Effect of ultra-high-density polyethylene microplastic on the sorption and biodegradation of organic micropollutants.

Microplastics and organic micropollutants are two emerging contaminants that interact with each other in environmental and engineered systems. Sorption of organic micropollutants, such as pharmaceuticals, pesticides and industrial compounds, to microplastics can modify their bioavailability and biodegradation. The present study investigated the capacity of ultra-high density polyethylene particles (125 µm in diameter), before and after aging, to sorb 21 organic micropollutants at different environmentally relevant concentration. Furthermore, the biodegradation of these organic micropollutants by a biofilm microbial community growing on the microplastic surface was compared with the biodegradation by a microbial community originating from activated sludge. Among all tested organic micropollutants, propranolol (70%), trimethoprim (25%) and sotalol (15%) were sorbed in the presence of polyethylene particles. Growth of a biofilm on the polyethylene particles had a beneficial effect on the sorption of bromoxynil, caffeine and chloridazon and on the biodegradation of irbesartan, atenolol and benzotriazole. On the other hand, the biofilm limited the sorption of trimethoprim, propranolol, sotalol and benzotriazole and the biodegradation of 2,4-D. These results showed that ultra-high density polyethylene particles can affect both in a positive and negative way for the abiotic and biotic removal of organic micropollutants in wastewater. This project highlights the need for further investigation regarding the interaction between microplastics and organic micropollutants in the aquatic environment.

Effects of salinity on the treatment of synthetic petroleum-industry wastewater in pilot vertical flow constructed wetlands under simulated hot arid climatic conditions.

Petroleum-industry wastewater (PI-WW) is a potential source of water that can be reused in areas suffering from water stress. This water contains various fractions that need to be removed before reuse, such as light hydrocarbons, heavy metals and conditioning chemicals. Constructed wetlands (CWs) can remove these fractions, but the range of PI-WW salinities that can be treated in CWs and the influence of an increasing salinity on the CW removal efficiency for abovementioned fractions is unknown. Therefore, the impact of an increasing salinity on the removal of conditioning chemicals benzotriazole, aromatic hydrocarbon benzoic acid, and heavy metal zinc in lab-scale unplanted and Phragmites australis and Typha latifolia planted vertical-flow CWs was tested in the present study. P. australis was less sensitive than T. latifolia to increasing salinities and survived with a NaCl concentration of 12 g/L. The decay of T. latifolia was accompanied by a decrease in the removal efficiency for benzotriazole and benzoic acid, indicating that living vegetation enhanced the removal of these chemicals. Increased salinities resulted in the leaching of zinc from the planted CWs, probably as a result of active plant defence mechanisms against salt shocks that solubilized zinc. Plant growth also resulted in substantial evapotranspiration, leading to an increased salinity of the CW treated effluent. A too high salinity limits the reuse of the CW treated water. Therefore, CW treatment should be followed by desalination technologies to obtain salinities suitable for reuse. In this technology train, CWs enhance the efficiency of physicochemical desalination technologies by removing organics that induce membrane fouling. Hence, P. australis planted CWs are a suitable option for the treatment of water with a salinity below 12 g/L before further treatment or direct reuse in water scarce areas worldwide, where CWs may also boost the local biodiversity. Graphical abstract.

Improving removal of antibiotics in constructed wetland treatment systems based on key design and operational parameters: A review.

While removal of antibiotics in constructed wetland treatment systems (CWTS) has been described previously, few studies examined the synergistic effect of multiple design and operational parameters for improving antibiotic removal. This review describes the removal of 35 widely used antibiotics in CWTS covering the most common design parameters (flow configuration, substrate, plants) and operational parameters (hydraulic retention time/hydraulic loading rates, feeding mode, aeration, influent quality), and discusses how to tailor those parameters for improving antibiotic removal based on complex removal mechanisms. To achieve an overall efficient removal of antibiotics in CWTS, our principal component analysis indicated that optimization of flow configuration, selection of plant species, and compensation for low microbial activity at low temperature is the priority strategy. For instance, a hybrid-CWTS that integrates the advantages of horizontal and vertical subsurface flow CWTS may provide a sufficient removal performance at reasonable cost and footprint. To target removal of specific antibiotics, future research should focus on elucidating key mechanisms for their removal to guide optimization of the design and operational parameters. More efficient experimental designs (e.g., the Box-Behnken design) are recommended to determine the settings of the key parameters. These improvements would promote development of this environmentally friendly and cost-efficient technology for antibiotic removal.

