Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 12 de 12
Filter
Add more filters










Publication year range
1.
Proc Natl Acad Sci U S A ; 120(1): e2206850120, 2023 01 03.
Article in English | MEDLINE | ID: mdl-36577066

ABSTRACT

Atomically dispersed catalysts have been shown highly active for preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX). However, their stability has been less than ideal. We show here that the introduction of a structural component to minimize diffusion of the active metal center can greatly improve the stability without compromising the activity. Using an Ir dinuclear heterogeneous catalyst (DHC) as a study platform, we identify two types of oxygen species, interfacial and bridge, that work in concert to enable both activity and stability. The work sheds important light on the synergistic effect between the active metal center and the supporting substrate and may find broad applications for the use of atomically dispersed catalysts.


Subject(s)
Carbon Monoxide , Hydrogen , Carbon Monoxide/chemistry , Oxidation-Reduction , Catalysis , Hydrogen/chemistry , Platinum/chemistry
2.
J Am Chem Soc ; 144(19): 8449-8453, 2022 05 18.
Article in English | MEDLINE | ID: mdl-35535858

ABSTRACT

Electrocatalytic ammonia oxidation at room temperature and pressure allows energy-economical and environmentally friendly production of nitrites and nitrates. Few molecular catalysts, however, have been developed for this six- or eight-electron oxidation process. We now report [Cu(bipyalk)]+, a homogeneous electrocatalyst that realizes the title reaction in water at 94% Faradaic efficiency. The catalyst exhibits high selectivity against water oxidation in aqueous media, as [Cu(bipyalk)]+ is not competent for water oxidation.


Subject(s)
Nitrates , Nitrites , Ammonia , Copper , Nitrogen Oxides , Oxidation-Reduction , Water
3.
Chem Sci ; 11(6): 1683-1690, 2020 Feb 14.
Article in English | MEDLINE | ID: mdl-32206289

ABSTRACT

The high-valent nickel(iii) complex Ni(pyalk)2 + (2) was prepared by oxidation of a nickel(ii) complex, Ni(pyalk)2 (1) (pyalk = 2-pyridyl-2-propanoate). 2 and derivatives were fully characterized by mass spectrometry and X-ray crystallography. Electron paramagnetic resonance spectroscopy and X-ray photoelectron spectroscopy confirm that the oxidation is metal-centered. 2 was found to react with a variety of phenolic and hydrocarbon substrates. A linear correlation between the measured rate constant and the substrate bond dissociation enthalpy (BDE) was found for both phenolic and hydrocarbon substrates. Large H/D kinetic isotope effects were also observed for both sets of substrates. These results suggest that 2 reacts through concerted proton-electron transfer (CPET). Analysis of measured thermodynamic parameters allows us to calculate a bond dissociation free energy (BDFE) of ∼91 kcal mol-1 for the O-H bond of the bound pyalk ligand. These findings may shed light onto CPET steps in oxidative catalysis and have implications for ligand design in catalytic systems.

4.
Inorg Chem ; 58(16): 10791-10801, 2019 Aug 19.
Article in English | MEDLINE | ID: mdl-31389243

ABSTRACT

Because of the thermodynamic demands of N2 cleavage, N2-derived nitride complexes are often unreactive. The development of multistep N2 functionalization reactions hinges on methods for modulating nitride reactivity with supporting ligands. Here, we describe the reactions of N2-derived Re-nitride complexes, including the first Re nitrides supported by a nitroxide-containing pincer ligand, and unusual examples of Re6+-nitride complexes. The previously reported N2-derived complex (PNP)Re(N)(Cl) (PNP = N(CH2CH2PtBu2)2) can be oxidized by O atom transfer to the backbone amide to form a novel nitroxide-pincer complex or by 1e- to form a rare S = 1/2 Re6+-nitride complex. The Re-nitrido interaction in a series of Re- and ligand-oxidized complexes is characterized using 15N NMR spectroscopy, IR spectroscopy, and DFT calculations, and shows changes in the Re-N bond order from both ligand- and metal-centered oxidations. Chemical oxidation of the supporting ligand to form a nitroxide-pincer ligand results in subtle electronic changes at Re and a more electron-deficient nitride ligand. Combined ligand- and metal-centered oxidation to form a Re6+-nitroxide complex results in a reversal of reactivity at the nitride ligand from nucleophilic to electrophilic. These systematic electronic structure and reactivity studies demonstrate methods for inducing reactivity in N2-derived nitride complexes.

