In vivo biocompatibility of a new cyanine dye for ILM peeling.

PURPOSE: To investigate the biocompatibility of the new cyanine dye: 3,3'-Di-(4-sulfobutyl)-1,1,1',1'-tetramethyl-di-1H-benz[e]indocarbocyanine (DSS) as a vital dye for intraocular application in an in vivo rat model and to evaluate the effects of this dye on retinal structure and function. METHODS: DSS at a concentration of 0.5% was applied via intravitreal injections to adult Brown Norway rats with BSS serving as a control. Retinal toxicity was assessed 7 days later by means of retinal ganglion cell (RGC) counts, light microscopy, optical coherence tomography (OCT), and electroretinography (ERG). RESULTS: No significant decrease in RGC numbers was observed. No structural changes of the central retina were observed either in vivo (OCT) or under light microscopy. ERGs detected a temporary reduction of retinal function 7 days after injection; this was no longer evident 14 days after injection. CONCLUSIONS: DSS showed good biocompatibility in a well-established experimental in vivo setting and may be usable for intraocular surgery as an alternative to other cyanine dyes. In contrast to indocyanine green, it additionally offers fluorescence in the visual spectrum. Further studies with other animal models are needed before translation into clinical application.

Noise-induced Förster resonant energy transfer between orthogonal dipoles in photoexcited molecules.

We show that Förster resonance energy transfer (FRET) in an orthogonally arranged donor-acceptor pair can be induced by environmental noise, although direct transfer is prohibited. Environmental fluctuations break the strict orthogonal dipole arrangement and cause effective fluctuating excitonic interactions. Using a scaling argument, we show that interaction fluctuations are coupled to those of the energy levels and are strong enough to induce large FRET rates. This mechanism also explains the temperature dependence observed in a recent experiment on a perylene bisimide dyad and predicts a modified distance dependence as compared to standard Förster theory.

[Chemical and spectroscopic aspects of the application of dyes in vitreoretinal surgery]. / Chemische und spektroskopische Aspekte der Verwendung von Farbstoffen in der vitreoretinalen Chirurgie.

The advantages of the use of optical contrast agents in surgery, such as vitreoretinal microsurgery, are presented. Requirements concerning these materials and the potentials and limitations of their application are discussed on the basis of their coloristic properties. Applications of fluorescent dyes are examined.

Staining and peeling of the internal limiting membrane using a fluorescent dye (Rhodamine 6 G).

AIM: To assess whether low concentrations of a fluorescent dye such as Rhodamine 6G would help the unaided human eye visualise the vitreous and the internal limiting membrane (ILM) under standard halogen illumination. MATERIAL/METHODS: The UV/Vis absorption (E) and fluorescence (I) spectra of Rhodamine 6G in water were measured and compared with Indocyanine Green (ICG). Surgery was performed in two rhesus monkeys and consisted of standard pars plana vitrectomy with halogen light source used for illumination. Rhodamine 6G was diluted in balanced salt solution (BSS). A few drops of the dye in a concentration of 0.1% (307 mOsm) were applied over the posterior pole in the air-filled globe and washed out by irrigation after 1 min. Immediately after surgery, the globes were enucleated, fixated and prepared for histological evaluation. RESULTS: In contrast to ICG, both the maximum of the absorption and emission of Rhodamin 6G are very much within the spectral sensitivity of the human eye. The Rhodamine 6G-BSS itself appears red in colour. Using a dye concentration of 0.1%, there was no visible red-staining of the ILM as such. As the dye was irrigated out with BSS, a marked green fluorescence of the fluid within the vitreous cavity was noted. With halogen illumination through a standard 20-gauge light pipe, the dye provided a sufficient green fluorescence to identify and safely remove the ILM and to clearly differentiate areas of peeled from non-peeled ILM. During light microscopy, eyes revealed a peeled ILM demarcation with no signs of acute retinal toxicity. CONCLUSION: The findings indicate that a fluorescent dye can be used for ILM peeling. Assuming that the fluorophore provides a high enough fluorescence quantum yield after adsorption to the ILM, much lower dye concentrations could be used compared with absorbent dyes, thereby minimising toxic effects.

A re-examination of the line shape of the electronic spectra of complex molecules in solution: log-normal function versus gaussian.

The log-normal function and the Gauss function have been tested for the description of highly structured UV/Vis spectra of complex molecules in solution. The Gauss function was shown to give the better fit for these spectra and is also useful for fluorescence spectra. These results were further supported by the application of the Ross function.