Pilot-scale hybrid constructed wetlands for the treatment of cooling tower water prior to its desalination and reuse.

Cooling towers are responsible for a large part of the industrial fresh water withdrawal, and the reuse of cooling tower water (CTW) effluents can strongly lower industrial fresh water footprints. CTW requires desalination prior to being reused, but various CTW components, such as total organic carbon (TOC), conditioning chemicals and total suspended solids (TSS) hamper physico-chemical desalination technologies and need to be removed from the CTW. A cost-efficient and robust pre-treatment is thus required, which can be provided by constructed wetlands (CWs). The present study is the first study that determined the CTW pre-treatment efficiency of hybrid-CWs and the impact of winter season and biocides in the CTW on the pre-treatment efficiency. The most efficient CW flow type and dominant removal mechanisms for CW components hampering physico-chemical desalination were determined. Subsurface flow CWs removed PO43-, TSS and TOC as a result of adsorption and filtration. Vertical subsurface flow CWs (VSSF-CW) excelled in the removal of benzotriazole as a result of aerobic biodegradation. Horizontal subsurface flow CWs (HSSF-CW) allowed the denitrification of NO3- due to their anaerobic conditions. Open water CWs (OW-CWs) did not contribute to the removal of components that hamper physico-chemical desalination technologies, but do provide water storage options and habitat. The biological removal processes in the different CW flow types were negatively impacted by the winter season, but were not impacted by concentrations of the biocides glutaraldehyde and DBNPA that are relevant in practice. For optimal pre-treatment, a hybrid-CW, consisting of an initial VSSF-CW followed by an OW-CW and HSSF-CW is recommended. Future research should focus on integrating the hybrid-CW with a desalination technology, e.g. reverse osmosis, electrodialysis or capacitive ionization, to produce water that meets the requirements for use as cooling water and allow the reuse of CTW in the cooling tower itself.

Anaerobic biodegradation of pharmaceutical compounds coupled to dissimilatory manganese (IV) or iron (III) reduction.

Pharmaceuticals in water have adverse effects on aquatic environment. Anaerobic pharmaceutical biodegradation coupled to dissimilatory manganese(Mn) (IV)- or iron(Fe) (III)-oxides reduction is potentially efficient but unexplored. In this study, batch experiments were performed using different Mn(IV) and Fe(III) species with a microbial inoculum pre-cultivated with 15 mM chemically-synthesized Mn(IV) and 10 mg L-1 metoprolol. Results show 26% caffeine and 52% naproxen are degraded with Mn(IV) as terminal electron acceptor and insignificant biodegradation for other pharmaceuticals tested. Reduction of Mn(IV) from drinking water treatment is coupled to anaerobic biodegradation of metoprolol and propranolol, resulting in removal efficiencies of 96% and 31%, respectively. The results indicate that adsorption contributes to the pharmaceutical removal during the first 10 days of incubation, while biodegradation is the main removal mechanism in the whole period. Fe(III) can also be used as electron acceptor in anaerobic pharmaceutical biodegradation. Over half of the added metoprolol is degraded with both chemically-synthesized Fe(III) and Fe(III)-citrate as terminal electron acceptors. However, this process did not occur when using Fe(III) from drinking water treatment or Fe(III)-based sorbents. This study indicates that anaerobic pharmaceutical biodegradation coupled to dissimilatory Mn(IV) or Fe(III) reduction is possible, and promising for application to cleaning wastewater treatment plant effluents.

Benzotriazole removal mechanisms in pilot-scale constructed wetlands treating cooling tower water.

