Effect of storage media on chondrocyte viability during cold storage of osteochondral dowels.

Osteochondral allograft transplantation is a successfully proven method to repair articular cartilage defects and prevent the degenerative effects of osteoarthritis. The number of osteochondral transplantations that can be performed each year is limited by availability of donor cartilage tissue and storage time constraints. Osteochondral transplantation success has been linked to high chondrocyte viability of the donor cartilage tissue at the time of implantation. Determining optimal storage conditions for donor cartilage is essential for tissue banks to safely provide quality cartilage tissue. In this study, we compared three tissue/cell media (DMEM/F12, RPMI-1640 and X-VIVO 10) for their ability to maintain chondrocyte viability during hypothermic storage for 28 days. Porcine osteochondral dowels were stored in each media for 28 days and cell viability was assessed every 7 days. Over the 28 day storage period, the chondrocyte viability of dowels stored in DMEM/F12, RPMI-1640, and X-VIVO 10 media all declined in a similar fashion. Our results show that all three media were equivalent in their ability to maintain cell viability of the cartilage tissue and provides rationale for the use of lower cost cell media (DMEM/F12 and RPMI-1640) for hypothermic storage of articular cartilage tissue.

Chondrocyte Viability of Particulated Porcine Articular Cartilage Is Maintained in Tissue Storage After Cryoprotectant Exposure, Vitrification, and Tissue Warming.

OBJECTIVE: Vitrification of articular cartilage (AC) is a promising technique which may enable long-term tissue banking of AC allografts. We previously developed a 2-step, dual-temperature, multi-cryoprotectant agent (CPA) loading protocol to cryopreserve particulated AC (1 mm3 cubes). Furthermore, we also determined that the inclusion of ascorbic acid (AA) effectively mitigates CPA toxicity in cryopreserved AC. Prior to clinical translation, chondrocytes must remain viable after tissue re-warming and before transplantation. However, the effects of short-term hypothermic storage of particulated AC after vitrification and re-warming are not documented. This study evaluated the chondrocyte viability of post-vitrified particulated AC during a 7-day tissue storage period at 4 °C. We hypothesized that porcine particulated AC could be stored for up to 7 days after successful vitrification without significant loss of cell viability, and these results would be enhanced when cartilage is incubated in storage medium supplemented with clinical grade AA. DESIGN: Three experimental groups were examined at 5 time points: a fresh control (only incubated in medium), a vitrified - AA group, and a vitrified + AA group (N = 7). RESULTS: There was a mild decline in cell viability but both treatment groups maintained a viability of greater than 80% viable cells which is acceptable for clinical translation. CONCLUSION: We determined that particulated AC can be stored for up to 7 days after successful vitrification without a clinically significant decline in chondrocyte viability. This information can be used to guide tissue banks regarding the implementation of AC vitrification to increase cartilage allograft availability.

Compressive mechanical properties of vitrified porcine menisci are superior to frozen and similar to fresh porcine menisci.

The common practice of freezing meniscal allograft tissue is limited due to the formation of damaging ice crystals. Vitrification, which eliminates the formation of damaging ice crystals, may allow the mechanical properties of meniscal allograft tissue to be maintained during storage and long-term preservation. The primary objective of this study was to investigate the differences between fresh, frozen, and vitrified porcine lateral menisci examining compressive mechanical properties in the axial direction. Unconfined compressive stress-relaxation testing was conducted to quantify the mechanical properties of fresh, frozen and vitrified porcine lateral menisci. The compressive mechanical properties investigated were peak and equilibrium stress, secant, instantaneous and equilibrium modulus, percent stress-relaxation, and relaxation time constants from three-term Prony series. Frozen menisci exhibited inferior compressive mechanical properties in comparison with fresh menisci (significant differences in peak and equilibrium stress, and secant, instantaneous and equilibrium modulus) and vitrified menisci (significant differences in peak stress, and secant and instantaneous modulus). Interestingly, fresh and vitrified menisci exhibited comparable compressive mechanical properties (stress, modulus and relaxation parameters). These findings are significant because (1) vitrification was successful in maintaining mechanical properties at values similar to fresh menisci, (2) compressive mechanical properties of fresh menisci were characterized providing a baseline for future research, and (3) freezing affected mechanical properties confirming that freezing should be used with caution in future investigations of meniscal mechanical properties. Vitrification was superior to freezing for preserving compressive mechanical properties of menisci which is an important advance for vitrification as a preservation option for meniscal allograft transplantation.

