ABSTRACT
Resonant optical phased arrays are a promising way to reach fully reconfigurable metasurfaces in the optical and near-infrared (NIR) regimes with low energy consumption, low footprint, and high reliability. Continuously tunable resonant structures suffer from inherent drawbacks such as low phase range, amplitude-phase correlation, or extreme sensitivity that makes precise control at the individual element level very challenging. We computationally investigate 1-bit (binary) control as a mechanism to bypass these issues. We consider a metasurface for beam steering using a nanoresonator antenna and explore the theoretical capabilities of such phased arrays. A thermally realistic structure based on vanadium dioxide sandwiched in a metal-insulator-metal structure is proposed and optimized using inverse design to enhance its performance at 1550 nm. Continuous beam steering over 90° range is successfully achieved using binary control, with excellent agreement with predictions based on the theoretical first-principles description of phased arrays. Furthermore, a broadband response from 1500 to 1700 nm is achieved. The robustness to the design manufacturing imperfections is also demonstrated. This simplified approach can be implemented to optimize tunable nanophotonic phased array metasurfaces based on other materials or phased shifting mechanisms for various functionalities.
ABSTRACT
A novel scheme for the expansion and phase correlation of a wavelength tunable gain-switched optical frequency comb (OFC) is presented. This method entails firstly combining two gain-switched OFCs and expanding them using a phase modulator. Subsequently, the phase correlation between all the comb lines is induced through four-wave mixing (FWM) in a semiconductor optical amplifier (SOA). In this article, the generation of 42 highly correlated comb lines separated by 6.25 GHz, with an optical carrier to noise ratio (OCNR) of more than 50 dB, is experimentally demonstrated. In addition, the wavelength tunability of the scheme, over 30 nm within the C band, is shown. Finally, the degree of phase correlation between comb lines is verified through RF beat tone linewidth measurements. The results show a five orders of magnitude reduction in the beat tone linewidth, due to FWM in an SOA.
ABSTRACT
We provide numerical verification of a feed-forward, heterodyne-based phase noise reduction scheme using single-sideband modulation that obviates the need for optical filtering at the output. The main benefit of a feed-forward heterodyne linewidth reduction scheme is the simultaneous reduction of the linewidth of all modes of a mode-locked laser (MLL) to that of a narrow-linewidth single-wavelength laser. At the heart of our simulator is an MLL model of reduced complexity. Importantly, the main issue being treated is the jitter of MLLs and we show how to create numerical waveforms that mimic the random-walk nature of timing jitter of pulses from MLLs. Thus, the model does not need to solve stochastic differential equations that describe the MLL dynamics, and the model calculates self-consistently the line-broadening of the modes of the MLL and shows good agreement with both the optical linewidth and jitter. The linewidth broadening of the MLL modes are calculated after the phase noise reduction scheme and we confirm that the phase noise contribution from the timing jitter still remains. Finally, we use the MLL model and phase noise reduction simulator within an optical communications system simulator and show that the phase noise reduction technique could enable MLLs as optical carriers for higher-order modulation formats, such as 16-state and 64-state quadrature amplitude modulation.
ABSTRACT
We study the dynamics of chaos in a dual-port erbium-doped fiber ring laser (EDFRL). The laser consists of two erbium-doped fibers, intracavity filters at 1549.32 nm, isolators, and couplers. At both ports, the laser transitions into the chaotic regime for pump currents greater than 100 mA via the period doubling route. We calculate the largest Lyapunov exponent using Rosenstein's algorithm. We obtain positive values for the largest Lyapunov exponent (≈0.2) for embedding dimensions 5, 7, 9, and 11 indicating chaos. We compute the power spectral density of the photocurrents at the output ports of the laser. We observe a bandwidth of 12.5 GHz at both ports. This ultra-wideband nature of chaos obtained has potential applications in high-speed random number generation and communication.
ABSTRACT
The optical outputs of single-section quantum-dash and quantum-dot mode-locked lasers (MLLs) are well known to exhibit strong group velocity dispersion. Based on careful measurements of the spectral phase of the pulses from these MLLs, we confirm that the difference in group delay between the modes at either end of the MLL spectrum equals the cavity round-trip time. This observation allows us to deduce an empirical formula relating the accumulated dispersion of the output pulse to the spectral extent and free-spectral range of the MLL. We find excellent agreement with previously reported dispersion measurements of both quantum-dash and quantum-dot MLLs over a wide range of operating conditions.
ABSTRACT
We report, to the best of our knowledge, the first demonstration of 320 Gb/s all-optical clock recovery and all-optical time de-multiplexing after 51 km transmission by exploiting single-quantum dash mode-locked laser diode (QD-MLLD). Based on injection locking of the QD-MLLD, the 40 GHz synchronized optical clock pulses were recovered from the 320 Gb/s with a pulse width of 1.9 ps and timing jitter of 135 fs, which allowed directly time de-multiplexing of 320-40 Gb/s without additional complex optoelectronic circuitry. The 320-40 Gb/s all-optical de-multiplexing was achieved with averaging a power penalty of 4.5 dB at BER of 1E-6.
