Role of Pickering stabilization and bulk gelation for the preparation and properties of solid silica foams.

Foaming of particulate suspensions, followed by foam drying, is developed as an efficient method for production of highly porous materials with various applications. A key factor for success is the appropriate choice of surfactants which both modify the particle surface and stabilize the foam. Here we compare the efficiency of this method for silica suspensions containing two surfactants which lead to very different types of foam stabilization. Cationic TTAB leads to particle-stabilized foams (Pickering stabilization) whereas zwitterionic CAPB - to surfactant-stabilized foams. Thus we determined the general (common) features shared between the various surfactant systems: (1) The foaminess is controlled exclusively by the suspension viscosity under shearing conditions which mimic precisely the foaming process; (2) The foam stability to drainage and coarsening is controlled exclusively by the suspension yield stress; (3) The surfactant adsorption on the particle surface should occur in the time scale of seconds to minutes, thus ensuring appropriate rheological properties of the foaming suspension. Similar kinetic effects could be of high interest to other colloid systems and processes, e.g. for kinetic control of the internal structure and properties of aerogels produced from sheared suspensions, and for control of the transient rheological properties and non-Newtonian flow of particulate gels.

Key role of receptor density in colloid/cell specific interaction: a quantitative biomimetic study on giant vesicles.

This paper presents an experimental study of the adsorption of colloids on model membranes mediated by specific ligand-receptor interactions. The colloids consist of lipid multilamellar liposomes (spherulites) functionalized with the B-subunit of Shiga Toxin (STxB), while the membranes are lipid Giant Unilamellar Vesicles (GUV) containing STxB lipid receptor, Globotriaosylceramide (Gb3). Through confocal microscopy and flow cytometry, we show the specificity of the adsorption. Moreover, we show that flow cytometry can be used to efficiently quantify the kinetics of colloid adsorption on GUVs with very good statistics. By varying the bulk colloid concentration and receptor density in the membrane, we point out the existence of an optimum Gb3 density for adsorption. We propose that this optimum corresponds to a transition between reversible colloid adsorption at low Gb3 density and irreversible adsorption, and likely spherulite fusion, at high density. We compare our results both to STxB-colloids adhering on living cells and to free STxB proteins interacting with GUVs containing Gb3. This biomimetic system could be used for a quantitative evaluation of the early stage of virus infection or drug delivery.

Adhesion enhancement through micropatterning at polydimethylsiloxane-acrylic adhesive interfaces.

Adhesion at polydimethylsiloxane (PDMS)-acrylic adhesive interfaces is shown to be enhanced through micropatterning of the PDMS substrate. By varying the geometry of the patterns (groves and hexagonal arrays of pillars of micrometer sizes, obtained through soft lithography techniques) and comparing rigid and deformable substrates, the respective roles of the geometry and the size and flexibility of the pattern features on the level of adhesion have been analyzed. For cylindrical pillars, two regimes are clearly identified: for a relatively low aspect ratio (h/r < 3, with h and r, respectively, the height and the radius of the pillars), soft patterned substrates are more efficient than rigid ones at increasing adhesion, pointing out the role of the elastic energy associated with the deformation of the pattern that is lost when the adhesive detaches from the substrate. Using scaling laws, the predominant contribution to that elastic energy can be further identified: deformation of the substrate underlying the pillars for h/r < 1.6 or bending of the pillars for h/r > 1.6.; for a high aspect ratio (h/r > 3), only rigid patterned substrates enhance adhesion, then the only possible contribution to energy dissipation comes from the enhanced viscoelastic losses associated with the pattern that induce modifications of the strain field within the adhesive layer. Soft, high aspect ratio patterns lose their efficiency even if still bent under the effect of the peel forces. This is because when bent, some of the pillars touch each other and remain stuck together, lying flat on the surface after the passage of the peel front. The bending elastic energy of the pillars (which is still lost) is then balanced by the corresponding gain in surface energy of the substrate in the peeled region. These systematic experiments demonstrate that the ability of the patterned surface to be deformed plays a crucial role in enhancing adhesion and allow us to propose a way to fine tune the level of adhesion at PDMS-acrylic adhesive interfaces, independently of the chemistry of the adhesive.