Construction of Thiadiazole-Bridged sp2-Carbon-Conjugated Covalent Organic Frameworks with Diminished Excitation Binding Energy Toward Superior Photocatalysis.

Sp2-carbon-conjugated covalent organic frameworks (sp2c-COFs) have emerged as promising platforms for phototo-chemical energy conversion due to their tailorable optoelectronic properties, in-plane π-conjugations, and robust structures. However, the development of sp2c-COFs in photocatalysis is still highly hindered by their limited linkage chemistry. Herein, we report a novel thiadiazole-bridged sp2c-COF (sp2c-COF-ST) synthesized by thiadiazole-mediated aldol-type polycondensation. The resultant sp2c-COF-ST demonstrates high chemical stability under strong acids and bases (12 M HCl or 12 M NaOH). The electro-deficient thiadiazole together with fully conjugated and planar skeleton endows sp2c-COF-ST with superior photoelectrochemical performance and charge-carrier separation and migration ability. As a result, when employed as a photocathode, sp2c-COF-ST exhibits a significant photocurrent up to ∼14.5 µA cm-2 at 0.3 V vs reversible hydrogen electrode (RHE) under visible-light irradiation (>420 nm), which is much higher than those analogous COFs with partial imine linkages (mix-COF-SNT ∼ 9.5 µA cm-2) and full imine linkages (imi-COF-SNNT ∼ 4.9 µA cm-2), emphasizing the importance of the structure-property relationships. Further temperature-dependent photoluminescence spectra and density functional theory calculations demonstrate that the sp2c-COF-ST has smaller exciton binding energy as well as effective mass in comparison to mix-COF-SNT and imi-COF-SNNT, which suggests that the sp2c-conjugated skeleton enhances the exciton dissociation and carrier migration under light irradiation. This work highlights the design and preparation of thiadiazole-bridged sp2c-COFs with promising photocatalytic performance.

Electronic Transmission Channels Promoting Charge Separation of Conjugated Polymers for Photocatalytic CO2 Reduction with Controllable Selectivity.

Conjugated polymers (CPs) represent a promising platform for photocatalytic CO2 fixation owing to their suitable band structures that meet the requirements of the reduction potential of CO2 to value-added fuels. However, the photocatalytic performance of CPs is rather restrained by the low charge transfer efficiency. Herein, we rationally designed three CPs with a more delocalized electronic transmission channel and planar molecular structure, which are regarded to evidently reduce the exciton binding energy (Eb ) and accelerate the internal charge transfer process. Besides, the assembly of suitable electron-output "tentacles" and cocatalysts on the surface of CPs could effectively facilitate interfacial electron delivery. Accordingly, the optimal P-2CN exhibits an apparent quantum yield of 4.6 % at 420 nm for photocatalytic CO2 to CO. Further adjusting the amounts of cyano groups and cocatalysts, the CO selectivity could be obtained in the range of 0-80.5 %.

Structure-Property Relationship of Cyano-Functionalized Conjugated Polymers for Photocatalytic Hydrogen Production.

Conjugated polymers (CPs) have garnered increasing attention in the field of photocatalysis due to their stability and molecular tunability. Understanding the structure-property relationship in CPs and addressing appropriate molecular design strategies are pivotal to improving the photocatalytic performance of CPs. Herein, a new efficient cyano (CN) engineering approach was proposed to promote the photocatalytic performance of CPs, and three representative CP-based photocatalysts with different CN contents were tailor-made to investigate the relationship between CN functionalization and photocatalytic activity. A series of systematically experimental and theoretical studies reveal that CN functionalization contributes to strengthening the donor-acceptor (D-A) interaction, enhancing the light absorption ability, charge separation/transfer efficiency, and hydrophilicity of CPs, and also facilitating the output of separated photoinduced electrons from CPs to Pt cocatalyst. Thus, the dicyano-functionalized polymer (P-2CN) manifests an attractive photocatalytic performance in hydrogen production. This study provides a facile strategy to develop excellent CP-based photocatalysts for solar fuel production.

Molecular Design of Covalent Triazine Frameworks with Anisotropic Charge Migration for Photocatalytic Hydrogen Production.

Covalent triazine frameworks (CTFs) represent promising polymeric photocatalysts for photocatalytic hydrogen production with visible light. However, the separation and transfer of charges in CTFs are isotropic because of the uniform distribution of donor-acceptor motifs in the skeleton. Herein, to achieve the anisotropic charge carrier separation and migration, thiophene (Th) or benzothiadiazole (BT) unit is selected as the dopant to modify the molecular structure of CTF-based photocatalysts. Both theoretical and experimental studies reveal that the incorporation of Th or BT units induces the anisotropic charge carrier separation and migration at the interface of CTFs. The optimized polymer manifests a much enhanced photocatalytic activity for photocatalytic hydrogen production with visible light, and thus this study provides a useful tool to design conjugated polymer photocatalysts at the molecular level for solar energy conversion.