Vitrified Particulated Articular Cartilage for Joint Resurfacing: A Swine Model.

BACKGROUND: The use of particulated articular cartilage for repairing cartilage defects has been well established, but its use is currently limited by the availability and short shelf life of donor cartilage. Vitrification is an ice-free cryopreservation technology at ultralow temperatures for tissue banking. An optimized vitrification protocol has been developed for particulated articular cartilage; however, the equivalency of the long-term clinical efficacy of vitrified particulated articular cartilage compared with fresh articular cartilage has not yet been determined. HYPOTHESIS: The repair effect of vitrified particulated cartilage from pigs would be equivalent to or better than that of fresh particulated cartilage stored at 4°C for 21 days. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 19 pigs were randomly divided into 3 experimental groups: fresh particulated cartilage group (n = 8), vitrified particulated cartilage group (n = 8), and negative control group (no particulated cartilage in the defect; n = 3). An additional pig was used as the initial cartilage donor for the first set of surgical procedures. Pigs were euthanized after 6 months to obtain femoral condyles, and the contralateral condyle was used as the positive (no defect) control. Samples were evaluated for gross morphology using the Outerbridge and Osteoarthritis Research Society International (OARSI) scoring systems, histology (safranin O, collagen type I/II, DAPI), and chondrocyte viability using live-dead membrane integrity staining. RESULTS: There were no infections after surgery, and all 19 pigs were followed for the duration of the study. The OARSI grades for the fresh and vitrified particulated cartilage groups were 2.44 ± 1.35 and 2.00 ± 0.80, respectively, while the negative control group was graded significantly higher at 4.83 ± 0.29. Analysis of histological and fluorescent staining demonstrated that the fresh and vitrified particulated cartilage groups had equivalent regeneration within cartilage defects, with similar cell viability and densities and expression of proteoglycans and collagen type I/II. CONCLUSION: The implantation of fresh or vitrified particulated cartilage resulted in the equivalent repair of focal cartilage defects when evaluated at 6 months after surgery. CLINICAL RELEVANCE: The vitrification of particulated cartilage is a viable option for long-term storage for cartilage tissue banking and could greatly increase the availability of donor tissue for transplantation.

Effect of vitrification on mechanical properties of porcine articular cartilage.

Articular cartilage (AC) injuries do not heal primarily and large lesions progress to degenerative osteoarthritis. Osteochondral allograft transplantation is an effective surgical treatment but is limited by the lack of donor tissue availability. Fresh allografts can be stored hypothermically up to 28-45 days after which the tissue is no longer viable for transplantation. Vitrification is a method of cryopreservation with the potential to extend the storage time of AC. A specific protocol has been demonstrated to preserve high chondrocyte viability; however, its effect on various mechanical properties of the extracellular matrix (ECM) remains unknown and is the focus of this initial study. Porcine AC was subject to a defined vitrification protocol, using fresh and frozen samples as positive and negative controls, respectively; n = 20 for all three groups. Unconfined compression testing was used to assess mechanical properties of the tissue under rapid load, stress relaxation, and equilibrium conditions. The stress relaxation time constants (modeled with a 2-term Prony series) τ1 and τ2 were significantly lower for frozen (p = 0.014, p < 0.001) and vitrified (p = 0.009, p = 0.003) tissue compared to fresh, with no differences between frozen and vitrified samples (p = 0.848 and 0.105 for τ1 and τ2, respectively). These values indicate that frozen and vitrified samples relaxed more rapidly than fresh, which may suggest altered matrix composition and permeability post-treatment. These results represent the initial study in our experimental path to evaluate differences in mechanical properties of vitrified tissues.

Tensile mechanical properties of vitrified porcine menisci are superior to frozen and similar to fresh porcine menisci.

