Rational design of solid-acid catalysts for cellulose hydrolysis using colloidal theory.

Solid-acid catalysts functionalized with catalytic groups have attracted intense interest for converting cellulose into soluble products. However, design of solid-7 acid catalysts has been guided by molecular level interactions and the actual mechanism of cellulose-solid-acid catalyst particles adsorption remains unknown. Here, colloidal stability theory, DLVO, is used to rationalize the design of solid acids for targeted cellulose adsorption. In nearly all cases, an energy barrier, arising from electrostatic repulsion and much larger than the energy associated with thermal fluctuations, prevents close contact between the solid acid and cellulose. Polymer-based solid-acid substrates such as polystyrene and Nafion are especially ineffective as their interaction with cellulose is dominated by the repulsive electrostatic force. Carbon and metal oxides have potential to be effective for cellulose-solid-acid interaction as their attractive van der Waals interaction can offset the repulsive electrostatic interaction. The effects of reactor temperature and shear force were evaluated, with the finding that reactor temperature can minimize the catalyst-cellulose interaction barrier, promoting coagulation, but that the shear force in a typical laboratory reactor cannot. We have evaluated strategies for enhancing cellulose-catalyst interaction and conclude that raising reaction temperature or synthesizing acid/base bifunctional catalysts can effectively diminish electrostatic repulsion and promote cellulose-catalyst coagulation. The analysis presented here establishes a rational method for designing solid acid catalysts for cellulose hydrolysis.

Binary Liquid Mixture Contact-Angle Measurements for Precise Estimation of Surface Free Energy.

Surface free energy remains a fundamental material property to characterize the interfacial interactions between liquid and solid. Here, we developed a precise approach to determine surface energy by using contact angles of binary mixtures of water-dimethyl sulfoxide (DMSO), water-formamide, water-ethylene glycol, and water-glycerol and analyzed using the Owens-Wendt method. A mixing equation was developed to estimate liquid-dispersive surface tension (γL,mixd) and polar surface tension (γL,mixp) parameters for binary mixtures. To test the approach, two hydrophobic surfaces, flat polydimethylsiloxane (PDMS), and silane-derivatized glass were prepared and the contact angle of mixtures on the surfaces were obtained. Surface energy of PDMS determined by three binary mixtures agrees with that from pure solvents, but the uncertainty decreases to less than 13%; remarkably, the uncertainty drops to around 5% once we combined measured contact angles from all the mixtures, namely, water-DMSO, water-formamide, and water-ethylene glycol. Surface energies of silane-derivatized glass bearing ethyl (C2), hexyl (C6), and octadecyl (C18) alkyl chains were determined with water-formamide and water-glycerol mixtures. Measured contact angles fit the Owens-Wendt model, and surface energy value determined from different binary mixtures agree with each other within error. Contact angle measurement of liquid mixtures is a simple method for determination of surface energy that improves the precision of surface energy determined by measurements of multiple pure solvents.

3D skeletal muscle fascicle engineering is improved with TGF-ß1 treatment of myogenic cells and their co-culture with myofibroblasts.

