleague. It was also deemed feasible to complete the module prior to performing an operation.

The Tyranny of Distance: How Hospital Transfer Affects Time to Surgery for Hip Fracture Patients.

Introduction In Western Australia, vast distances between hospitals can limit a patient's access to timely surgical intervention. The aim was to examine the effect of patient location on outcomes. Methods Hip fracture data from all operative cases at the major Western Australian hospitals between 2015 and 2019 was retrospectively reviewed. A total of 5691 patients were separated into three groups based on hospital of first presentation - directly to the operative hospital (metropolitan), a hospital less than 2.5 hours by road from the operative centre (outer-metropolitan), or requiring transfer by air (rural). Impact of location on time to surgery, length of stay and 30-day and 120-day mortality was analysed. Results The mean time to surgery was 26.7 hours for metropolitan patients, 37.0 hours for outer-metropolitan, and 42.6 hours for rural patients. Outer-metropolitan patients were less likely to reach surgery within 48 hours than metropolitan patients (80.2% vs 91.5%, p<0.001), with even lower rates for rural patients (66.8%, p<0.001). Acute length of stay was longer for rural patients compared to outer-metropolitan (7.2 vs 5.8 days) and metropolitan patients (5.5 days) (p<0.001). There was no significant difference in 30-day or 120-day mortality for outer-metropolitan or rural patients compared to metropolitan patients despite requiring transfer. However, when considered as a whole group there was an increased 120-day mortality with increased time to surgery. Overall mortality was 8.7% at 30 days and 17.3% at 120 days. Conclusion Patients presenting outside the metropolitan area with a hip fracture have a longer time to surgery and longer length of stay. Delay for outer-metropolitan patients is disproportionately longer than transit time alone and may provide opportunities for improvement.

The Australian ankle syndesmosis injury survey.

BACKGROUND & OBJECTIVE: The ankle syndesmosis is frequently disrupted in ankle injuries, with higher incidence in concomitant ankle fractures. There is debate regarding the most appropriate surgical management of these injuries, with the development of suture-button devices challenging the conventional approach of surgical stabilisation with syndesmotic screws. The primary aim of this study was to assess current practice variation at a national level, enabling a comparison with reported practice around the world. The secondary aims were to assess practice variation between operative indications and inconsistencies between surgeon device usage and personal preference should they be injured themselves. METHODS: A 20-item survey detailing surgical experience, diagnosis, surgical management preference and a series of case studies was conducted. The survey was endorsed and promoted by the Australian Orthopaedic Association (AOA). RESULTS: 125 responses were received during the three-month study period. The most commonly used method to stabilise a syndesmotic injury by Australian orthopaedic surgeons was two 3.5 mm screws (26.4%), closely followed by one suture-button (23.2%). Overall, 44% of surgeons employ a dynamic stabilisation method and 54.4% a static stabilisation method. Half of surgeons recommend routine removal of syndesmosis screws, and surgeons tend to use two devices for high Weber C fractures. One third of surgeons who most commonly use screws in their practice would actually prefer a suture-button for management of their own syndesmosis injury. CONCLUSION: Significant variability remains in the management of syndesmosis injuries. This survey of Australian orthopaedic surgeons reveals higher suture-button device use when compared to other countries.

Rationale and feasibility assessment of an institution-based virtual reality hub in orthopaedic surgical training: an Australian pilot study.

BACKGROUND: Virtual reality (VR) has been established as a valuable tool outside of medicine but there has been limited uptake in orthopaedics despite being a specialty heavily dependent on psychomotor skills. The purpose of this study was to assess the feasibility of setting up an on-site virtual reality surgical training hub for an orthopaedic surgery unit. A secondary objective was to document encountered hurdles to assist other institutions with a similar process. METHODS: The study explored the logistical and organizational considerations in the process of creating a virtual reality training area. This included: review of location, set up management, funding arrangements, set up time, research opportunities and training time. Set up and completion times were recorded during a separate trial of 24 participants ranging from medical students to senior consultant orthopaedic surgeons. RESULTS: A VR training area was successfully established over a period of 3 months. A dedicated area for training where the equipment remains permanently was designated to facilitate ease of use. Average set up took 7.5 min to turn the computer on and 25 min for the participants to start the module. Issues identified during set up were recorded. CONCLUSIONS: The study demonstrated that it is possible to set up a dedicated area for virtual reality surgical training within a hospital unit. A dedicated lockable area is the most feasible method of establishing such a space and reduces the requirement to recalibrate and transfer equipment around the hospital.