5.
ACS Catal ; 9(4): 3228-3241, 2019 Apr 05.
Article in English | MEDLINE | ID: mdl-31007967

ABSTRACT

The nickel-catalyzed carboxylation of organic halides or pseudohalides using carbon dioxide is an emerging method to prepare synthetically valuable carboxylic acids. Here, we report a detailed mechanistic investigation of these reactions using the carboxylation of aryl halides with (PPh3)2NiIICl2 as a model reaction. Our studies allow us to understand several general features of nickel-catalyzed carboxylation reactions. For example, we demonstrate that both a Lewis acid and halide source are beneficial for catalysis. To this end, we establish that heterogeneous Mn(0) and Zn(0) reductants are multifaceted reagents that generate noninnocent Mn(II) or Zn(II) Lewis acids upon oxidation. In a key result, a rare example of a well-defined nickel(I) aryl complex is isolated, and it is demonstrated that its reaction with carbon dioxide results in the formation of a carboxylic acid in high yield (after workup). The carbon dioxide insertion product undergoes rapid decomposition, which ca These three oxidation states correspond to the onbe circumvented by a ligand metathesis reaction with a halide source. Our studies have led to both a revised mechanism and the development of a broadly applicable strategy to improve reductive carboxylation reactions. A critical component of this strategy is that we have replaced the heterogeneous Mn(0) reductant typically used in catalysis with a well-defined homogeneous organic reductant. Through its use, we have increased the range of ancillary ligands, additives, and substrates that are compatible with the reaction. This has enabled us to perform reductive carboxylations at low catalyst loadings. Additionally, we demonstrate that reductive carboxylations of organic (pseudo)halides can be achieved in high yields in more practically useful, non-amide solvents. Our results describe a mechanistically guided strategy to improve reductive carboxylations through the use of a homogeneous organic reductant, which may be broadly translatable to a wide range of cross-electrophile coupling reactions.

6.
Angew Chem Int Ed Engl ; 58(18): 6094-6098, 2019 Apr 23.
Article in English | MEDLINE | ID: mdl-30859704

ABSTRACT

A number of new transition metal catalyzed methods for the formation of C(sp2 )-C(sp3 ) bonds have recently been described. These reactions often utilize bidentate polypyridyl-ligated Ni catalysts, and paramagnetic NiI halide or aryl species are proposed in the catalytic cycles. However, there is little knowledge about complexes of this type. Here, we report the synthesis of paramagnetic bidentate polypyridyl-ligated Ni halide and aryl complexes through elementary reactions proposed in catalytic cycles for C(sp2 )-C(sp3 ) bond formation. We investigate the ability of these complexes to undergo organometallic reactions that are relevant to C(sp2 )-C(sp3 ) coupling through stoichiometric studies and also explore their catalytic activity.

7.
Organometallics ; 38(17): 3377-3387, 2019 Sep 09.
Article in English | MEDLINE | ID: mdl-32565607

ABSTRACT

Aryl carbonates, a common protecting group in synthetic organic chemistry, are potentially valuable electrophiles in cross-coupling reactions. Here, after performing a thorough evaluation of different precatalysts, we demonstrate that (dcypf)Ni(2-ethylphenyl)(Br) (dcypf = 1,1-bis-(dicyclohexylphosphino)ferrocene) is an efficient precatalyst for Suzuki-Miyaura reactions using a variety of aryl carbonates as substrates. Mechanistic studies indicate that (dcypf)Ni(2-ethylphenyl)(Br), which contains a bidentate phosphine that binds in a trans geometry, is an effective precatalyst for these reactions for two reasons: (i) it rapidly forms the Ni(O) active species and (ii) it minimizes comproportionation reactions between the Ni(O) active species and both the unactivated Ni(II) precatalyst and on-cycle Ni(II) complexes to form catalytically inactive Ni(I) species. In contrast, the state of the art precatalyst (dppf)Ni(o-tolyl)(Cl) (dppf = 1,1-bis(diphenylphosphino)ferrocene), which contains a bidentate phosphine that binds in a cis geometry, forms Ni(I) species during activation and is essentially inactive for aryl carbonate couplings. Although the exact reasons on a molecular level why the dcypf system is more active than the dppf system are unclear, our results indicate that in general Ni catalysts supported by the dcypf ligand will give better performance for catalytic reactions involving substrates which undergo relatively slow oxidative addition, such as aryl carbonates.