BACKGROUND: Skeletal muscle wound healing is dependent on complex interactions between fibroblasts, myofibroblasts, myogenic cells, and cytokines, such as TGF-ß1. This study sought to clarify the impact of TGF-ß1 signaling on skeletal muscle cells and discern between the individual contributions of fibroblasts and myofibroblasts to myogenesis when in co-culture with myogenic cells. 3D tissue-engineered models were compared to equivalent 2D culture conditions to assess the efficacy of each culture model to predictively recapitulate the in vivo muscle environment. METHODS: TGF-ß1 treatment and mono-/co-cultures containing human dermal fibroblasts or myofibroblasts and C2C12 mouse myoblasts were assessed in 2D and 3D environments. Three culture systems were compared: cell monolayers grown on 2D dishes and 3D tissues prepared via a self-assembly method or collagen 1-based hydrogel biofabrication. qPCR identified gene expression changes during fibroblast to myofibroblast and myoblast differentiation between culture conditions. Changes to cell phenotype and tissue morphology were characterized via immunostaining for myosin heavy chain, procollagen, and α-smooth muscle actin. Tissue elastic moduli were measured with parallel plate compression and atomic force microscopy systems, and a slack test was employed to quantify differences in tissue architecture and integrity. RESULTS: TGF-ß1 treatment improved myogenesis in 3D mono- and co-cultures containing muscle cells, but not in 2D. The 3D TGF-ß1-treated co-culture containing myoblasts and myofibroblasts expressed the highest levels of myogenin and collagen 1, demonstrating a greater capacity to drive myogenesis than fibroblasts or TGF-ß1-treatment in monocultures containing only myoblasts. These constructs possessed the greatest tissue stability, integrity, and muscle fiber organization, as demonstrated by their rapid and sustained shortening velocity during slack tests, and the highest Young's modulus of 6.55 kPA, approximate half the stiffness of in situ muscle. Both self-assembled and hydrogel-based tissues yielded the most multinucleated, elongated, and aligned muscle fiber histology. In contrast, the equivalent 2D co-culture model treated with TGF-ß1 completely lacked myotube formation through suppression of myogenin gene expression. DISCUSSION: These results show skeletal muscle regeneration can be promoted by treating myogenic cells with TGF-ß1, and myofibroblasts are superior enhancers of myogenesis than fibroblasts. Critically, both TGF-ß1 treatment and co-culturing skeletal muscle cells with myofibroblasts can serve as myogenesis accelerators across multiple tissue engineering platforms. Equivalent 2D culture systems cannot replicate these affects, however, highlighting a need to continually improve in vitro models for skeletal muscle development, discovery of therapeutics for muscle regeneration, and research and development of in vitro meat products.

Variation of thermal conductivity of DPPC lipid bilayer membranes around the phase transition temperature.

Given their amphiphilic nature and chemical structure, phospholipids exhibit a strong thermotropic and lyotropic phase behaviour in an aqueous environment. Around the phase transition temperature, phospholipids transform from a gel-like state to a fluid crystalline structure. In this transition, many key characteristics of the lipid bilayers such as structure and thermal properties alter. In this study, we employed atomistic simulation techniques to study the structure and underlying mechanisms of heat transfer in dipalmitoylphosphatidylcholine (DPPC) lipid bilayers around the fluid-gel phase transformation. To investigate this phenomenon, we performed non-equilibrium molecular dynamics simulations for a range of different temperature gradients. The results show that the thermal properties of the DPPC bilayer are highly dependent on the temperature gradient. Higher temperature gradients cause an increase in the thermal conductivity of the DPPC lipid bilayer. We also found that the thermal conductivity of DPPC is lowest at the transition temperature whereby one lipid leaflet is in the gel phase and the other is in the liquid crystalline phase. This is essentially related to a growth in thermal resistance between the two leaflets of lipid at the transition temperature. These results provide significant new insights into developing new thermal insulation for engineering applications.

Fibroblast extracellular matrix and adhesion on microtextured polydimethylsiloxane scaffolds.

The immediate physical and chemical surroundings of cells provide important biochemical cues for their behavior. Designing and tailoring biomaterials for controlled cell signaling and extracellular matrix (ECM) can be difficult due to the complexity of the cell-surface relationship. To address this issue, our research has led to the development of a polydimethylsiloxane (PDMS) scaffold with defined microtopography and chemistry for surface driven ECM assembly. When human fibroblasts were cultured on this microtextured PDMS with 2-6 µm wide vertical features, significant changes in morphology, adhesion, actin cytoskeleton, and fibronectin generation were noted when compared with cells cultured on unmodified PDMS. Investigation of cellular response and behavior was performed with atomic force microscopy in conjunction with fluorescent labeling of focal adhesion cites and fibronectin in the ECM. Changes in the surface topography induced lower adhesion, an altered actin cytoskeleton, and compacted units of fibronectin similar to that observed in vivo. Overall, these findings provide critical information of cell-surface interactions with a microtextured, polymer substrate that can be used in the field of tissue engineering for controlling cellular ECM interactions.