Ionothermal Synthesis of Covalent Triazine Frameworks in a NaCl-KCl-ZnCl2 Eutectic Salt for the Hydrogen Evolution Reaction.

Covalent triazine-based frameworks (CTFs) are typically produced by the salt-melt polycondensation of aromatic nitriles in the presence of ZnCl2 . In this reaction, molten ZnCl2 salt acts as both a solvent and Lewis acid catalyst. However, when cyclotrimerization takes place at temperatures above 300 °C, undesired carbonization occurs. In this study, an ionothermal synthesis method for CTF-based photocatalysts was developed using a ternary NaCl-KCl-ZnCl2 eutectic salt (ES) mixture with a melting point of approximately 200 °C. This temperature is lower than the melting point of pure ZnCl2 (318 °C), thus providing milder salt-melt conditions. These conditions facilitated the polycondensation process, while avoiding carbonization of the polymeric backbone. The resulting CTF-ES200 exhibited enhanced optical and electronic properties, and displayed remarkable photocatalytic performance in the hydrogen evolution reaction.

A Fully Coplanar Donor-Acceptor Polymeric Semiconductor with Promoted Charge Separation Kinetics for Photochemistry.

Charge generation and separation are regarded as the major constraints limiting the photocatalytic activity of polymeric photocatalysts. Herein, two new linear polyarylether-based polymers (PAE-CPs) with distinct linking patterns between their donor and acceptor motifs were tailor-made to investigate the influence of different linking patterns on the charge generation and separation process. Theoretical and experimental results revealed that compared to the traditional single-stranded linker, the double-stranded linking pattern strengthens donor-acceptor interactions in PAE-CPs and generates a coplanar structure, facilitating charge generation and separation, and enabling red-shifted light absorption. With these prominent advantages, the PAE-CP interlinked with a double-stranded linker exhibits markedly enhanced photocatalytic activity compared to that of its single-strand-linked analogue. Such findings can facilitate the rational design and modification of organic semiconductors for charge-induced reactions.

Thermal annealing-induced structural reorganization in polymeric photocatalysts for enhanced hydrogen evolution.

Herein, a facile reorganization of a triazine-based conjugated polymer structure was adopted to optimize the optical, electronic, and photocatalytic properties of the polymer. The optimal photocatalyst presents enhanced performance as compared to the pristine photocatalyst by a factor of 3. This demonstration provides a new strategy for the optimization of conjugated polymers for various photoredox applications.

Reducing the Exciton Binding Energy of Donor-Acceptor-Based Conjugated Polymers to Promote Charge-Induced Reactions.

Exciton binding energy has been regarded as a crucial parameter for mediating charge separation in polymeric photocatalysts. Minimizing the exciton binding energy of the polymers can increase the yield of charge-carrier generation and thus improve the photocatalytic activities, but the realization of this approach remains a great challenge. Herein, a series of linear donor-acceptor conjugated polymers has been developed to minimize the exciton binding energy by modulating the charge-transfer pathway. The results reveal that the reduced energy loss of the charge-transfer state can facilitate the electron transfer from donor to acceptor, and thus, more electrons are ready for subsequent reduction reactions. The optimized polymer, FSO-FS, exhibits a remarkable photochemical performance under visible light irradiation.

Photocatalytic Oxygen Evolution from Functional Triazine-Based Polymers with Tunable Band Structures.

Conjugated polymers (CPs) are emerging and appealing light harvesters for photocatalytic water splitting owing to their adjustable band gap and facile processing. Herein, we report an advanced mild synthesis of three conjugated triazine-based polymers (CTPs) with different chain lengths by increasing the quantity of electron-donating benzyl units in the backbone. Varying the chain length of the CTPs modulates their electronic, optical, and redox properties, resulting in an enhanced performance for photocatalytic oxygen evolution, which is the more challenging half-reaction of water splitting owing to the sluggish reaction kinetics. Our results could stimulate interest in these functional polymers where a molecular engineering strategy enables the production of suitable semiconductor redox energetics for oxygenic photosynthesis.

Surface engineering of graphitic carbon nitride polymers with cocatalysts for photocatalytic overall water splitting.