The reuse of discharged cooling tower water (CTW) in the cooling tower itself could reduce fresh water intake and help mitigating fresh water scarcity problems. However, this requires desalination prior to its reuse, and hindering fractions, such as conditioning chemicals, should be removed before desalination to obtain a higher desalination efficiency. Constructed wetlands (CWs) can provide such a pre-treatment. In this study, the mechanisms underlying the removal of conditioning chemical benzotriazole (BTA) in CWs was studied using an innovative approach of differently designed pilot-scale CWs combined with batch removal experiments with substrate from these CWs. By performing these combined experiments, it was possible to determine the optimal CW design for BTA removal and the most relevant BTA removal processes in CWs. Adsorption yielded the highest contribution, and the difference in removal between different CW types was linked to their capability to aerobically biodegrade BTA. This knowledge on the main removal mechanisms for BTA allows for a CW design tailored for BTA removal. In addition, the outcomes of this research show that performing batch experiments with CW substrate allows one to determine the relevant removal mechanisms for a given compound which results in a better understanding of CW removal processes.

Retention soil filters for the treatment of sewage treatment plant effluent and combined sewer overflow.

Retention soil filters (RSFs) are vertical flow constructed wetlands. They are mainly used for the treatment of combined sewer overflow or stormwater, and not operated during dry weather conditions. However, RSFs have been successfully tested as continuous post treatment for sewage treatment plant effluents. In this paper we present a new approach, namely dual usage of the retention soil filter. During dry weather the RSF is used for the polishing treatment of sewage treatment plant effluent and during overflow events, the retention soil filter treats the combined sewer overflow. This study was conducted at two pilot RSFs that were fed with sewage treatment effluent for four years. Removal of TOC, DOC, nutrients and 21 organic micropollutants was determined during six months at different sequences of regular effluent and overflow treatment conditions. TOC, DOC and nutrients, appearing in high concentration in combined sewer overflow, were effectively removed, and metformin and caffeine micropollutants showed >99% removal. Residues from this combined sewer treatment that were sorbed on filter material or stored in pore water were washed out directly after treatment when STP effluent infiltration was initiated. This effect declined within 20 h after combined sewer overflow treatment. Dry periods of 18 h between combined sewer and sewage treatment plant effluent feeding counteracted the wash out effects. The highest removal efficiency was found in the beginning of the feeding time of 28 h, indicating that shorter feeding cycles enhance the overall efficiency of the RSF. Finally, the results show that a single RSF system can successfully reduce emissions of TOC, DOC, nutrients and micropollutants to surface waters from two different emission pathways, i.e. from regular treated effluents and storm related sewer overflows. In conclusion, the dual usage of RSF is a promising approach and ready for upscaling and implementation.

Non-target screening reveals the mechanisms responsible for the antagonistic inhibiting effect of the biocides DBNPA and glutaraldehyde on benzoic acid biodegradation.

The desalination and reuse of discharged cooling tower water (CTW) as feed water for the cooling tower could lower the industrial fresh water withdrawal. A potential pre-treatment method before CTW desalination is the use of constructed wetlands (CWs). Biodegradation is an important removal mechanism in CWs. In the present study, the impact of the biocides 2,2-dibromo-2-cyanoacetamide (DBNPA) and glutaraldehyde on the biodegradation process by CW microorganisms was quantified in batch experiments in which benzoic acid was incubated with realistic CTW biocide concentrations. DBNPA had a stronger negative impact on the biodegradation than glutaraldehyde. The combination of DBNPA and glutaraldehyde had a lower impact on the biodegradation than DBNPA alone. UHPLC-qTOF-MS/MS non-target screening combined with data-analysis script 'patRoon' revealed two mechanisms behind this low impact. Firstly, the presence of glutaraldehyde resulted in increased DBNPA transformation to the less toxic transformation product 2-bromo-2-cyanoacetamide (MBNPA) and newly discovered 2,2-dibromopropanediamide. Secondly, the interaction between glutaraldehyde and DBNPA resulted in the formation of new products that were less toxic than DBNPA. The environmental fate and toxicity of these products are still unknown. Nevertheless, their formation can have important implications for the simultaneous use of the biocides DBNPA and glutaraldehyde for a wide array of applications.

Diffusion of hydrophilic organic micropollutants in granular activated carbon with different pore sizes.