A photosensitive surface capable of inducing electrophysiological changes in NG108-15 neurons.

Retinal prostheses promise to be a viable therapy for many forms of blindness. Direct stimulation of neurons using an organic light-sensitive, self-assembled monolayer surface offers a simple alternative to conventional semiconductor technology. For this purpose we have derivatized an indium tin oxide (ITO) substrate with the photosensitive dye, NK5962, using 3-(aminopropyl)trimethoxysilane (APTMS) as cross-linker. The surface was characterized through contact angle goniometry, electrochemical impedance spectroscopy, grazing angle infrared and ultraviolet-visible spectrophotometry. NG108-15 neurons were grown on the ITO-APTMS-NK5962 surface and neural responses from electrical stimulation vs. photostimulation through the ITO-APTMS-NK5962 surface were measured using patch clamp electrophysiology. Under these conditions, photostimulation of depolarized cells caused an approximate 2-fold increase in voltage-gated sodium (Na(+)) current amplitude at a membrane potential of -30mV. Our results demonstrate the feasibility of stimulating neurons, grown on light-sensitive surfaces, with light impulses, which ultimately may facilitate the fabrication of a simple, passive retinal prosthetic.

A thermoresponsive, micro-roughened cell culture surface.

Surface topography has been shown to play a major role in cell behavior, but has yet to be seriously exploited in the field of cell surface engineering. In the present work, surface roughness has been used in combination with the thermoresponsive polymer polyisopropylacrylamide (PIPAAm) to generate cell sheets with tailored biochemical properties. Micro-roughened polystyrene (PS) with 1.5-5.5 µm features was derivatized with PIPAAm to form a cell culture surface for the growth of human fibroblast cell sheets that exhibit a modified cytoskeleton and extracellular matrix. Fibroblasts cell sheets cultured on the rough surfaces had fewer actin stress fibers and twice the average fibronectin (FN) fibril formation when compared to cell sheets on flat substrates. The cell sheets harvested from the roughened PS were collected after only 2 days of culture and detached from the PIPAAm grafted surface in <1h after cooling the culture system. The simple and rapid method for generating cell sheets with increased FN fibril formation has applications in tissue grafts or wound repair and has demonstrated that the thermoresponsive surface can be used for reliable cell sheet formation.

Cell behavior on surface modified polydimethylsiloxane (PDMS).

Designing complex tissue culture systems requires cell alignment and directed extracellular matrix (ECM) and gene expression. Here, a micro-rough, polydimethylsiloxane (PDMS) surface, that also integrates a micro-pattern of 50 µm wide lines of fibronectin (FN) separated by 60 µm wide lines of bovine serum albumin (BSA), is developed. Human fibroblasts cultured on the rough, patterned substrate have aligned growth and a significant change in morphology when compared to cells on a flat, patterned surface. The rough PDMS topography significantly decreases cell area and induces the upregulation of several ECM related genes by two-fold when compared to cells cultured on flat PDMS. This study describes a simple surface engineering procedure for creating surface architecture for scaffolds to design and control the cell-surface interface.

Super-hydrophobic, highly adhesive, polydimethylsiloxane (PDMS) surfaces.

Super-hydrophobic surfaces have been fabricated by casting polydimethylsiloxane (PDMS) on a textured substrate of known surface topography, and were characterized using contact angle, atomic force microscopy, surface free energy calculations, and adhesion measurements. The resulting PDMS has a micro-textured surface with a static contact angle of 153.5° and a hysteresis of 27° when using de-ionized water. Unlike many super-hydrophobic materials, the textured PDMS is highly adhesive, allowing water drops as large as 25.0 µL to be inverted. This high adhesion, super-hydrophobic behavior is an illustration of the "petal effect". This rapid, reproducible technique has promising applications in transport and analysis of microvolume samples.

Direct detection of acetylcholinesterase inhibitor binding with an enzyme-based surface plasmon resonance sensor.