ABSTRACT
Photonic band gap and transmission characteristics of 2D metallic photonic crystals at THz frequencies have been investigated using finite element method (FEM). Photonic crystals composed of metallic rods in air, in square and triangular lattice arrangements, are considered for transverse electric and transverse magnetic polarizations. The modes and band gap characteristics of metallic photonic crystal structure are investigated by solving the eigenvalue problem over a unit cell of the lattice using periodic boundary conditions. A photonic band gap diagram of dielectric photonic crystal in square lattice array is also considered and compared with well-known plane wave expansion results verifying our FEM approach. The photonic band gap designs for both dielectric and metallic photonic crystals are consistent with previous studies obtained by different methods. Perfect match is obtained between photonic band gap diagrams and transmission spectra of corresponding lattice structure.
ABSTRACT
The consequences of tailoring the longitudinal carrier density along the active layer of a multi-contact bulk semiconductor optical amplifier (SOA) are investigated using a rate equation model. It is shown that both the noise figure and output power saturation can be optimized for a fixed total injected bias current. The simulation results are validated by comparison with experiment using a multi-contact SOA. The inter-contact resistance is increased using a focused ion beam in order to optimize the carrier density control. A chip noise figure of 3.8 dB and a saturation output power of 9 dBm are measured experimentally for a total bias current of 150 mA.
Subject(s)
Amplifiers, Electronic , Computer-Aided Design , Optical Devices , Semiconductors , Computer Simulation , Energy Transfer , Equipment Design , Equipment Failure Analysis , Models, Theoretical , Signal-To-Noise RatioABSTRACT
Linewidth narrowing of the radio frequency beat-tones and the optical-modes is experimentally investigated in a â¼40 GHz quantum-dash mode-locked laser diode subject to optical injection of 10 GHz pulses. In comparison to the 75 kHz linewidth exhibited by the beat-tones in passive mode-locking conditions, a remarkable reduction to less than 8 Hz is achieved when the laser is under optical injection. From this beat-tone signal, an integrated root-mean-square timing jitter of 64 fs is calculated. In addition, a quadratic profile of the optical linewidth with the wavelength is observed in active locking, reaching a minimum of 1.7 MHz for the longitudinal modes around 1530 nm and progressively increasing to 37.4 MHz for modes at 1525 nm.
ABSTRACT
We present an experimental investigation of a multicontact semiconductor optical amplifier. This first-generation device allows for direct control of the carrier density profile along the length of the waveguide. This is used to control the device noise figure, with a minimum value of 5 dB observed at a gain of 15 dB for an optimum carrier density profile. The opposite carrier density profile results in an increase of the power saturation by 3 dB.
ABSTRACT
Synchronization of a 40 GHz quantum-dash mode-locked (ML) Fabry-Perot laser diode with optically injected pulse streams is experimentally studied. Injected signals consist of nonmodulated and modulated trains of 1.6 ps pulses at various repetition rates, ranging from 10 to 160 GHz and 10 to 160 Gbps, respectively. Subharmonic, fundamental, and harmonic synchronization of the ML laser allows retrieval of stable 40 GHz clock pulses featuring a width of 1.8 ps. Frequency components at 10 and 20 GHz do not create any amplitude modulation on the recovered 40 GHz clock pulses when injecting signals at 10 and 20 GHz/Gbps. In addition, external synchronization of the laser with pulse streams at 80 and 160 GHz/Gbps is sustained despite the absence of significant components at or below 40 GHz.
ABSTRACT
Timing-jitter measurements in optically generated subpicosecond pulses by a quantum-dash passively mode-locked semiconductor laser as a function of the bias current are reported. All the measurements are retrieved from a second-harmonic-generation frequency-resolved optical gating system. A decreasing trend in the pulse width and the associated timing jitter is found with the bias current. Additionally, the optical and mode-beating linewidths are analyzed in terms of both the mode wavelength and the bias current. From our results, we can conclude that once the optical modes are phase locked, the optical linewidth associated to every individual longitudinal mode of the device under test does not have a significant impact on the mode-beating signal on neither the pulse width nor its respective timing jitter.
ABSTRACT
Optical pulses at a repetition rate of 39.8 GHz have been observed in a dc-biased passively mode-locked quantum-dash Fabry-Pérot laser diode. The pulses generated by this diode are studied in the temporal and spectral domains using a second harmonic generation frequency-resolved optical gating system. By using a tunable band-pass filter, it is observed that the pulse width decreases as the number of lasing modes selected by the filter increases. Furthermore, by controlling the phase difference of the modes using a 450 m-long single mode fibre, a passive compression of the pulses is obtained. A minimum pulse width of 720 fs has been measured with this type of mode-locked Fabry-Pérot laser.
ABSTRACT
We investigate the power and the polarization dependence of the intraband dynamics in a bulk semiconductor optical amplifier using both a 2.5-ps pump-probe experimental set-up in contra-propagation and a theoretical model. Our model is based on the rate equations and takes into account the polarization dependence of the gain. By comparing experimental and computational results we are able to highlight the dependences of the intraband dynamics and to extract the non-linear gain compression factor as a function of both pulse energy and polarization of the injected pulses.