Hydrophilic organic micropollutants are commonly detected in source water used for drinking water production. Effective technologies to remove these micropollutants from water include adsorption onto granular activated carbon in fixed-bed filters. The rate-determining step in adsorption using activated carbon is usually the adsorbate diffusion inside the porous adsorbent. The presence of mesopores can facilitate diffusion, resulting in higher adsorption rates. We used two different types of granular activated carbon, with and without mesopores, to study the adsorption rate of hydrophilic micropollutants. Furthermore, equilibrium studies were performed to determine the affinity of the selected micropollutants for the activated carbons. A pore diffusion model was applied to the kinetic data to obtain pore diffusion coefficients. We observed that the adsorption rate is influenced by the molecular size of the micropollutant as well as the granular activated carbon pore size.

In situ removal of four organic micropollutants in a small river determined by monitoring and modelling.

Organic micropollutants (OMPs) are widely detected in surface waters. So far, the removal processes of these compounds in situ in river systems are not yet totally revealed. In this study, a combined monitoring and modelling approach was applied to determine the behaviour of 1-H benzotriazole, carbamazepine, diclofenac and galaxolide in a small river system. Sewage treatment plant effluents and the receiving waters of the river Swist were monitored in 9 dry weather sampling campaigns (precipitation < 1 mm on the sampling day itself and <5 mm total precipitation two days before the sampling) during different seasons over a period of 3 years. With the results gained through monitoring, mass balances have been calculated to assess fate in the river. With the DWA Water Quality Model, OMP concentrations in the river were successfully simulated with OMP characteristics gained through literature studies. No removal was determined for 1-H benzotriazole and carbamazepine, whereas diclofenac showed removal that coincided with light intensity. Moreover, modelling based on light sensitivity of diclofenac also suggested relevant degradation at natural light conditions. These two approaches suggest removal by photodegradation. The highest removal in the river was detected for galaxolide, presumably due to volatilisation, sorption and biodegradation. Furthermore, short-term concentration variability in the river was determined, showing that daily concentration patterns are influenced by dynamics of sewage treatment plant effluent volumes and removal processes in the river.

Fate and distribution of pharmaceutically active compounds in mesocosm constructed wetlands.

Removal of pharmaceutically active compounds (PhACs) in constructed wetlands (CWs) is a complex interplay of different processes. We studied fate and distribution of seven PhACs (caffeine, CAF; naproxen, NAP; metoprolol, MET; propranolol, PRO; ibuprofen, IBP; carbamazepine, CBZ; diclofenac, DFC) in mesocosm CWs and effects of irradiation via pre-photocatalysis, substrate composition (mainly sediment) through addition of litter (dead plant biomass), and plants. CWs showed high removal of CAF, NAP, MET, PRO, and IBP (79-99%). All seven PhACs were detected in substrate and plant tissues as well as IBP intermediates. Estimated PhAC mass balance showed that sorption dominated PRO removal in CWs while other PhACs were mainly removed by biodegradation and/or phytodegradation. Pre-photocatalysis significantly increased removal of PhACs except for CAF and IBP, and decreased accumulation of PhACs in substrate and plant tissues of the following wetland compartment. Litter addition in CW significantly enhanced removal of PRO and CBZ via biodegradation and/or phytodegradation. Plants played an essential and positive role in removing PhACs, resulting from direct phytoremediation and indirectly enhancing sorption and biodegradation. Our study provides knowledge to understand removal mechanisms of PhACs in CWs and to potentially enhance PhAC removal by developing pre-photocatalysis, adding dead plant biomass, and optimizing vegetation.

Biological regeneration of manganese (IV) and iron (III) for anaerobic metal oxide-mediated removal of pharmaceuticals from water.