Spaced Repetition Learning as a Tool for Orthopedic Surgical Education: A Prospective Cohort Study on a Training Examination.

OBJECTIVE: Most surgical residents will learn written information via passive, massed exposure of material. Spaced repetition learning is an alternative, more effective, and efficient method to this more traditional method of teaching. We hypothesized that this method in the lead up to an Orthopedic basic sciences examination for postgraduate trainees would provide an effective solution for time-poor surgical trainees. DESIGN: Twelve participants were prospectively enrolled in the study and provided informed consent and then were sent a pooled set of 1400 practice questions in a flashcard format using the spaced repetition learning program Anki. Study habits were tracked via the program and recorded the evening prior to the examination taking place. The final examination scores were then recorded and tabulated. All data were anonymized. Pearson correlation coefficient and p values were calculated for time spent and number of cards reviewed using the program. SETTING: Australian Orthopedic Surgical trainees prepared for basic science examination. PARTICIPANTS: All trainees eligible to sit the examination were approached for participation. Twelve participants started and all completed the study. RESULTS: There was a strong correlation (R = 0.86, p < 0.001) between time spent and hence number of flashcards reviewed using the Anki program and final examination scores. CONCLUSIONS: Results from this study support our hypothesis that spaced repetition learning using a flashcard format is an effective study strategy for learning material for Orthopedic examinations. This method of learning can be applied to other areas of surgery such as clinical examination or procedural skills.

Closed Management of a Distal Radius Refracture Through a Bent Volar Plate: Can an Open Procedure be Avoided?: A Case Report.

CASE: A 55-year-old man sustained a distal radius fracture, which was fixed with a volar plate 20 years ago. He then fell from 2 m and sustained a refracture with a bent but intact volar plate. A manipulation under anaesthetic/anaesthesia was attempted. Satisfactory reduction was confirmed and maintained, with bony union confirmed at 6 months. Regular follow-up showed continuing functional improvement. CONCLUSION: This rare case avoided surgical intervention and its associated risks and costs. Attempted closed reduction can be considered a treatment option before open revision fixation, with demonstrated ability for fracture healing in an acceptable position.

Novel Constrained Dual Mobility Hip Prosthesis to Combat Instability in Revision Total Hip Arthroplasty whilst Preserving Normal Function.

We present the case of a male patient with sepsis and a chronic discharging sinus in a multirevised total hip replacement. Following extensive debridement, the reimplanted hip became unstable. With the patient's long-term desire to return to work and ride a bicycle with his children, the patient agreed to proceed with a novel, custom-designed, constrained dual mobility liner which allowed unrestricted movement. In 2017, the patient underwent revision surgery with this novel dual mobility constrained prosthesis. The patient was very quickly able to regain independence. After 16 years of unemployment, he managed to return to gainful employment as a cleaner rapidly regaining function as well as finally being able to ride a bike with his children for the first time.

Implant Fracture Analysis of the TFNA Proximal Femoral Nail.