Acetylcholinesterase (AChE) inhibitors are potentially lethal but also have applications as therapeutic drugs for neurodegenerative diseases such as Alzheimer's. Enzyme inhibitor binding are difficult to be detected directly by surface plasmon resonance (SPR) due to their small molecular weight. In this article, we describe the detection of AChE inhibitor binding by SPR without the use of competitive binding or antibodies. AChE was immobilized on the gold surface of an SPR sensor through covalent attachment to a self-assembled monolayer (SAM) of a COOH-terminated alkanethiol. The activity of the immobilized protein and the surface density were determined by using a standard photometric assay. Binding of two reversible inhibitors, which are used as therapeutic drugs, was detectable by SPR without the need to further modify the surface or the use of other reagents. The binding affinities (K(A)) obtained from the fits were 3.8 × 10(3)M(-1) for neostigmine and 1.7 × 10(3)M(-1) for eserine, showing a higher affinity of the sensor for neostigmine. We believe that the SPR sensor's ability to detect these inhibitors is due to conformational changes of the enzyme structure on inhibitor binding.

SPR-based single nucleotide mismatch biosensor.

The detection and characterization of the hybridization event of 21-base, unlabeled DNA oligonucleotides with a monolayer of complementary DNA immobilized on a gold surface, by electrochemical impedance spectroscopy and surface plasmon resonance (SPR) is presented. A thiol modification on the probe DNA strand allowed for its attachment to the surface via self-assembly. For the hybridization of full match target DNA a detection limit of 20 pM was determined. RNA hybridization was also detectable with the same sensor, with a similar detection limit. The SPR signal generated upon hybridization of the full match was always distinguishable from the single mismatch target DNA oligonucleotides when the mismatch was in the middle or at the proximal end of the target DNA sequence. However, the response of the sensor was identical for the hybridization of the full match and the distal end mismatch. The SPR sensor described is reusable over at least 20 hybridization/regeneration cycles and is insensitive to flow rate (20-800 µL min-1) or temperature (20-60 °C). Based on the SPR response, the surface density of the probe was estimated to be at least 4.3 × 1012 molecules per cm2.

Immobilization of acetylcholinesterase in lipid membranes deposited on self-assembled monolayers.

Human red blood cell acetylcholinesterase was incorporated into planar lipid membranes deposited on alkanethiol self-assembled monolayers (SAMs) on gold substrates. Activity of the protein in the membrane was detected with a standard photometric assay and was determined to be similar to the protein in detergent solution or incorporated in lipid vesicles. Monolayer and bilayer lipid membranes were generated by fusing liposomes to hydrophobic and hydrophilic SAMs, respectively. Liposomes were formed by the injection method using the lipid dimyristoylphosphatidylcholine (DMPC). The formation of alkanethiol SAMs and lipid monolayers on SAMs was confirmed by sessile drop goniometry, ellipsometry, and electrochemical impedance spectroscopy. In this work, we report acetylcholinesterase immobilization in lipid membranes deposited on SAMs formed on the gold surface and compare its activity to enzyme in solution.

A multilayered approach to complex surface patterning.

A method for developing complex nanopatterns on surfaces has been developed by combining self-assembly, photolabile protecting groups, and multilayered films. An o-nitrobenzyl protecting group has been incorporated into molecular level films utilizing thiol-gold interactions. When the o-nitrobenzyl group is cleaved by ultraviolet light, a carboxylic acid terminated layer remains on the surface and is available for activation and further functionalization through amide bond formation. Using this method, multilayered films have been constructed and characterized by contact angle goniometry, cyclic voltammetry, grazing incidence infrared spectroscopy, and X-ray photoelectron spectroscopy measurements. Complex surface patterns can be achieved by creating a surface array using a photomask and then further functionalizing the irradiated area through covalent coupling. Fluorophores were attached to the deprotected regions, providing visual evidence of surface patterning using fluorescence microscopy. This approach is universal to bind moieties containing free amine groups at defined regions across a surface, allowing for the development of films with complex chemical and physicochemical properties.