Applying manganese(IV)- or iron(III)-(hydr)oxides to remove pharmaceuticals from water could be attractive, due to the capacity of these metal oxides to remove pharmaceuticals and be regenerated. As pharmaceutical removal under anaerobic conditions is foreseen, Mn(IV) or Fe(III) regeneration under anaerobic conditions, or with minimum oxygen dosage, is preferred. In this study, batch experiments are performed to investigate (1) Mn(IV) and Fe(III) regeneration from Mn(II) and Fe(II); (2) the pharmaceutical removal during biological Mn(IV) and Fe(III) regeneration; and (3) anaerobic abiotic pharmaceutical removal with different Mn(IV) or Fe(III) species. Results show that biological re-oxidation of reduced Mn(II) to Mn(IV) occurs under oxygen-limiting conditions. Biological re-oxidation of Fe(II) to Fe(III) is obtained with nitrate under anaerobic conditions. Both bio-regenerated Mn(IV)-oxides and Fe(III)-hydroxides are amorphous. The pharmaceutical removal is insignificant by Mn(II)- or Fe(II)-oxidizing bacteria during regeneration. Finally, pharmaceutical removal is investigated with various Mn(IV) and Fe(III) sources. Anaerobic abiotic removal using Mn(IV) produced from drinking water treatment plants results in 23% metoprolol and 44% propranolol removal, similar to chemically synthesized Mn(IV). In contrast, Fe(III) from drinking water treatment plants outperformed chemically or biologically synthesized Fe(III); Fe (III) from drinking water treatment can remove 31-43% of propranolol via anaerobic abiotic process. In addition, one of the Fe(III)-based sorbents tested, FerroSorp®RW, can also remove propranolol (20-25%). Biological regeneration of Mn(IV) and Fe(III) from the reduced species Mn(II) and Fe(II) could be more effective in terms of cost and treatment efficiency.

Retention soil filter as post-treatment step to remove micropollutants from sewage treatment plant effluent.

Retention soil filters (RSFs) are a specific form of vertical flow constructed wetlands for the treatment of rain water and/or wastewater. We have tested 3 pilot RSFs to investigate removal of dissolved organic carbon (DOC) and 14 different organic micropollutants (OMPs) from the effluent of a large scale sewage treatment plant (STP). Two of them were operated as conventional RSF with material (sand with CaCO3 and organic matter) from two different full-scale RSFs. The third pilot RSF contained filter material (sand with CaCO3) with additional biochar in the upper layer (0-10 cm) and granulated activated carbon (GAC) in the lower layer (60-90 cm). The filters were planted with Phragmites australis. The RSFs were operated and monitored for 3 years, and water samples were taken regularly at inflow, outflows and in 3 depths within the filters. In total 523 samples were taken. In the conventional RSF, best median removal was detected for galaxolide, diclofenac 4-hydroxy, metoprolol and clarithromycin (75-79%). No removal was seen for sulfamethoxazole and carbamazepine. The DOC and OMP removal in the conventional RSFs was best in the upper layer with highest organic matter content, increased in time over the three years of operation and also with extended contact time. In the effluent of the RSF with GAC, 10 out of the 14 OMPs could not be detected; 4 OMPs were detected, but only metformin with removal < 80%, thus showing a more efficient removal than the conventional RSF. A decrease in DOC removal was detected in the GAC layer (>88% to 60%) over the 2.5 years of operation. Biochar was most effective in OMP removal in the first operational year. It can be concluded that the increasing removal efficiency of the conventional RSF material - also present in the RSF with biochar and GAC - might mitigate the reduced efficiency of the sorbent additives biochar and GAC. This enables to extend the operational lifetime of the filters with acceptable removal rates. Finally, our study demonstrates that an RSF with GAC shows an enhanced removal of OMPs, which is a suitable post-treatment step for STPs.

Evaluation of attenuation of pharmaceuticals, toxic potency, and antibiotic resistance genes in constructed wetlands treating wastewater effluents.

The performance of constructed wetlands (CWs) in the removal of pharmaceutically active compounds (PhACs) is generally evaluated on the basis of chemical analysis. In this work, we used a combination of chemical, toxicological, and molecular analyses to assess the attenuation of PhACs, toxic potency and antibiotic resistance genes (ARGs) in a field study of three CWs serving as tertiary treatment of wastewater treatment plants. First, 17 PhACs were analysed chemically, of which 14 were detected and seven at concentrations >0.1µg/l. Even though some of the individual PhACs were moderately or highly removed in the CWs investigated, median removal of overall PhACs was approximately 50% in the vertical subsurface flow CW (VSF-CW) with a lower hydraulic loading rate while the removal in the other two free water surface flow CWs (SF-CWs) was negligible. Second, toxic potency of wastewater extracts was assessed in a range of bioassays. Estrogenicity was overall attenuated in CWs, while the neurotoxic potency of wastewater extracts did not decrease after passage through the two CWs investigated. Third, the VSF-CW and one of the SF-CW showed a positive removal of an integrase gene and three ARGs tested. The increased concentrations of ARGs in the other SF-CW, as well as the increase of total bacteria in all CWs, may relate to regrowth of resistance-carrying bacteria. Finally, multivariate analysis shows that most PhACs are positively correlated to the observed toxic potency. Additionally, low removal of organics and nutrients seems to parallel with low removal of PhACs. ARGs positively correlated with organics, nutrients and some PhACs, and the integrase gene but not to the respective antibiotics. The insufficient removal of PhACs, toxic potency, and ARGs indicates the need of an optimal design of CWs as tertiary treatment facilities.

