ABSTRACT
In recent years, cold spray technology has attracted more and more attentions. After more than 30 years of rapid development, research focus of cold spray technology is gradually shifting from fundamental and theoretical studies to application developments, some of which have been industrialized and mass-produced. In this paper, the characteristics of cold spray technology, cold spray materials perspectives and cold spray system developments were briefly introduced. Besides, the recent developments of cold spray applications in different fields including aerospace, biomedical, energy, electronics, semiconductor fields were discussed. Although cold spray technology is in the early stages of implementation, it has demonstrated a great potential to reduce costs and improve performance. World-wide awareness of ongoing and planned cold spray programs is critical to expand its applications and benefits.
ABSTRACT
Six new metal-organic coordination polymers (CPs) [Ni(L)(2,5-TDC)(H2O)] n (1), [Ni(L)(1,3-BDC)(H2O)] n (2), [Ni(L)(1,4-BDC)(H2O)] n (3), [Mn(L)(2,5-TDC)(H2O)] n (4), [Mn(L)(2,6-PYDC)(H2O)] n (5) and [Mn(L)(1,4-NDC)] n (6) were achieved by reactions of the corresponding metal salt with mixed organic ligands (L = 3,6-bis(benzimidazol-1-yl)pyridazine, 2,5-H2TDC = thiophene-2,5-dicarboxylic acid, 1,3-H2BDC = isophthalic acid, 1,4-H2BDC = terephthalic acid, 2,6-H2PYDC = pyridine-2,6-dicarboxylic acid, 1,4-H2NDC = naphthalene-1,4-dicarboxylic acid) under solvothermal condition. CPs 1-6 were characterized by single-crystal X-ray diffraction, IR, TG, XRD and elemental analyses. Their structures range from the intricate 3D CPs 1, 3, 4 and 6 to the 2D coordination polymer 2 and the infinite 1D chain 5. The CPs 1-4 and 6 underlying networks were classified from the topological viewpoint, disclosing the distinct sql (in 1), pcu (in 3 and 6), new topology (in 2), and dia (in 4) topological nets. Moreover, analysis of thermal stability shows that they had good thermal stability. Finally, magnetic properties of CPs 1-6 have been studied, the results showed that complex 2 had ferromagnetic coupling and complexes 1, 3-6 were antiferromagnetic.
ABSTRACT
3D bioprinting is an emerging technology that drives us to construct the complicated tissues and organs consisting of various materials and cells, which has been in widespread use in tissue engineering and organ regeneration. However, the protection and accurate distribution of cells are the most urgent problems to achieve tissue and organ reconstruction. In this article, a multinozzle multichannel temperature deposition and manufacturing (MTDM) system is proposed to fabricate a blood vessel with heterogeneous materials and gradient hierarchical porous structures, which enables not only the reconstruction of a blood vessel with an accurate 3D model structure but also the capacity to distribute bioactive materials such as growth factors, nutrient substance, and so on. In addition, a coaxial focusing nozzle is proposed and designed to extrude the biomaterial and encapsulation material, which can protect the cell from damage. In the MTDM system, the tubular structure of a blood vessel was successfully fabricated with the different biomaterials, which proved that the MTDM system has a potential application prospect in tissue engineering and organ regeneration.
Subject(s)
Bioprinting/instrumentation , Bioprinting/methods , Blood Vessels/anatomy & histology , Blood Vessels/physiology , Printing, Three-Dimensional , Animals , Humans , Mice , Porosity , TemperatureABSTRACT
3D printing has emerged as one of the modern tissue engineering techniques that could potentially form scaffolds (with or without cells), which is useful in treating cardiovascular diseases. This technology has attracted extensive attention due to its possibility of curing disease in tissue engineering and organ regeneration. In this paper, we have developed a novel rotary forming device, prepared an alginateâ»gelatin solution for the fabrication of vessel-like structures, and further proposed a theoretical model to analyze the parameters of motion synchronization. Using this rotary forming device, we firstly establish a theoretical model to analyze the thickness under the different nozzle extrusion speeds, nozzle speeds, and servo motor speeds. Secondly, the experiments with alginateâ»gelatin solution are carried out to construct the vessel-like structures under all sorts of conditions. The experiment results show that the thickness cannot be adequately predicted by the theoretical model and the thickness can be controlled by changing the parameters. Finally, the optimized parameters of thickness have been adjusted to estimate the real thickness in 3D printing.