Detection of oligonucleotide systematic mismatches with a surface plasmon resonance sensor.

The detection and parallel characterization of the hybridization event of 21-base, unlabeled DNA oligonucleotides with a monolayer of complementary DNA immobilized on a gold surface by surface plasmon resonance (SPR) is presented. A thiol modification on the probe DNA strand allowed for its attachment to the surface via self-assembly. For the hybridization of full match DNA a detection limit of 20 pM was determined. The change in SPR signal was always larger for the full match compared to the one-mismatch target DNA oligonucleotides when the mismatch was in the middle or at the proximal end of the target DNA. Hybridization conditions (buffer concentration, flow rate, and temperature) did not affect the ability of the sensor to discriminate for single nucleotide mismatches. To our knowledge this is the only work where a comparison on the surface hybridization efficiency is performed between proximal, distal, and middle mismatches and the effect of three hybridization parameters is studied with regard to the detection of single nucleotide mismatches using SPR.

Effect of electrode roughness on the capacitive behavior of self-assembled monolayers.

Analytical gold electrodes were polished mechanically and electrochemically and the true area of the electrode surface was measured by quantitative oxidative/reductive cycling of the electrode. A roughness factor for each electrode was determined from the ratio of the true area to the geometric area. The roughness is fully described by a combination of microscopic roughness (up to tens of nanometers) and macroscopic roughness (on the order of hundreds of nanometers) terms. The electrodes were then derivatized with a self-assembled monolayer (SAM) of dodecanethiol or a thioalkane azacrown and characterized by impedance spectroscopy. The behavior of the electrodes was modeled with either a Helmholtz or Randles equivalent circuit (depending on the SAM used) in which the capacitance was replaced with a constant phase element. From the model, an effective capacitance and an alpha factor that quantifies the nonideality of the SAM capacitance was obtained. The effective capacitance divided by the roughness factor yields the capacitance per unit true area, which is only a function of microscopic roughness. The relationship between this capacitance and the alpha factor indicates that microscopic roughness predominantly affects the nonideality of the film while macroscopic roughness predominantly affects the magnitude of the film's capacitance. Understanding the contribution of the electrode topography to the magnitude and ideality of the SAM capacitance is important in the construction of SAM-based capacitive sensors because it predicts the importance of electrode-electrode variations.

13C NMR study of the ion-binding selectivity of a new ammonium ionophore.

A bicyclic peptide, cyclo (L-Glu(1)-D-Leu(2)-Aib(3)-L-Lys(4)-D-Leu(5)-D-Ala(6))-cyclo-(1gamma-4epsilon) (I), was designed and synthesized to provide an ammonium ion complexation site in a tetrahedral geometry. Molecular modeling, dynamics and electrostatic studies for I indicated that it exhibits some selectivity for ammonium ions over potassium and sodium ions. NMR measurements in CDCl(3)/CD(3)OD (1:1) show that for those carbonyl groups involved in cation binding, (13)C resonances shifted downfield with increasing cation concentration. The resonance that exhibited the largest change in chemical shift between uncomplexed and complexed forms was used to determine the selectivity. Selectivity values obtained were logK(NH(4) (+), Na(+) ) = - 2.4 and logK(NH(4) (+), K(+) ) = - 0.6.

Photocurrent generation in noncovalently assembled multilayered thin films.

Multilayered photocurrent generating thin films were fabricated by templated noncovalent assembly via stepwise assembly of molecular components. Each of films I-IV contained an underlying self-assembled monolayer (SAM) consisting of an alkanethiol linked covalently to a 2,6-dicarboxypyridine ligand that served as a binding site for attaching additional molecular components. The SAM subsequently was functionalized by sequential deposition of Cu(II), Co(II), or Fe(III) ions followed by a variety of substituted 2,6-dicarboxypyridine ligands as a means to incorporate one or more layers of pyrene chromophores into the film. The films were characterized by contact angle measurements, ellipsometry, grazing incidence IR, cyclic voltammetry, and impedance spectroscopy after deposition of each layer, confirming the formation of ordered, stable layers. Following incorporation into a three-electrode system, photoexcitation resulted in the generation of a cathodic photocurrent in the presence of methyl viologen and an anodic photocurrent in the presence of triethanolamine. Using this strategy, systems were fabricated that produced up to 89 nA/cm(2) of reproducible photocurrent.