Effects of dissolved organic matter and nitrification on biodegradation of pharmaceuticals in aerobic enrichment cultures.

Natural dissolved organic matter (DOM) and nitrification can play an important role in biodegradation of pharmaceutically active compounds (PhACs) in aerobic zones of constructed wetlands (CWs). This study used an enrichment culture originating from CW sediment to study the effect of DOM and nitrification on aerobic biodegradation of seven PhACs. The enriched culture degraded caffeine (CAF), metoprolol (MET), naproxen (NAP), and ibuprofen (IBP) with a consistent biodegradability order of CAF>MET>NAP>IBP. Biodegradation of propranolol, carbamazepine, and diclofenac was insignificant (<15%). CAF biodegradation was inhibited by the easily biodegradable DOM. Conversely, DOM enhanced biodegradation of MET, NAP, and IBP, potentially by contributing more biomass capable of degrading PhACs. Nitrification enhanced biodegradation of NAP and IBP and mineralization of the PhAC mixture as well as less biodegradable DOM, which may result from co-metabolism of ammonia oxidizing bacteria or enhanced heterotrophic microbial activity under nitrification. MET biodegradation was inhibited in the presence of nitrification. DOM and nitrification effects on PhAC biodegradation in CWs gained from this study can be used in strategies to improve CW operation, namely: designing hydraulic retention times based on the biodegradability order of specific PhACs; applying DOM amendment; and introducing consistent ammonium streams to increase removal of PhACs of interest.

Anoxic conditions are beneficial for abiotic diclofenac removal from water with manganese oxide (MnO2).

This is the first study examining pharmaceutical removal under anoxic conditions with MnO2. This study compares the abiotic removal of seven pharmaceuticals with reactive MnO2 particles in the presence of oxygen (oxic conditions) and in the absence of oxygen (anoxic conditions). Due to the novelty of pharmaceutical removal under anoxic conditions, the influence of phosphate buffer, pH, and MnO2 morphologies is also examined. Results show that over 90% of diclofenac is removed under anoxic conditions. Additionally, we found that (1) anoxic conditions are beneficial for diclofenac removal with MnO2, (2) phosphate buffer affects the pharmaceutical removal efficiencies, (3) higher pharmaceutical removal is obtained at acidic pH compared to that at neutral or alkaline conditions, and (4) amorphous MnO2 removes pharmaceuticals better than crystalline MnO2. The pharmaceutical molecular structure and properties, MnO2 properties especially reactive sites of the MnO2 surface, are important for degradation kinetics. This study provides a fundamental basis towards understanding pharmaceutical degradation with MnO2 under anoxic conditions, and development of a cost-effective, sustainable technology for removal of pharmaceuticals from water.

Marine snow increases the adverse effects of oil on benthic invertebrates.

After the Deepwater Horizon oil spill, a MOSSFA (Marine Oil Snow Sedimentation and Flocculent Accumulation) event took place, transporting an estimated 14% of total released oil to the sediment, and smothering parts of the benthic ecosystem. This microcosm study describes the effects of oiled artificial marine snow on benthic macroinvertebrates. Corophium volutator survival was reduced by 80% in oil-contaminated snow. Hydrobia ulvae survival was reduced by 40% in oil-contaminated snow, possibly due to consumption of oiled snow. Macoma balthica was sensitive to marine snow, addition of oil slightly decreased survival. This study reveals trait-dependent sensitivity to oil with or without marine snow. The main drivers for organismal response to marine snow and oil are motility, sensitivity to hypoxia and oil toxicity, and feeding habits. Adverse effects of MOSSFA events on benthos will have consequence for the benthic-pelagic habitat and food chain, and should receive more attention in oil spill management.