Vitrification inhibits crystallization of ice and may allow the mechanical properties of menisci to be preserved for transplantation without the damaging consequences of ice crystals formed during freezing. The primary objective of this study was to investigate the differences between fresh, frozen, and vitrified porcine lateral menisci examining tensile mechanical properties along the circumferential-peripheral, circumferential-central, longitudinal, and radial orientations. The secondary objective was to investigate the variations in the tensile mechanical properties of menisci comparing the circumferential-peripheral orientation to the three other orientations: circumferential-central, longitudinal, and radial. Quasi-static tensile testing was conducted to quantify the tensile mechanical properties of fresh, frozen and vitrified menisci. Ultimate tensile strength of frozen menisci were significantly decreased compared with fresh and vitrified menisci along three orientations: circumferential-peripheral, longitudinal, and radial. Along the circumferential-central orientation, tensile modulus of frozen menisci was significantly decreased compared with fresh menisci. The mechanical properties of vitrified menisci were comparable to fresh menisci along all four orientations. For all menisci (fresh, frozen and vitrified), ultimate tensile strength and failure strain along the circumferential-peripheral orientation were significantly increased compared with the three other orientations. Freezing was detrimental to the mechanical properties of menisci but vitrification likely avoided the negative effects of freezing thereby preserving mechanical properties that were comparable to fresh menisci. The findings of this study revealed that vitrification was superior to freezing for preserving mechanical properties of meniscal tissue; hence, vitrification is likely to be a competitive alternative to freezing for meniscal transplantation in the future.

Evaluation of the permeation kinetics of formamide in porcine articular cartilage.

Cryopreservation of articular cartilage will increase tissue availability for osteochondral allografting and improve clinical outcomes. However, successful cryopreservation of articular cartilage requires the precise determination of cryoprotectant permeation kinetics to develop effective vitrification protocols. To date, permeation kinetics of the cryoprotectant formamide in articular cartilage have not been sufficiently explored. The objective of this study was to determine the permeation kinetics of formamide into porcine articular cartilage for application in vitrification. The permeation of dimethyl sulfoxide was first measured to validate existing methods from our previously published literature. Osteochondral dowels from dissected porcine femoral condyles were incubated in 6.5 M dimethyl sulfoxide for a designated treatment time (1 s, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 60 min, 120 min, 180 min, 24 h) at 22 °C (N = 3). Methods were then repeated with 6.5 M formamide at one of three temperatures: 4 °C, 22 °C, 37 °C (N = 3). Following incubation, cryoprotectant efflux into a wash solution occurred, and osmolality was measured from each equilibrated wash solution. Concentrations of effluxed cryoprotectant were calculated and diffusion coefficients were determined using an analytical solution to Fick's law for axial and radial diffusion in combination with a least squares approach. The activation energy of formamide was determined from the Arrhenius equation. The diffusion coefficient (2.7-3.3 × 10-10 m2/s depending on temperature) and activation energy (0.9±0.6 kcal/mol) for formamide permeation in porcine articular cartilage were established. The determined permeation kinetics of formamide will facilitate its precise use in future articular cartilage vitrification protocols.

Effectiveness of Clinical-Grade Chondroitin Sulfate and Ascorbic Acid in Mitigating Cryoprotectant Toxicity in Porcine Articular Cartilage.

High concentrations of cryoprotective agents (CPAs) are required to achieve successful vitrification of articular cartilage; however, CPA cytotoxicity causes chondrocyte death. To reduce CPA toxicity, supplementation with research-grade additives, in particular chondroitin sulfate (CS) and ascorbic acid (AA), have previously been shown to improve chondrocyte recovery and metabolic function after exposure to CPAs at hypothermic conditions. However, it is necessary to evaluate the pharmaceutical equivalent clinical grade of these additives to facilitate the supplementation of additives into future vitrification protocols, which will be designed for vitrifying human articular cartilage in tissue banks. We sought to investigate the effectiveness of clinical-grade CS, AA, and N-acetylcysteine (NAC) in mitigating toxicity to chondrocytes during CPA exposure and removal, and determine whether a combination of two additives would further improve chondrocyte viability. We hypothesized that clinical-grade additives would exert chondroprotective effects comparable to those of research-grade additives, and that this protective effect would be enhanced if two additives were combined when compared with a single additive. The results indicated that both clinical-grade and research-grade additives significantly improved cell viability (p < 0.10) compared with the negative control (CPA with no additives). CS, AA, and NAC+AA increased cell viability significantly (p < 0.10) compared with the negative control. However, NAC, NAC+CS, and CS+AA did not improve cell viability when compared with the negative control (p > 0.10). We demonstrated that supplementation with clinical-grade CS or AA significantly improved chondrocyte viability in porcine cartilage subjected to high CPA concentrations, whereas supplementation with clinical-grade NAC did not benefit chondrocyte viability. Supplementation with clinical-grade additives in CPA solutions can mitigate CPA toxicity, which will be important in translating previously developed effective protocols for the vitrification of articular cartilage to human tissue banks.

