HPM live µ for a full CLEM workflow.

With the development of advanced imaging methods that took place in the last decade, the spatial correlation of microscopic and spectroscopic information-known as multimodal imaging or correlative microscopy (CM)-has become a broadly applied technique to explore biological and biomedical materials at different length scales. Among the many different combinations of techniques, Correlative Light and Electron Microscopy (CLEM) has become the flagship of this revolution. Where light (mainly fluorescence) microscopy can be used directly for the live imaging of cells and tissues, for almost all applications, electron microscopy (EM) requires fixation of the biological materials. Although sample preparation for EM is traditionally done by chemical fixation and embedding in a resin, rapid cryogenic fixation (vitrification) has become a popular way to avoid the formation of artifacts related to the chemical fixation/embedding procedures. During vitrification, the water in the sample transforms into an amorphous ice, keeping the ultrastructure of the biological sample as close as possible to the native state. One immediate benefit of this cryo-arrest is the preservation of protein fluorescence, allowing multi-step multi-modal imaging techniques for CLEM. To minimize the delay separating live imaging from cryo-arrest, we developed a high-pressure freezing (HPF) system directly coupled to a light microscope. We address the optimization of sample preservation and the time needed to capture a biological event, going from live imaging to cryo-arrest using HPF. To further explore the potential of cryo-fixation related to the forthcoming transition from imaging 2D (cell monolayers) to imaging 3D samples (tissue) and the associated importance of homogeneous deep vitrification, the HPF core technology has been revisited to allow easy modification of the environmental parameters during vitrification. Lastly, we will discuss the potential of our HPM within CLEM protocols especially for correlating live imaging using the Zeiss LSM900 with electron microscopy.

Exploring the biomechanical load of a sliding on the skin: understanding the acute skin injury mechanism of player-surface interaction.

BACKGROUND: Currently, there is a shortage of biomechanical data regarding acute skin injury mechanisms that are involved in player-surface contact in soccer on artificial turf. It is hypothesized that peak loads on the skin during the landing phase are an important factor in causing an acute skin injury. METHODS: Simultaneously, video analysis and load measurements using an in-ground force plate of the landing phase of a sliding tackle were recorded and correlated with observed clinical skin lesions. RESULTS: Video analysis revealed two sliding techniques: a horizontal jump and a sliding-in technique. The first technique resulted in both significantly higher vertical and horizontal peak forces during impact on the knee (2.3±0.4 kN and 1.4±0.5 kN) and thigh (4.9±0.9 kN and 1.8±0.5 kN). In combination with the observed skin lesion areas, a combined normal-shear stress of at least 24 and 14 N.cm-2 induce abrasion injuries on dry artificial turf. CONCLUSIONS: The findings of this study confirm that high peak stresses during the landing phase of a sliding is critical for inducing skin injuries on the knee and thigh. Reducing these peak shear stresses could be an important first step towards preventive measures.

Understanding the Acute Skin Injury Mechanism Caused by Player-Surface Contact During Soccer: A Survey and Systematic Review.

BACKGROUND: Superficial skin injuries are considered minor, and their incidence is probably underestimated. Insight into the incidence and mechanism of acute skin injury can be helpful in developing suitable preventive measures and safer playing surfaces for soccer and other field sports. PURPOSE: To gain insight into the incidence and severity of skin injuries related to soccer and to describe the skin injury mechanism due to player-surface contact. STUDY DESIGN: Systematic review; Level of evidence, 4. METHODS: The prevention model by van Mechelen et al (1992) combined with the injury causation model of Bahr and Krosshaug (2005) were used as a framework for the survey to describe the skin injury incidence and mechanism caused by player-surface contact. RESULTS: The reviewed literature showed that common injury reporting methods are mainly based on time lost from participation or the need for medical attention. Because skin abrasions seldom lead to absence or medical attention, they are often not reported. When reported, the incidence of abrasion/laceration injuries varies from 0.8 to 6.1 injuries per 1000 player-hours. Wound assessment techniques such as the Skin Damage Area and Severity Index can be a valuable tool to obtain a more accurate estimation of the incidence and severity of acute skin injuries. CONCLUSION: The use of protective equipment, a skin lubricant, or wet surface conditions has a positive effect on preventing abrasion-type injuries from artificial turf surfaces. The literature also shows that essential biomechanical information of the sliding event is lacking, such as how energy is transferred to the area of contact. From a clinical and histological perspective, there are strong indications that a sliding-induced skin lesion is caused by mechanical rather than thermal injury to the skin.

In vivo comparison between laser-treated and grit blasted/acid etched titanium.