Anaerobic degradation of a mixture of MtBE, EtBE, TBA, and benzene under different redox conditions.

The increasing use of biobased fuels and fuel additives can potentially change the typical fuel-related contamination in soil and groundwater. Anaerobic biotransformation of the biofuel additive ethyl tert-butyl ether (EtBE), as well as of methyl tert-butyl ether (MtBE), benzene, and tert-butyl alcohol (TBA, a possible oxygenate metabolite), was studied at an industrially contaminated site and in the laboratory. Analysis of groundwater samples indicated that in the field MtBE was degraded, yielding TBA as major product. In batch microcosms, MtBE was degraded under different conditions: unamended control, with medium without added electron acceptors, or with ferrihydrite or sulfate (with or without medium) as electron acceptor, respectively. Degradation of EtBE was not observed under any of these conditions tested. TBA was partially depleted in parallel with MtBE. Results of microcosm experiments with MtBE substrate analogues, i.e., syringate, vanillate, or ferulate, were in line with the hypothesis that the observed TBA degradation is a cometabolic process. Microcosms with ferulate, syringate, isopropanol, or diethyl ether showed EtBE depletion up to 86.5% of the initial concentration after 83 days. Benzene was degraded in the unamended controls, with medium without added electron acceptors and with ferrihydrite, sulfate, or chlorate as electron acceptor, respectively. In the presence of nitrate, benzene was only degraded after addition of an anaerobic benzene-degrading community. Nitrate and chlorate hindered MtBE, EtBE, and TBA degradation.

Pharmaceutical biodegradation under three anaerobic redox conditions evaluated by chemical and toxicological analyses.

Biodegradation of pharmaceutically active compounds (PhACs) in the subsurface layer of constructed wetlands (CWs) under various anaerobic redox conditions is rarely studied. In this study, CW sediment microbial populations were enriched for PhAC biodegrading organisms. Biodegradation effectivity of a mixture of six PhACs (caffeine, CAF; naproxen, NAP; metoprolol, MET; propranolol, PRO; ibuprofen, IBP; carbamazepine, CBZ) and single compounds (CAF, NAP) was investigated under nitrate reducing, sulfate reducing, and methanogenic conditions using chemical and toxicological analyses. Biodegradation efficiencies varied strongly among the six PhACs and three redox conditions chosen. CAF and NAP were completely biodegraded under sulfate reducing and methanogenic conditions whereas biodegradation efficiencies of the other PhACs were much less (MET, PRO <20%; IBP, CBZ, negligible). CAF and NAP showed significantly lower biodegradation under nitrate reducing conditions than under the other two redox conditions. No difference was found in biodegradation efficiencies of CAF and NAP when present as single compound, or as a mixture with other PhACs. Different intermediates were observed, indicating different biodegradation pathways under different redox conditions and when the PhACs were present as single compound or in a mixture. From toxicological perspective, toxicity of PhACs and/or their intermediates to Vibrio fischeri was attenuated during the biodegradation process. Chemical and toxicological data showed positive correlations in principle component analysis, by which potentially toxic PhACs and intermediates are indicated for further ecotoxicological hazard assessment.

Oil biodegradation: Interactions of artificial marine snow, clay particles, oil and Corexit.

During the Deepwater Horizon (DwH) oil spill, interactions between oil, clay particles and marine snow lead to the formation of aggregates. Interactions between these components play an important, but yet not well understood, role in biodegradation of oil in the ocean water. The aim of this study is to explore the effect of these interactions on biodegradation of oil in the water. Laboratory experiments were performed, analyzing respiration and n-alkane and BTEX biodegradation in multiple conditions containing Corexit, alginate particles as marine snow, and kaolin clay. Two oil degrading bacterial pure cultures were added, Pseudomonas putida F1 and Rhodococcus qingshengii TUHH-12. Results show that the presence of alginate particles enhances oil biodegradation. The presence of Corexit alone or in combination with alginate particles and/or kaolin clay, hampers oil biodegradation. Kaolin clay and Corexit have a synergistic effect in increasing BTEX concentrations in the water and cause delay in oil biodegradation.