Vitrification of particulated articular cartilage via calculated protocols.

Preserving viable articular cartilage is a promising approach to address the shortage of graft tissue and enable the clinical repair of articular cartilage defects in articulating joints, such as the knee, ankle, and hip. In this study, we developed two 2-step, dual-temperature, multicryoprotectant loading protocols to cryopreserve particulated articular cartilage (cubes ~1 mm3 in size) using a mathematical approach, and we experimentally measured chondrocyte viability, metabolic activity, cell migration, and matrix productivity after implementing the designed loading protocols, vitrification, and warming. We demonstrated that porcine and human articular cartilage cubes can be successfully vitrified and rewarmed, maintaining high cell viability and excellent cellular function. The vitrified particulated articular cartilage was stored for a period of 6 months with no significant deterioration in chondrocyte viability and functionality. Our approach enables high-quality long-term storage of viable articular cartilage that can alleviate the shortage of grafts for use in clinically repairing articular cartilage defects.

Vitrification of Intact Porcine Femoral Condyle Allografts Using an Optimized Approach.

OBJECTIVE: Successful preservation of articular cartilage will increase the availability of osteochondral allografts to treat articular cartilage defects. We compared the effects of 2 methods for storing cartilage tissues using 10-mm diameter osteochondral dowels or femoral condyles at -196°C: (a) storage with a surrounding vitrification solution versus (b) storage without a surrounding vitrification solution. We investigated the effects of 2 additives (chondroitin sulfate and ascorbic acid) for vitrification of articular cartilage. DESIGN: Healthy porcine stifle joints (n = 11) from sexually mature pigs were collected from a slaughterhouse within 6 hours after slaughtering. Dimethyl sulfoxide, ethylene glycol, and propylene glycol were permeated into porcine articular cartilage using an optimized 7-hour 3-step cryoprotectant permeation protocol. Chondrocyte viability was assessed by a cell membrane integrity stain and chondrocyte metabolic function was assessed by alamarBlue assay. Femoral condyles after vitrification were assessed by gross morphology for cartilage fractures. RESULTS: There were no differences in the chondrocyte viability (~70%) of 10-mm osteochondral dowels after vitrification with or without the surrounding vitrification solution. Chondrocyte viability in porcine femoral condyles was significantly higher after vitrification without the surrounding vitrification solution (~70%) compared to those with the surrounding vitrification solution (8% to 36%). Moreover, articular cartilage fractures were not seen in femoral condyles vitrified without surrounding vitrification solution compared to fractures seen in condyles with surrounding vitrification solution. CONCLUSIONS: Vitrification of femoral condyle allografts can be achieved by our optimized approach. Removing the surrounding vitrification solution is advantageous for vitrification outcomes of large size osteochondral allografts.

Osmometric Measurements of Cryoprotective Agent Permeation into Tissues.

Quantification of the amount of cryoprotective agent (CPA) in a tissue is an essential step in the design of successful cryopreservation protocols. This chapter details two inexpensive methods to measure cryoprotective agent permeation into tissues as functions of time. One of the methods to measure the CPA permeation is to permeate a series of tissue samples from a surrounding solution at a specified concentration of CPA, each sample for a different amount of time, and then to quantitate the amount of CPA that was taken up in the tissue during that time period. The quantification is performed by equilibrating the permeated tissue with a surrounding solution and then measuring the osmolality of the solution to determine the amounts of CPAs that have come out of each tissue sample corresponding to each permeation time. An alternative method to measuring the CPA permeation as a function of time, which requires fewer tissue samples, is to measure the CPA efflux as a function of time. In the efflux method, a CPA-permeated tissue sample is placed in a surrounding solution, and solution samples are taken at different time points throughout the efflux to quantitate how much CPA has left the tissue by each time point.

Review of non-permeating cryoprotectants as supplements for vitrification of mammalian tissues.