Using N-aminoperylene-3,4:9,10-tetracarboxylbisimide as a fluorogenic reactand in the optical sensing of aqueous propionaldehyde

Aldehydes are usually determined via chemical derivatization using a chromogenic and fluorogenic reagent followed by chromatographic separation and UV-visible detection. As a consequence, continuous on-line monitoring is impossible. Following our concept of reversible chemical reactions as the basis of optical sensors, we have investigated N-amino-N'-(1-hexylheptyl)perylene-3,4:9,10-tetracarboxylbisimide for aldehyde sensing. The fluorogenic reactand has been embedded in plasticized PVC, and the resulting thin layers have been exposed to aqueous samples of aliphatic aldehydes and ketones. The reactand exhibits a pronounced increase in fluorescence upon interaction with aldehydes since the chemical reaction causes a dequenching of perylene fluorescence. Upon interaction with aqueous propionaldehyde, sensor layers typically exhibit a dynamic range from 5 to 100 mM propionaldehyde, and the limit of detection amounts to 0.08 mM. The forward and reverse response time (t95) for a decade change in activity is in the range of 2-7 min, when measured at pH 2.5. The selectivity of sensor layers toward aldehydes correlates with their lipophilicity in that aldehydes with higher lipophilicity are more efficiently extracted into the polymer layer.

Labelling of liposomes with intercalating perylene fluorescent dyes.

The high fluorescent potential and the exceptional photostability of lipophilic derivatives of perylene-3,4:9,10-bis(dicarboximides) are utilized for the fluorescence-labelling of liposomes. The preparation of the liposomes is effected by supersonic starting from a lipid mixture consisting of the matrix lipids soy lecithin, cholesterol, alpha-tocopherol and the perylene dyes. From a multitude of perylene derivatives investigated only those are optimally incorporated into the bilayer membrane of unilamellar liposomes which are substituted at both nitrogen atoms by one or two linear hydrocarbon groups. In order to attain an optimal fluorescent quantum yield, about 200 to 300 dye molecules can be incorporated per liposome. The liposomes thus obtained have a diameter of about 70 to 80 nm, are homogeneous and may be stored for more than seven months. Neither the fluorescent properties nor the stability of these liposomes are influenced by the additional incorporation of various ara C-derivatives and lipophilic anchor groups which subsequently enable the coupling of antibodies to the liposomes. As the water-insoluble perylene dyes are incorporated into the bilayer membrane, the aqueous inner volume of the liposomes remains available for a further utilization.

Comparative studies of the preparation of immunoliposomes with the use of two bifunctional coupling agents and investigation of in vitro immunoliposome-target cell binding by cytofluorometry and electron microscopy.

The two coupling agents SPDP (N-succinimidyl-3-(2-pyridyldithio)propionate) and SATA (N-succinimidyl-S-acetylthioacetate) were compared in their efficiency and feasibility to couple monoclonal antibodies (Abs) via thioether linkage to liposomes functionalized by various lipophilic maleimide compounds like N-(3-maleimidopropionyl)-N2-palmitoyl-L-lysine methyl ester (MP-PL), N-(3-maleimidopropionyl)phosphatidylethanolamide (MP-PE), N6-(6-maleimidocaproyl)-N2-palmitoyl-L-lysine methyl ester (EMC-PL), and N-(6-maleimidocaproyl)phosphatidylethanolamine (EMC-PE). The composition of the liposomes was soy phosphatidylcholine (SPC), cholesterol, maleimide compounds and alpha-tocopherol (1:0.2:0.02:0.01, mol parts), plus N4-oleylcytosine arabinoside (NOAC) as cytostatic prodrug (0.2 mol parts) and a new, lipophilic and highly fluorescent dye N,N'-bis(1-hexylhfetyl)-3,4:9,10-perylenebis(dicarboximid ) (BHPD, 0.006 mol parts). From the maleimide derivatives MP-PL was the most effective in terms of preservation of the coupling activity in dependence of liposome storage. The coupling of the monoclonal A B8-24.3 (mouse IgG2b, MHC class I, anti H-2kb) and IB16-6 (rat IgG2a, anti B16 mouse melanoma) to the drug carrying liposomes was more effective and easier to accomplish with SATA as compared to SPDP. Coupling rates of 60-65% were obtained with SATA at molar ratios of 12 SATA:1 Ab:40 maleimide spacer groups on the surface of one liposome. The highest coupling rates with SPDP were obtained at the ratio of 24 SPDP:1 Ab:40 liposomal maleimide groups, with an Ab binding efficiency of only 20-25%. The optimal in vitro binding conditions to specific target cells (EL4 for B8-24.3-liposomes and B16-F10 for IB16-6-liposomes) were determined by cytofluorometric measurement of the liposomal BHPD fluorescence with SATA linked Abs. Optimal immunoliposome binding to specific epitopes on the target cells was achieved with 1-2 Ab molecules coupled to one liposome, with immunoliposome concentrations of 20-130 nM and with a small incubation volume of 0.3-0.4 ml. The specificity of the binding of B8-24.3-liposomes to EL4 target cells was visualized by scanning electron microscopy. Antibody mediated endocytic uptake of immunoliposomes could be demonstrated by transmission electron microscopy.