8.
Chemistry ; 24(37): 9417-9425, 2018 Jul 02.
Article in English | MEDLINE | ID: mdl-29663542

ABSTRACT

Coordination of redox-active ligands to metals is a compelling strategy for making reduced complexes more accessible. In this work, we explore the use of redox-active formazanate ligands in low-coordinate iron chemistry. Reduction of an iron(II) precursor occurs at milder potentials than analogous non-redox-active ß-diketiminate complexes, and the reduced three-coordinate formazanate-iron compound is characterized in detail. Structural, spectroscopic, and computational analysis show that the formazanate ligand undergoes reversible ligand-centered reduction to form a formazanate radical dianion in the reduced species. The less negative reduction potential of the reduced low-coordinate iron formazanate complex leads to distinctive reactivity with formation of a new N-I bond that is not seen with the ß-diketiminate analogue. Thus, the storage of an electron on the supporting ligand changes the redox potential and enhances certain reactivity.

9.
Organometallics ; 37(21): 3943-3955, 2018 Nov 12.
Article in English | MEDLINE | ID: mdl-31736532

ABSTRACT

There is currently significant interest in the development of efficient nickel precatalysts for cross-coupling. In this work, 14 nickel(II) precatalysts of the form (dppf)Ni(aryl)(X) (dppf = 1,1'-bis(diphenylphosphino)-ferrocene, X = Cl, Br) were synthesized. In particular, both the electronic and steric properties of the aryl group were modified to understand how this affects precatalyst activation. Using EPR spectroscopy, it was demonstrated that the amount of off-cycle nickel(I) species which are formed via comproportionation during precatalyst activation varies depending on the nature of the aryl group. For example, sterically bulky aryl groups reduce comproportionation. Additionally, the catalytic activity of the family of precatalysts was evaluated in five different Suzuki-Miyaura coupling reactions. The results from these catalytic studies provide information about how precatalyst structure affects catalytic efficiency, which may be useful for the rational design of improved nickel precatalysts for cross-coupling.