Vitrification of mammalian tissues is important in the areas of human assisted reproduction, animal reproduction, and regenerative medicine. Non-permeating cryoprotectants (CPAs), particularly sucrose, are increasingly used in conjunction with permeating CPAs for vitrification of mammalian tissues. Combining non-permeating and permeating CPAs was found to further improve post-thaw viability and functionalities of vitrified mammalian tissues, showing the potential applications of such tissues in various clinical and veterinary settings. With the rising demand for the use of non-permeating CPAs in vitrification of mammalian tissues, there is a strong need for a timely and comprehensive review on the supplemental effects of non-permeating CPAs toward vitrification outcomes of mammalian tissues. In this review, we first discuss the roles of non-permeating CPAs including sugars and high molecular weight polymers in vitrification. We then summarize the supplemental effects of non-permeating CPAs on viability and functionalities of mammalian embryos, and ovarian, testicular, articular cartilage, tracheal, and kidney tissues following vitrification. Lastly, challenges associated with the use of non-permeating CPAs in vitrification of mammalian tissues are briefly discussed.

Antioxidant additives reduce reactive oxygen species production in articular cartilage during exposure to cryoprotective agents.

High concentrations of cryoprotective agents (CPA) are required during articular cartilage cryopreservation but these CPAs can be toxic to chondrocytes. Reactive oxygen species have been linked to cell death due to oxidative stress. Addition of antioxidants has shown beneficial effects on chondrocyte survival and functions after cryopreservation. The objectives of this study were to investigate (1) oxidative stress experienced by chondrocytes and (2) the effect of antioxidants on cellular reactive oxygen species production during articular cartilage exposure to high concentrations of CPAs. Porcine cartilage dowels were exposed to a multi-CPA solution supplemented with either 0.1 mg/mL chondroitin sulfate or 2000 µM ascorbic acid, at 4 °C for 180 min (N = 7). Reactive oxygen species production was measured with 5 µM dihydroethidium, a fluorescent probe that targets reactive oxygen species. The cell viability was quantified with a dual cell membrane integrity stain containing 6.25 µM Syto 13 + 9 µM propidium iodide using confocal microscopy. Supplementation of CPA solutions with chondroitin sulfate or ascorbic acid resulted in significantly lower dihydroethidium counts (p < 0.01), and a lower decrease in the percentage of viable cells (p < 0.01) compared to the CPA-treated group without additives. These results indicated that reactive oxygen species production is induced when articular cartilage is exposed to high CPA concentrations, and correlated with the amount of dead cells. Both chondroitin sulfate and ascorbic acid treatments significantly reduced reactive oxygen species production and improved chondrocyte viability when articular cartilage was exposed to high concentrations of CPAs.

Comparison of three multi-cryoprotectant loading protocols for vitrification of porcine articular cartilage.

Vitrification is a cryopreservation technique for the long-term storage of viable tissue, but the success of this technique relies on multiple factors. In 2012, our group published a working vitrification protocol for intact human articular cartilage and reported promising chondrocyte recovery after using a four-step multi-cryoprotectant (CPA) loading method that required 570 min. However, this protocol requires further optimization for clinical practice. Herein, we compared three multi-step CPA loading protocols to investigate their impact on chondrocyte recovery after vitrification of porcine articular cartilage on a bone base, including our previous four-step protocol (original: 570 min), and two shorter three-step protocols (optimized: 420 min, and minimally vitrifiable: 310 min). Four different CPAs were used including glycerol, dimethyl sulfoxide, ethylene glycol and propylene glycol. As vitrification containers, two conical tubes (50 ml and 15 ml) were evaluated for their heat transfer impact on chondrocyte recovery after vitrification. Osteochondral dowels were cored into two diameters of 10.0 mm and 6.9 mm with an approximately 10-mm thick bone base, and then allocated into the twelve experimental groups based on CPA loading protocol, osteochondral dowel size, and vitrification container size. After vitrification at -196 °C and tissue warming and CPA removal, samples in all groups were assessed for both chondrocyte viability and metabolic activity. The optimized protocol proposed based on mathematical modelling resulted in similar chondrocyte recovery to our original protocol and it was 150 min shorter. Furthermore, this study illustrated the role of CPA permeation (dowel size) and heat transfer (container size) on vitrification protocol outcome.

Using engineering models to shorten cryoprotectant loading time for the vitrification of articular cartilage.

