Flexible liquid metal-based microfluidic strain sensors with fractal-designed microchannels for monitoring human motion and physiological signals.

With the rapid advancement of wearable electronics, there is an increasing demand for high-performance flexible strain sensors. In this work, a flexible strain sensor based on liquid metal (LM)-integrated into a microfluidic device is developed with Peano-type fractal structure design. Compared with the microfluidic sensors with straight and wavy microchannels, the sensor with Peano-shaped channels shows lower hysteresis and improved stretchability. Furthermore, the increase of the fractal order can further improve the sensing performances. The third-order Peano sensor exhibits excellent mechanical and electrical properties, including high tensile capability (490.3%), minimal hysteresis (DH = 0.86%), ultra-low detection limit (0.1%), low overshoot, rapid response time (117 ms), as well as good stability and durability. By adding two independent and perpendicular straight channels to the Peano sensing unit, the feasibility of multi-directional strain recognition is demonstrated. To further improve the sensitivity of the Peano-shaped sensor, a multi-layer Peano sensor is developed, exhibiting remarkably enhanced sensitivity while maintaining low hysteresis. Overall, the developed LM-based microfluidic strain sensors enrolling Peano fractal geometry hold high potential for various wearable electronics applications.

Phase Change Material-Embedded Multifunctional Janus Nanofiber Dressing with Directional Moisture Transport, Controlled Release of Anti-Inflammatory Drugs, and Synergistic Antibacterial Properties.

Wound healing is a systematic and complex process that involves various intrinsic and extrinsic factors affecting different stages of wound repair. Therefore, multifunctional wound dressings that can modulate these factors to promote wound healing are in high demand. In this work, a multifunctional Janus electrospinning nanofiber dressing with antibacterial and anti-inflammatory properties, controlled release of drugs, and unidirectional water transport was prepared by depositing coaxial nanofibers on a hydrophilic poly(ε-caprolactone)@polydopamine-ε-polyl-lysine (PCL@PDA-ε-PL) nanofiber membrane. The coaxial nanofiber was loaded with the phase change material lauric acid (LA) in the shell layer and anti-inflammatory ibuprofen (IBU) in the core layer. Among them, LA with a melting point of 43 °C served as a phase change material to control the release of IBU. The phase transition of LA was induced by near-infrared (NIR) irradiation that triggered the photothermal properties of PDA. Moreover, the Janus nanofiber dressing exhibited synergistic antimicrobial properties for Escherichia coli and Staphylococcus aureus due to the photothermal properties of PDA and antibacterial ε-PL. The prepared Janus nanofiber dressing also exhibited anti-inflammatory activity and biocompatibility. In addition, the Janus nanofiber dressing had asymmetric wettability that enabled directional water transport, thereby draining excessive wound exudate. The water vapor transmission test indicated that the Janus nanofiber dressing had good air permeability. Finally, skin wound healing evaluation in rats confirmed its efficacy in promoting wound healing. Therefore, this strategy of designing and manufacturing a multifunctional Janus nanofiber dressing had great potential in wound healing applications.

Study on Filtration Performance of PVDF/PUL Composite Air Filtration Membrane Based on Far-Field Electrospinning.

At present, the situation of air pollution is still serious, and research on air filtration is still crucial. For the nanofiber air filtration membrane, the diameter, porosity, tensile strength, and hydrophilicity of the nanofiber will affect the filtration performance and stability. In this paper, based on the far-field electrospinning process and the performance effect mechanism of the stacked structure fiber membrane, nanofiber membrane was prepared by selecting the environmental protection, degradable and pollution-free natural polysaccharide biopolymer pullulan, and polyvinylidene fluoride polymer with strong hydrophobicity and high impact strength. By combining two kinds of fiber membranes with different fiber diameter and porosity, a three-layer composite nanofiber membrane with better hydrophobicity, higher tensile strength, smaller fiber diameter, and better filtration performance was prepared. Performance characterization showed that this three-layer composite nanofiber membrane had excellent air permeability and filtration efficiency, and the filtration efficiency of particles above PM 2.5 reached 99.9%. This study also provides important reference values for the preparation of high-efficiency composite nanofiber filtration membrane.

Fabrication of bioinspired grid-crimp micropatterns by melt electrospinning writing for bone-ligament interface study.