Graphitic carbon nitride based polymers, being metal-free, accessible, environmentally benign and sustainable, have been widely investigated for artificial photosynthesis in recent years for the photocatalytic splitting of water to produce hydrogen fuel. However, the photocatalytic stoichiometric splitting of pure water into H2 and O2 with a molecular ratio of 2 : 1 is far from easy, and is usually hindered by the huge activation energy barrier and sluggish surface redox reaction kinetics. Herein, we provide a concise overview of cocatalyst modified graphitic carbon nitride based photocatalysts, with our main focus on the modulation of the water splitting redox reaction kinetics. We believe that a timely and concise review on this promising but challenging research topic will certainly be beneficial for general readers and researchers in order to better understand the property-activity relationship towards overall water splitting, which could also trigger the development of new organic architectures for photocatalytic overall water splitting through the rational control of surface chemistry.

Optimizing Optical Absorption, Exciton Dissociation, and Charge Transfer of a Polymeric Carbon Nitride with Ultrahigh Solar Hydrogen Production Activity.

Polymeric or organic semiconductors are promising candidates for photocatalysis but mostly only show moderate activity owing to strongly bound excitons and insufficient optical absorption. Herein, we report a facile bottom-up strategy to improve the activity of a carbon nitride to a level in which a majority of photons are really used to drive photoredox chemistry. Co-condensation of urea and oxamide followed by post-calcination in molten salt is shown to result in highly crystalline species with a maximum π-π layer stacking distance of heptazine units of 0.292 nm, which improves lateral charge transport and interlayer exciton dissociation. The addition of oxamide decreases the optical band gap from 2.74 to 2.56 eV, which enables efficient photochemistry also with green light. The apparent quantum yield (AQY) for H2 evolution of optimal samples reaches 57 % and 10 % at 420 nm and 525 nm, respectively, which is significantly higher than in most previous experiments.

Conjugated Polymers: Catalysts for Photocatalytic Hydrogen Evolution.

Conjugated polymers, comprising fully π-conjugated systems, present a new generation of heterogeneous photocatalysts for solar-energy utilization. They have three key features, namely robustness, nontoxicity, and visible-light activity, for photocatalytic processes, thus making them appealing candidates for scale-up. Presented in this Minireview, is a brief summary on the recent development of various promising polymer photocatalysts for hydrogen evolution from aqueous solutions, including linear polymers, planarized polymers, triazine/heptazine polymers, and other related organic conjugated semiconductors, with a particular focus on the rational manipulation in the composition, architectures, and optical and electronic properties that are relevant to photophysical and photochemical properties. Some future trends and prospects for organic conjugated photocatalysts in artificial photosynthesis, by water splitting, are also envisaged.

Ultrafine Cobalt Catalysts on Covalent Carbon Nitride Frameworks for Oxygenic Photosynthesis.

The rational cooperation of sustainable catalysts with suitable light-harvesting semiconductors to fabricate photosynthetic device/machinery has been regarded as an ideal technique to alleviate the current worldwide energy and environmental issues. Cobalt based species (e.g., Co-Pi, Co3O4, and Co-cubene) have attracted particular attentions because they are earth-abundant, cost-acceptable, and more importantly, it shows comparable water oxidation activities to the noble metal based catalysts (e.g., RuO2, IrO2). In this contribution, we compared two general cocatalysts modification strategies, based on the surface depositing and bulk doping of ultrafine cobalt species into the sustainable graphitic carbon nitride (g-C3N4) polymer networks for oxygenic photosynthesis by splitting water into oxygen, electrons, and protons. The chemical backbone of g-C3N4 does not alter after both engineering modifications; however, in comparison with the bulk doping, the optical and electronic properties of the surface depositing samples are efficiently promoted, and the photocatalytic water oxidation activities are increased owing to much more exposed active sites, reduced overpotential for oxygen evolution and the accelerated interface charge mobility. This paper underlines the advantage of surface engineering to establish efficient advanced polymeric composites for water oxidation, and it opens new insights into the architectural design of binary hybrid photocatalysts with high reactivity and further utilizations in the fields of energy and environment.

Overall water splitting by Pt/g-C3N4 photocatalysts without using sacrificial agents.

We report the direct splitting of pure water by light-excited graphitic carbon nitride (g-C3N4) modified with Pt, PtO x , and CoO x as redox cocatalysts, while pure g-C3N4 is virtually inactive for overall water splitting by photocatalysis. The novelty is in the selective creation of both H2 and O2 cocatalysts on surface active sites of g-C3N4via photodeposition triggering the splitting of water for the simultaneous evolution of H2 and O2 gases in a stoichiometric ratio of 2 : 1, irradiated with light, without using any sacrificial reagents. The photocatalyst was stable for 510 hours of reaction.