BACKGROUND: Mechanical failure of intramedullary nails is rare. This investigation was prompted by a series of cases of observed breakage of the recently introduced TFNA Proximal Femoral Nailing System (TFN [Trochanteric Fixation Nail]-Advanced; DePuy Synthes) in our region. Laboratory analysis and case data are presented, in contribution to post-market surveillance. METHODS: Medical and imaging records from the 3 public tertiary orthopaedic trauma hospitals in Western Australia were reviewed. Relevant data of patients in whom breakage of the TFNA implant occurred between 2016 and 2018 were collected and analyzed. Laboratory review of retrieved implants was conducted at the Centre for Implant Technology and Retrieval Analysis (CITRA) in Western Australia. RESULTS: A total of 16 cases of TFNA implant breakage were recorded and analyzed. The predominant OTA/AO fracture classification was 31A3 (12 cases, 75%). The reduction quality was good in 10 cases, acceptable in 4 cases, and poor in 2 cases. The mean time to failure (and standard deviation) was 5.0 ± 2.2 months (range, 2.2 to 9.8 months). The treatment modality for the breakage was revision nailing in 11 cases, arthroplasty in 3, and nonoperative management in 2. All nails broke at the proximal screw aperture, with 1 nail additionally breaking at the distal aperture. Of 8 patients treated with a second TFNA implant for nail breakage, 3 (38%) returned with breakage of the revision implant. Laboratory analysis of the broken nails demonstrated a unique fracture pattern, with a stepped propagation pathway. CONCLUSIONS: This study represents the largest series, to our knowledge, of proximal femoral nail breakages in the published English literature and is the first that we are aware of to involve laboratory analysis of the TFNA implant. Changes to the nail design and/or alloy may have contributed to the observed cases of breakage, and this study will be followed by an evaluation of breakage rates in comparison with those of previous generations of nailing systems. We advise close clinical and radiographic surveillance of patients with unstable hip fracture patterns who undergo osteosynthesis with use of a TFNA implant. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Morbidity and Safety of Iliac Crest Reference Array Pins in Navigated Total Hip Arthroplasty: A Prospective Cohort Study.

BACKGROUND: Navigated total hip arthroplasty (THA) can employ intra-osseous pins through a separate incision to secure reference arrays to the iliac crest. This study is the first to investigate the consequences of pin use in THA in vivo. METHODS: A prospective, consecutive series of 43 patients presenting for navigated THA were included. Two temporary 125 × 4 mm Schanz screws were inserted into the iliac crest for the attachment of a reference array. Telephone follow-up occurred at 6 and 12 weeks post-operatively. Patients were asked about pain, interference with daily activities, how often the wound was noticed, and duration of discomfort. Patient body mass index was recorded. RESULTS: The follow-up rate was 100%. Pin site pain at any time post-operatively was reported by 24 patients (56%). This improved to 30%, 9%, and 2% at 3, 6, and 12 weeks, respectively. On average, pain lasted for 16 days total. The most common complaints after pain were clothing discomfort (23%), pain when wearing a belt (12%), or pain when mobilizing (9%). For the majority (98%) of patients, all symptoms had resolved by 12 weeks. There was no nerve injury, pin site fracture, infection, or screw breakage. Patients with body mass index greater than 30 kg/m2 were up to 3 times more likely to experience pin site pain (P = .05), and had a longer duration of pain (P = .04). CONCLUSION: Surgeons and patients should be aware that using navigational pins for array fixation carries low complication rates but often will cause pain and irritation that resolves in the short term.

A novel fluoroscopic approach to assessing patient positioning in total hip arthroplasty: accuracy and the influence of body mass index.

INTRODUCTION: Accurate prosthetic cup placement is important in total hip arthroplasty (THA) and can be influenced by patient positioning. This study aims to assess the accuracy of patient positioning prior to THA, describe a new technique of assessment, and evaluate the influence of body mass index (BMI) on positioning error. METHODS: A consecutive series of 37 patients undergoing unilateral THA were investigated. After patient positioning in lateral decubitus, a lateral fluoroscopic image through the table was taken. The C-arm of the image intensifier was manipulated in 2 planes (coronal, transverse) until a perfect lateral view of the pelvis was obtained, defined as when the native acetabulae were superimposed. Degrees of positioning error in the 2 planes were recorded, along with patient BMI. RESULTS: There were 6 patients (16%) positioned within 2° of true lateral in both planes. A further 21 patients (57%) had an error of 5° or more in at least 1 plane. Mean absolute positioning error was 3.0° (SD 2.2°; range 0°-9°) and 3.0° (SD 3.2°; range 0°-13°) in the transverse and coronal planes respectively. Pelvic adduction in the coronal plane was 4.5 fold more likely than abduction (49% vs. 11%). Correlation was shown between patient BMI and the combined error in the 2 planes (R = 0.48, p = 0.001). DISCUSSION: Fluoroscopic positioning assessment prior to THA demonstrates that significant malpositioning is common and more likely with increasing BMI. This technique may be particularly useful for patients with a BMI of >30 kg m-2.