Many strategies have been adopted to engineer bone-ligament interface, which is of great value to both the tissue regeneration and the mechanism understanding underlying interface regeneration. However, how to recapitulate the complexity and heterogeneity of the native bone-ligament interface including the structural, cellular and mechanical gradients is still challenging. In this work, a bioinspired grid-crimp micropattern fabricated by melt electrospinning writing (MEW) was proposed to mimic the native structure of bone-ligament interface. The printing strategy of crimped fiber micropattern was developed and the processing parameters were optimized, which were used to mimic the crimp structure of the collagen fibrils in ligament. The guidance effect of the crimp angle and fiber spacing on the orientation of fibroblasts was studied, and both of them showed different levels of cell alignment effect. MEW grid micropatterns with different fiber spacings were fabricated as bone region. Both the alkaline phosphatase activity and calcium mineralization results demonstrated the higher osteoinductive ability of the MEW grid structures, especially for that with smaller fiber spacing. The combined grid-crimp micropatterns were applied for the co-culture of fibroblasts and osteoblasts. The results showed that more cells were observed to migrate into the in-between interface region for the pattern with smaller fiber spacing, suggested the faster migration speed of cells. Finally, a cylindrical triphasic scaffold was successfully generated by rolling the grid-crimp micropatterns up, showing both structural and mechanical similarity to the native bone-ligament interface. In summary, the proposed strategy is reliable to fabricate grid-crimp triphasic micropatterns with controllable structural parameters to mimic the native bone-to-ligament structure, and the generated 3D scaffold shows great potential for the further bone-ligament interface tissue engineering.

Fabrication and in vitro evaluation of PCL/gelatin hierarchical scaffolds based on melt electrospinning writing and solution electrospinning for bone regeneration.

As an emerging 3D printing technique, melt electrospinning writing (MEW) has been used to fabricate scaffolds with controllable structure and good mechanical strength for bone regeneration. However, how to further improve MEW scaffolds with nanoscale extracellular matrix (ECM) mimic structure and bioactivity is still challenging. In this study, we proposed a simple composite process by combining MEW and solution electrospinning (SE) to fabricate a micro/nano hierarchical scaffold for bone tissue engineering. The morphological results confirmed the hierarchical structure with both well-defined MEW microfibrous grid structure and SE random nanofiber morphology. The addition of gelatin nanofibers turned the scaffolds to be hydrophilic, and led to a slight enhancement of mechanical strength. Compared with PCL MEW scaffolds, higher cell adhesion efficiency, improved cell proliferation and higher osteoinductive ability were achieved for the MEW/SE composite scaffolds. Finally, multilayer composite scaffolds were fabricated by alternately stacking of MEW layer and SE layer and used to assess the effect on cell ingrowth in the scaffolds. The results showed that gelatin nanofibers did not inhibit cell penetration, but promoted the three-dimensional growth of bone cells. Thus, the strategy of the combined use of MEW and SE is a potential method to fabricate micro/nano hierarchical scaffolds to improve bone regeneration.

Coaxial electrospun PVA/PCL nanofibers with dual release of tea polyphenols and ε-poly (L-lysine) as antioxidant and antibacterial wound dressing materials.

Preparing wound dressing with dual-delivery of antioxidant and antibacterial agents is highly desirable in clinical wound treatment. Herein, a series of coaxial nanofiber membranes loaded with antioxidant tea polyphenols (TP) in the core and antibacterial ε-poly (L-lysine) (ε-PL) in the shell layer were successfully fabricated by coaxial electrospinning. The physicochemical characterizations by transmission electron microscopy, inverted fluorescence microscopy and fourier transform infrared spectroscopy confirmed the formation of core-shell structure. The results of in vitro drug release indicated that ε-PL exhibited a fast release profile while TP released in a sustained manner, which is favorable to the achievement of quick bacteria inhibition in the initial phase as well as long-term antioxidant activity during wound healing. The antioxidant activity of coaxial nanofibers was found to be increased with the increment of TP content and incubation time. The antibacterial assays against Escherichia coli and Staphylococcus aureus demonstrated that the incorporation of ε-PL in the coaxial nanofibers led to strong antibacterial activity. Additionally, all the coaxial nanofibers possessed good cytocompatibility. Therefore, the prepared coaxial nanofibers simultaneously incorporated with ε-PL and TP are promising as potential wound dressing materials.

Multidrug-loaded electrospun micro/nanofibrous membranes: Fabrication strategies, release behaviors and applications in regenerative medicine.

Electrospun micro/nanofibrous membranes (EFMs) have been widely investigated as local drug delivery systems. Multiple drugs can be simultaneously incorporated into one EFM to create synergistic effects, reduce side effects, and play their respective roles in the complex physiological processes of tissue regeneration and postoperative adhesion prevention. Due to the versatile electrospinning techniques, sustained and programmed release behaviors of multiple drugs could be achieved by modulating the structure of the EFMs and the location of the drugs. In this review, various multidrug incorporation approaches based on electrospinning are overviewed. In particular, the advantages and limitations of each drug incorporation technique, the methods to control drug release and the effect of one drug release on another are discussed. Then the applications of multidrug-loaded EFMs in regenerative medicine, including wound healing, bone regeneration, vascular tissue engineering, nerve regeneration, periodontal regeneration and adhesion prevention are comprehensively reviewed. Finally, the future perspectives and challenges in the research of multidrug-loaded EFMs are discussed.