OBJECTIVE: Laser profiling of titanium has been of considerable interest in the field of oral implantology. However, very few pre-clinical and clinical studies have been performed with laser-treated implants, especially focusing on isotropic roughness topography. The aim of the study was to compare the cortical bone response of Ti-implants discs treated with pico-sec pulsed laser (LAS) and conventional grit-blasted/acid-etched (GAE) method. MATERIALS AND METHODS: Prior to the in vivo experiment, in vitro cell viability testing of the LAS surface treatment was preformed. Then, 5 mm diameter Titanium (Ti) discs treated with LAS and GAE method were implanted in a pre-validated rabbit tibia cortical bone model and assessed with histology and histomorphometric measurements. In total, eight New Zealand White adult female rabbits were used. RESULTS: The in vitro cell viability testing with osteoblast-like cells confirmed cytocompatibility of the LAS surface treatment. Further, the rabbit experiment demonstrated a bone-to-implant contact of 68% (±17) for the laser-treated discs and 49% (±21) for the GAE discs 8 weeks after the implantation, which was statistically not different. CONCLUSION: Laser surface treatment gives the same results to the grit-blasting/acid-etched method and thus is a valid alternative to conventional roughening for dental implant materials.

The effect of nanometric surface texture on bone contact to titanium implants in rabbit tibia.

Designing biomaterial surfaces to control the reaction of the surrounding tissue is still considered to be a primary issue, which needs to be addressed systematically. Although numerous in vitro studies have described different nano-metrically textured substrates capable to influence bone cellular response, in vivo studies validating this phenomenon have not been reported. In this study, nano-grooved silicon stamps were produced by laser interference lithography (LIL) and reactive ion etching (RIE) and were subsequently transferred onto the surface of 5 mm diameter Titanium (Ti) discs by nanoimprint lithography (NIL). Patterns with pitches of 1000 nm (500 nm ridge and groove, 150 nm depth), 300 nm (150 nm ridge and groove, 120 nm depth; as well as a 1:3 ratio of 75 nm ridge and 225 nm groove, 120 nm depth) and 150 nm (75 nm ridge and groove, 30 nm depth) were created. These samples were implanted in a rabbit tibia cortical bone. Histological evaluation and histomorphometric measurements were performed, comparing each sample to conventional grit-blasted/acid-etched (GAE) titanium controls. Results showed a significantly higher bone-to-implant contact at 4 weeks for the 300 nm (1:3) specimens, compared to GAE (p = 0.006). At 8 weeks, there was overall more bone contact compared to 4 weeks. However, no significant differences between the nano-textured samples and the GAE occurred. Further studies will need to address biomechanical testing and the use of trabecular bone models.

Understanding the role of nano-topography on the surface of a bone-implant.

Bone-implant material development is proceeding at a high pace, and has shifted from straightforward biomaterial testing to more advanced cell-targeted approaches for surface modification and design. It has been long known that cells can recognize and respond to topographical features by changing their morphology and behavior. The progress in surface analytical devices, as well as in techniques for production of topographical features on the nanometer scale allow for the characterization of natural tissues and the reproduction of biomimetic nanofeatures in material surfaces. In this review some of the most common surface-characterization and surface-manufacturing techniques will be addressed and results from in vitro and in vivo studies will be presented. Knowledge on biomaterial nanotopography can be exploited for active stimulation and control of cellular behavior like attachment, migration, spreading, gene expression, proliferation, differentiation and secretion of matrix components.

Production and characterization of miro- and nano-features in biomedical alumina and zirconia ceramics using a tape casting route.

A process of micromolding, delivering micro- and nanopatterned ceramic surfaces for biomaterial applications is described in this work. To create the desired structures, tape casting of ceramic slurries on microfabricated silicon mold was used. Several tape casting slurry compositions were tested to evaluate the feasibility of transferring micro- and nano-features from silicon molds. Used ceramics were alumina (α-Al(2)O(3)) and yttria stabilized zirconia. Three types of polymeric binders for the green tape (PVB, PES, and PVP) were investigated using three different solvents (ethanol, n-methyl-pyrrolidone, water). Well-defined features in shapes of wells with diameters down to 2.4 µm and a depth of 10 µm and pillars with diameters down to 1.7 µm and a height of 3 µm were obtained. Morphology, grain size and porosity of the sintered bodies were characterized. Finally fibroblast cells were cultured on the surfaces in order to observe their morphology under influence of the microstructured surfaces.

In vitro and in vivo evaluation of the inflammatory response to nanoscale grooved substrates.