Reversible photoswitchable wettability in noncovalently assembled multilayered films.

Reversible and irreversible photoinduced changes in surface wettability were observed in noncovalently assembled multilayered films. The multilayered films studied were fabricated from a self-assembled monolayer (SAM) consisting of 4-(10-mercaptodecyloxy)pyridine-2,6-dicarboxylic acid on gold, Cu(II) ions complexed to the pyridine head group of the SAM, and either cis- (film 1) or trans- (film 2) stilbene-4,4'-dicarboxylic acid complexed to the Cu(II) ions. Irradiation of film 1 at wavelengths corresponding to the absorption band of the cis-stilbene isomer resulted in an irreversible chemical change and an irreversible increase in wettability, as indicated by surface contact angle and grazing incidence IR measurements. However, no evidence for cis-/trans-photoisomerization was observed. Films 3 and 4, similar to films 1 and 2 in that they consist of an underlying SAM, an intermediate layer consisting of Cu(II) ions, and either cis- or trans-stilbene-4,4'-dicarboxylic acid as the capping ligand, were fabricated with a mixed SAM that contained both 4-(10-mercaptodecyloxy)pyridine-2,6-dicarboxylic acid and 4-tert-butylbenzenethiol. Irradiation of these films at wavelengths corresponding to stilbene isomer absorption bands resulted in reversible cis- to trans- (film 3) and trans- to cis- (film 4) photoisomerization and reversible switching of the surface wettability between a low wetting state (cis-stilbene) and a high wetting state (trans-stilbene). The difference in observed behavior between films 1 and 2 and films 3 and 4 is attributed to the greater surface spacing afforded by the mixed monolayer, which allows greater conformational flexibility and lowers the steric barriers to isomerization.

Surface-based lithium ion sensor: An electrode derivatized with a self-assembled monolayer.

Self-assembled monolayers (SAMs) of 21-(16-mercaptohexadecan-1-oyl)-4,7,13,16-tetraoxa-1,10,21-triazabicyclo[8.8.5]tricosane-19,23-dione were prepared on gold. Characterization of the SAMs was carried out by sessile drop contact angle, ellipsometry, grazing angle FT-IR spectroscopy, and electrochemical techniques. The cation recognition properties of the SAM were studied by cyclic voltammetry and impedance spectroscopy. The films show moderate selectivity for detection of Li+ ions in solution over K+ and Na+, with selectivity values calculated to be log K(Li+,Na+) approximately -1.30 and log K(Li+,K+) approximately -0.92. To the best of our knowledge, this is the first demonstration of a lithium sensor fabricated using self-assembled monolayer technology.

A highly selective bicyclic fluoroionophore for the detection of lithium ions.

The macrobicyclic molecule, 21-(9-anthrylmethyl)-4,17,13,16-tetraoxa-1,10,21-triazabicyclo [8.8.5]tricosane-19,23-dione, I, was designed, synthesized and characterized as a fluoroionophore for the selective, optical detection of lithium ions. Compound I is based on a bridged diazacrown structure, which provides a semirigid binding framework. Binding takes place by electrostatic interactions between the oxygen atoms of the crown and the cation and is transduced to fluorescence emission from an attached anthracene fluorophore. In a 75:25 dichloromethane/tetrahydrofuran solvent mixture, I acts as an intramolecular electron transfer "off-on" fluorescence switch, exhibiting a greater than 190-fold enhancement in fluorescence emission intensity in the presence of lithium ions. The relative selectivity of I for lithium ions over sodium, potassium and ammonium ions was found to be log K(Li+,Na+) approximately -3.36, log K(Li+,K+) approximately -1.77 and log K(Li+,NH4+) approximately -2.78.