Angelica Essential Oil Loaded Electrospun Gelatin Nanofibers for Active Food Packaging Application.

The development of food packaging possessing bioactivities which could extend the shelf life of food has gained increased interest in recent years. In this study, gelatin nanofibers with encapsulated angelica essential oil (AEO) were fabricated via electrospinning. The morphology of gelatin/AEO nanofibers was examined by scanning electron microscopy (SEM) and the addition of AEO resulted in the increase of fiber diameter. The proton nuclear magnetic resonance (1H-NMR) spectra were measured to confirm the presence of AEO in nanofibers. The hydrophobic property of gelatin nanofibers was also found to be improved with the addition of AEO. The nanofibers incorporated with AEO showed significant antioxidant activity and inhibitory effect against both Gram-negative and Gram-positive bacteria in a concentration dependent manner. Furthermore, the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay demonstrated that the developed gelatin/AEO nanofibers revealed no cytotoxicity effect. Thus, gelatin nanofibers incorporated with AEO can be used as potential food packaging.

Melt electrohydrodynamic 3D printed poly (ε-caprolactone)/polyethylene glycol/roxithromycin scaffold as a potential anti-infective implant in bone repair.

Implanted scaffold or bone substitute is a common method to treat bone defects. However, the possible bone infection caused by orthopaedic surgery has created a challenging clinical problem and generally invalidate bone repair and regeneration. In this study, a poly (ε-caprolactone) (PCL)/polyethylene glycol (PEG)/roxithromycin (ROX) composite scaffold was prepared via melt electrohydrodynamic (EHD) 3D printing. Fourier transform infrared spectroscopy (FTIR) spectroscopy was performed to verify the existence of PEG and ROX in the scaffolds. By water contact angle measurement, the addition of both PEG and ROX was found to improve the hydrophilicity of the scaffolds. By in vitro drug release assay, the PCL/PEG/ROX scaffolds showed an initial burst drug release and subsequent long-term sustained release behaviour, which is favourable for the prevention and treatment of bone infections. The antibacterial assays against E. coli and S. aureus demonstrated that the composite scaffold with ROX possessed effective antibacterial activity, especially for S. aureus, the main cause of bone infection. The immunostaining and MTT assay with human osteoblast-like cells (MG63) indicated that cells showed good viability and growth on the scaffolds. Therefore, the melt EHD 3D printed PCL/PEG/ROX scaffold could be a promising anti-infective implant for bone tissue engineering.

Honey loaded alginate/PVA nanofibrous membrane as potential bioactive wound dressing.

Honey is an ancient natural wound-healing agent and has been reintroduced to modern clinical wound care as it has various bioactivities. In this study, honey was incorporated into an alginate/PVA-based electrospun nanofibrous membrane to develop an efficient wound dressing material. The morphology and chemical composition of the nanofibrous membrane were observed by scanning electron microscopy and characterized via Fourier transform infrared spectroscopy, respectively, demonstrating that honey was successfully introduced to the nanofibers. The nanofibrous membranes with increasing honey content showed enhanced antioxidant activity, suggesting the ability to control the overproduction of reactive oxygen species. Disc diffusion assay and dynamic contact assay proved the antibacterial activity of the honey loaded nanofibers towards Gram-positive bacterium (Staphylococcus aureus) and Gram-negative bacterium (Escherichia coli). The cytotoxicity assay illustrated the non-cytotoxicity and biocompatibility of the nanofibrous membranes. Therefore, the developed honey/alginate/PVA nanofibrous membranes are promising for wound dressings.

Electrospun Gelatin Nanofibers Encapsulated with Peppermint and Chamomile Essential Oils as Potential Edible Packaging.

Natural and edible materials have attracted increasing attention in food packaging, which could overcome the serious environmental issues caused by conventional non-biodegradable synthetic packaging. In this work, gelatin nanofibers incorporated with two kinds of essential oil (EO), peppermint essential oil (PO) and chamomile essential oil (CO), were fabricated by electrospinning for potential edible packaging application. Electron microscopy showed that smooth and uniform morphology of the gelatin/EOs was obtained, and the diameter of nanofibers was mostly enlarged with the increase of the EO content. The proton nuclear magnetic resonance spectrum confirmed the existence of PO and CO in nanofibers after electrospinning. The addition of EOs led to an enhancement of the water contact angle of nanofibers. The antioxidant activity was significantly improved for the nanofibers loaded with CO, while the antibacteria activity against Escherichia coli and Staphylococcus aureus was better for the fibers with PO addition. The combination of half PO and half CO in nanofibers compensated for their respective limitations and exhibited optimum bioactivities. Finally, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay with NIH-3T3 fibroblasts demonstrated the absence of cytotoxicity of the gelatin/EO nanofibers. Thus, our studies suggest that the developed gelatin/PO/CO nanofiber could be a promising candidate for edible packaging.