The immune response to an implanted biomaterial is orchestrated by macrophages. In this study various nanogrooved patterns were created by using laser interference lithography and reactive ion etching. The created nanogrooves mimic the natural extracellular matrix environment. Macrophage cell culture demonstrated that interleukin 1ß and TNF-α cytokine production were upregulated on nanogrooved substrates. In vivo subcutaneous implantation in a validated mouse cage model for 14 days demonstrated that nanogrooves enhanced and guided cell adhesion, and few multinucleated cells were formed. In agreement with the in vitro results, cytokine production was found to be nanogroove dependent, as interleukin 1ß, TNF-α, TGF-ß and osteopontin became upregulated. The results indicate that biomaterial surface texturing, especially at the nanometric scale, can be used to control macrophage activation to induce a wound healing response, rather than a profound inflammatory response. From the Clinical Editor: The authors investigate various nano-grooved patterns that mimic the natural extracellular matrix environment and demonstrate (both in macrophage cultures and in vivo) that interleukin 1ß and TNF-α cytokine production is dependent upon surface texturing at the nanometric scale. They propose that modified surfaces may trigger macrophage activation to promote a wound healing response.

Cryo DualBeam Focused Ion Beam-Scanning Electron Microscopy to Evaluate the Interface Between Cells and Nanopatterned Scaffolds.

With the advance of nanotechnology in biomaterials science and tissue engineering, it is essential that new techniques become available to observe processes that take place at the direct interface between tissue and scaffold materials. Here, Cryo DualBeam focused ion beam-scanning electron microscopy (FIB-SEM) was used as a novel approach to observe the interactions between frozen hydrated cells and nanometric structures in high detail. Through a comparison of images acquired with transmission electron microscopy (TEM), conventional FIB-SEM operated at ambient temperature, and Cryo DualBeam FIB-SEM, the advantages and disadvantages of each technique were evaluated. Ultrastructural details of both (extra)cellular components and cell organelles were best observe with TEM. However, processing artifacts such as shrinkage of cells at the substrate interface were introduced in both TEM and conventional FIB-SEM. In addition, the cellular contrast in conventional FIB-SEM was low; consequently, cells were difficult to distinguish from the adjoining substrate. Cryo DualBeam FIB-SEM did preserve (extra)cellular details like the contour, cell membrane, and mineralized matrix. The three described techniques have proven to be complementary for the evaluation of processes that take place at the interface between tissue and substrate.

The interaction between nanoscale surface features and mechanical loading and its effect on osteoblast-like cells behavior.

Osteoblasts respond to mechanical stimulation by changing morphology, gene expression and matrix mineralization. Introducing surface topography on biomaterials, independently of mechanical loading, has been reported to give similar effects. In the current study, using a nanotextured surface, and mechanical loading, we aimed to develop a multi-factorial model in which both parameters interact. Mechanical stimulation to osteoblast-like cells was applied by longitudinal stretch in parallel direction to the nanotexture (300 nm wide and 60 nm deep grooves), with frequency of 1 Hz and stretch magnitude varying from 1% to 8%. Scanning electron microscopy showed that osteoblast-like cells subjected to mechanical loading oriented perpendicularly to the stretch direction. When cultured on nanotextured surfaces, cells aligned parallel to the texture. However, the parallel cell direction to the nanotextured surface was lost and turned to perpendicular when parallel stretch to the nanotexture, greater than 3% was applied to the cells. This phenomenon could not be achieved when a texture with micro-sized dimensions was used. Moreover, a significant synergistic effect on upregulation of fibronectin and Cfba was observed when dual stimulation was used. These findings can lead to a development of new biomimetic materials that can guide morphogenesis in tissue repair and bone remodeling.

The influence of nanoscale grooved substrates on osteoblast behavior and extracellular matrix deposition.

To fight bone diseases characterized by poor bone quality like osteoporosis and osteoarthritis, as well as in reconstructive surgery, there is a need for a new generation of implantable biomaterials. It is envisioned that implant surfaces can be improved by mimicking the natural extracellular matrix of bone tissue, which is highly a organized nano-composite. In this study we aimed to get a better understanding of osteoblast response to nanometric grooved substrates varying in height, width and spacing. A throughput screening biochip was created using electron beam lithography. Subsequently, uniform large-scale nanogrooved substrates were created using laser interference lithography and reactive ion etching. Results showed that osteoblasts were responsive to nanopatterns down to 75 nm in width and 33nm in depth. SEM and TEM studies showed that an osteoblast-driven calcium phosphate (CaP) mineralization was observed to follow the surface pattern dimensions. Strikingly, aligned mineralization was found on even smaller nanopatterns of 50 nm in width and 17 nm in depth. A single cell based approach for real time PCR demonstrated that osteoblast-specific gene expression was increased on nanopatterns relative to a smooth control. The results indicate that nanogrooves can be a very promising tool to direct the bone response at the interface between an implant and the bone tissue.