Osteochondral allograft transplantation can treat full thickness cartilage and bone lesions in the knee and other joints, but the lack of widespread articular cartilage banking limits the quantity of cartilage available for size and contour matching. To address the limited availability of cartilage, vitrification can be used to store harvested joint tissues indefinitely. Our group's reported vitrification protocol [Biomaterials 33 (2012) 6061-6068] takes 9.5 h to load cryoprotectants into intact articular cartilage on bone and achieves high cell viability, but further optimization is needed to shorten this protocol for clinical use. Herein, we use engineering models to calculate the spatial and temporal distributions of cryoprotectant concentration, solution vitrifiability, and freezing point for each step of the 9.5-h protocol. We then incorporate the following major design choices for developing a new shorter protocol: (i) all cryoprotectant loading solution concentrations are reduced, (ii) glycerol is removed as a cryoprotectant, and (iii) an equilibration step is introduced to flatten the final cryoprotectant concentration profiles. We also use a new criterion-the spatially and temporally resolved prediction of solution vitrifiability-to assess whether a protocol will be successful instead of requiring that each cryoprotectant individually reaches a certain concentration. A total cryoprotectant loading time of 7 h is targeted, and our new 7-h protocol is predicted to achieve a level of vitrifiability comparable to the proven 9.5-h protocol throughout the cartilage thickness.

Preference of diagnostic tools, medications, and devices for asthma management: A survey of doctors in Algeria.

AIM: This study aimed to evaluate the doctors' perspectives in using tools for diagnosis, prescribing medications, and devices for the treatment of asthma in Algeria. METHODS: Data were collected from randomly selected physicians, pediatricians, allergists, and pulmonologists through a questionnaire-based survey in 12 cities and 60 rural locations across Algeria. RESULTS: Of the 213 doctors who responded to the survey, >90% doctors attended an average of 20 asthma patients daily. Peak flow meter was used by 69% doctors for diagnosis and by 93% for monitoring of asthma. Spirometer was used by 76% doctors for diagnosis of asthma. Budesonide (86%), fluticasone (46%), and beclomethasone (40%) were the most prescribed inhaled corticosteroid (ICS) by doctors. Formoterol/budesonide was the most preferred ICS/long-acting ß2-agonist (LABA) (72%), followed by salmeterol/fluticasone (57%) for asthma treatment. Salbutamol was preferred by 93% doctors as reliever medication. ICS was the preferred controller in mild asthma (76%), and ICS/LABA combination in moderate (74%) and severe asthma (80%). Most doctors (94%) preferred pressurized metered-dose inhalers (pMDIs) with (46%) or without spacer (48%) for their asthma patients. About 83% doctors believed that pMDI with spacer would show a better outcome in asthma, over pMDI alone. Continuous exposure to allergens/smoking (73%) and incorrect inhaler technique (66%) were the most common reasons for uncontrolled asthma. CONCLUSION: The use of diagnostic tools in asthma was found to be adequate among the doctors in Algeria. Most of the doctors managed asthma in accordance with the global initiative for asthma guidelines. Spacers were found to be less prescribed in regular treatment, despite having good awareness about its better outcomes.

Evaluation of five additives to mitigate toxicity of cryoprotective agents on porcine chondrocytes.

Cryoprotective agents (CPAs) are used in cryopreservation protocols to achieve vitrification. However, the high CPA concentrations required to vitrify a tissue such as articular cartilage are a major drawback due to their cellular toxicity. Oxidation is one factor related to CPA toxicity to cells and tissues. Addition of antioxidants has proven to be beneficial to cell survival and cellular functions after cryopreservation. Investigation of additives for mitigating cellular CPA toxicity will aid in developing successful cryopreservation protocols. The current work shows that antioxidant additives can reduce the toxic effect of CPAs on porcine chondrocytes. Our findings showed that chondroitin sulphate, glucosamine, 2,3,5,6-tetramethylpyrazine and ascorbic acid improved chondrocyte cell survival after exposure to high concentrations of CPAs according to a live-dead cell viability assay. In addition, similar results were seen when additives were added during CPA removal and articular cartilage sample incubation post CPA exposure. Furthermore, we found that incubation of articular cartilage in the presence of additives for 2 days improved chondrocyte recovery compared with those incubated for 4 days. The current results indicated that the inclusion of antioxidant additives during exposure to high concentrations of CPAs is beneficial to chondrocyte survival and recovery in porcine articular cartilage and provided knowledge to improve vitrification protocols for tissue banking of articular cartilage.