10.
Acc Chem Res ; 50(4): 952-959, 2017 04 18.
Article in English | MEDLINE | ID: mdl-28272869

ABSTRACT

Water-oxidation catalysis is a critical bottleneck in the direct generation of solar fuels by artificial photosynthesis. Catalytic oxidation of difficult substrates such as water requires harsh conditions, so the ligand must be designed both to stabilize high oxidation states of the metal center and to strenuously resist ligand degradation. Typical ligand choices either lack sufficient electron donor power or fail to stand up to the oxidizing conditions. Our research on Ir-based water-oxidation catalysts (WOCs) has led us to identify a ligand, 2-(2'-pyridyl)-2-propanoate or "pyalk", that fulfills these requirements. Work with a family of Cp*Ir(chelate)Cl complexes had indicated that the pyalk-containing precursor gave the most robust WOC, which was still molecular in nature but lost the Cp* fragment by oxidative degradation. In trying to characterize the resulting active "blue solution" WOC, we were able to identify a diiridium(IV)-mono-µ-oxo core but were stymied by the extensive geometrical isomerism and coordinative variability. By moving to a family of monomeric complexes [IrIII/IV(pyalk)3] and [IrIII/IV(pyalk)2Cl2], we were able to better understand the original WOC and identify the special properties of the ligand. In this Account, we cover some results using the pyalk ligand and indicate the main features that make it particularly suitable as a ligand for oxidation catalysis. The alkoxide group of pyalk allows for proton-coupled electron transfer (PCET) and its strong σ- and π-donor power strongly favors attainment of exceptionally high oxidation states. The aromatic pyridine ring with its methyl-protected benzylic position provides strong binding and degradation resistance during catalytic turnover. Furthermore, the ligand has two additional benefits: broad solubility in aqueous and nonaqueous solvents and an anisotropic ligand field that enhances the geometry-dependent redox properties of its complexes. After discussion of the general properties, we highlight the specific complexes studied in more detail. In the iridium work, the isolated mononuclear complexes showed easily accessible Ir(III/IV) redox couples, in some cases with the Ir(IV) state being indefinitely stable in water. We were able to rationalize the unusual geometry-dependent redox properties of the various isomers on the basis of ligand-field effects. Even more striking was the isolation and full characterization of a stable Rh(IV) state, for which prior examples were very reactive and poorly characterized. Importantly, we were able to convert monomeric Ir complexes to [Cl(pyalk)2IrIV-O-IrIVCl(pyalk)2] derivatives that help model the "blue solution" properties and provide groundwork for rational synthesis of active, well-defined WOCs. More recent work has moved toward the study of first-row transition metal complexes. Manganese-based studies have highlighted the importance of the chelate effect for labile metals, leading to the synthesis of pincer-type pyalk derivatives. Beyond water oxidation, we believe the pyalk ligand and its derivatives will also prove useful in other oxidative transformations.

11.
Chempluschem ; 81(10): 1129-1132, 2016 Oct.
Article in English | MEDLINE | ID: mdl-31964076

ABSTRACT

There is great interest in developing Mn water-splitting catalysts due to their low cost, abundance, and relevance to the oxygen-evolving complex (OEC). Three ligands with highly donating pyridine alkoxide moieties, including 2-(pyridin-2-yl)propan-2-ol (pyalkH), 2,2'-(pyridine-2,6-diyl)bis(propan-2-ol) (py-dialkH2 ), and 2-[(2,2'-bipyridin)-6-yl]propan-2-ol (bipy-alkH), have been screened with Mn for oxygen-evolution catalysis. Complexes with the ligand bipy-alkH were shown to evolve O2 when driven by Oxone (potassium peroxymonosulfate). The catalytic mixture generated from the precursor complex [Mn(bipy-alkH)Cl2 ] retained activity in unbuffered solution beyond 160 h.

12.
Beilstein J Org Chem ; 11: 2476-86, 2015.
Article in English | MEDLINE | ID: mdl-26732227

ABSTRACT

Complexes of the type (η(3)-allyl)Pd(L)(Cl) and (η(3)-indenyl)Pd(L)(Cl) are highly active precatalysts for the Suzuki-Miyaura reaction. Even though allyl and indenyl ligands are similar to cyclopentadienyl (Cp) ligands, there have been no detailed comparative studies exploring the activity of precatalysts of the type (η(5)-Cp)Pd(L)(Cl) for Suzuki-Miyaura reactions. Here, we compare the catalytic activity of (η(5)-Cp)Pd(IPr)(Cl) (IPr = 1,3-bis(2,6-diisopropylphenyl)-1,3-dihydro-2H-imidazol-2-ylidene, Cp) with two commercially available catalysts (η(3)-cinnamyl)Pd(IPr)(Cl) (Cin) and (η(3)-1-t-Bu-indenyl)Pd(IPr)(Cl) ( (tBu) Ind). We show that Cp gives slightly better catalytic activity than Cin, but significantly inferior activity than (tBu) Ind. This order of activity is rationalized by comparing the rates at which the precatalysts are activated to the monoligated Pd(0) active species along with the tendency of the starting precatalysts to comproportionate with monoligated Pd(0) to form inactive Pd(I) dimers. As part of this work the Cp supported Pd(I) dimer (µ-Cp)(µ-Cl)Pd2(IPr)2 (Cp (Dim) ) was synthesized and crystallographically characterized. It does not readily disproportionate to form monoligated Pd(0) and consequently Cp (Dim) is a poor catalyst for the Suzuki-Miyaura reaction.

SELECTION OF CITATIONS
SEARCH DETAIL
...