The effect of additive compounds on glycerol-induced damage to human chondrocytes.

High concentrations of cryoprotective agents are required for cryopreservation techniques such as vitrification. Glycerol is a common cryoprotective agent used in cryopreservation protocols but this agent is toxic at high concentrations. This work is an attempt to mitigate the toxic effects of high concentrations of glycerol on intact chondrocytes in human knee articular cartilage from total knee arthroplasty patients by simultaneous exposure to glycerol and a variety of additive compounds. The resulting cell viability in the cartilage samples as measured by membrane integrity staining showed that, in at least one concentration or in combination, all of the tested additive compounds (tetramethylpyrazine, ascorbic acid, chondroitin sulphate, glucosamine sulphate) were able to reduce the deleterious effects of glycerol exposure when examination of membrane integrity took place on a delayed time frame. The use of additive compounds to reduce cryoprotectant toxicity in articular cartilage may help improve cell recovery after cryopreservation.

Ethylene glycol and glycerol loading and unloading in porcine meniscal tissue.

The development of a long-term storage method for meniscus, a complex tissue of the knee prone to injury, would improve the procedure and outcomes of meniscus transplantation. Cryopreservation uses cryoprotective agents (CPAs) including ethylene glycol (EG) and glycerol to preserve a variety of live tissues, and understanding of the CPA permeation kinetics will be critical in designing a vitrification protocol for meniscus. The purpose of this preliminary study was to understand the loading and unloading behaviours of EG and glycerol in meniscus by observing their efflux. For the main experiment, lateral and medial porcine menisci were incubated with CPA for 24 h at three temperatures (i.e., 4, 22, and 37 °C). Then, the menisci were immersed in 25 ml of X-VIVO™10 and CPA efflux was recorded by monitoring the molality of two consecutive washout solutions at different time points. In a subsequent experiment, menisci were incubated in the CPA solutions for 48 h at 22 °C, and the results were compared to those obtained at 22 °C in the main experiment. Results showed a rapid efflux of CPA from meniscus at the beginning of each wash. With increasing temperature, the amount of CPA efflux (and hence loading) increased. Using 24 h incubation, EG loaded the menisci more completely than glycerol. But after 48 h of incubation, both EG and glycerol achieved approximately the same degree of meniscus loading. This study provides preliminary data that will facilitate future design of experiments aimed at development of meniscus permeation studies.

Anatomical study: comparing the human, sheep and pig knee meniscus.

BACKGROUND: Animal models are commonly used in investigating new treatment options for knee joint injuries including injuries to the meniscus. The reliability and applicability of these models to replicate findings in humans depends on determining the most suitable animal proxy. Therefore, this study was designed to compare the wet weight, volume and dimensions of the human meniscus with two commonly used animal models: sheep and pig. METHODS: Human menisci (n = 6 pairs) were obtained from the knee joints of cadaveric male donors. Sheep menisci (n = 6 pairs) and pig menisci (n = 22 pairs) were obtained from the stifle joints of adult sheep and pigs. Meniscal wet weight, volume and dimensions of the body were measured and compared among the species. Anatomical dimensions included circumference, width, peripheral height, articular height and superior articular length. RESULTS: The circumference of human menisci (lateral: 84.0 mm, medial: 88.7 mm) was significantly longer than that of sheep (lateral: 50.0 mm, medial: 55.5 mm) and pig (lateral: 66.8 mm, medial: 64.9 mm). The majority of the remaining dimensions of the medial and all of the remaining dimensions of the lateral menisci in sheep showed no statistical difference in comparison to the human menisci. The meniscal weight in pig was significantly larger (lateral: 6.4 g, medial: 5.0 g) than the human (lateral: 4.9 g, medial: 4.4 g) and sheep (lateral: 2.5 g, medial: 2.2 g). Porcine meniscal volume (lateral: 6.5 ml, medial: 5.1 ml) was also larger than the human (lateral: 5.0 ml, medial: 4.5 ml) and sheep (lateral: 2.3 ml, medial: 2.2 ml) menisci. The dimensions measured in the pig meniscus were generally larger than human menisci with statistically significant differences in most categories. CONCLUSION: Sheep meniscal dimensions more closely matched human meniscal dimensions than the pig meniscal dimensions. This information may help guide the choice of an animal proxy in meniscal research.